TP-LINK KL430 Quick Installation Guide

Smart Light Strip www.tp-link.com

DOWNLOAD KASA

Get the Kasa Smart app from the

Apple App Store or Google Play.

STEP 1

Let’s get started with your new Smart Light Strip.

STEP 2

ADD TO KASA

Tap the button in the Kasa

app and select Smart Lights >

Smart Light Strip (Extension)

STEP 3

Simply follow the instructions in the

Kasa app to complete your Smart

Light Strip setup.

INSTALL & POWER UP

CAUTION: To reduce the risk of re, electric shock, or injury to persons:

• Use only insulated staples or plastic ties to secure cords;

• Not intended for recessed installation in ceilings, or sots;

• Do not use the device where wireless devices are not allowed;

• Keep the device away from water, re, wet or hot environments;

• Do not install in a compartment smaller than 43 inches by 12 inches by 12 inches;

• The maximum distance to the receptacle is determined by the length of adapter cord;

• Only use the control provided with or specied by these instructions to control this device;

•

Route and secure cords so that they will not be pinched or damaged when the cabinet is pushed to the wall;

•

Position the portable cabinet light with respect to the cabinet so the lamp replacement markings are

able to be read during replacing;

• The National Electrical Code (NEC) does not permit cords to be concealed where damage to insulation

may go unnoticed. To prevent re danger, do not run cord behind walls, ceilings, sots, or cabinets

where it may be inaccessible for examination. Cords should be visually examined periodically and

immediately replaced when any damage is noted.

Please read and follow the above safety information when operating the device. We cannot guarantee

that no accidents or damage will occur due to improper use of the device. Please use this product with

care and operate at your own risk.

Need some help?

Visit www.tp-link.com/support

for User Guides, FAQs, Warranty & more