Salvajor Disposers 75 Datasheet

Brand
Salvajor Disposers
Model
75
Type
Datasheet

This manual is also suitable for

FOOD WASTE DISPOSER
SPECIFICATIONS
CORROSION RESISTANT BODY
Permanent molded from heat treated aluminum alloy.
TEFLON LIP WATER SEAL
Protects the motor from damage by water.
TAPERED ROLLER BEARING
Provides longer motor life, quiet operation and
shock absorbing.
WATER COOLED MOTOR
Provides maximum efficiency and longer life.
QUIET OPERATION
Extra thick rubber mounting adaptor and drain outlet
isolates sound and eliminates vibration.
■■
■■
115 Volts 1 Phase 17.8 Amps
■■
■■
208 Volts 1 Phase 9.9 Amps
■■
■■
230 Volts 1 Phase 9.0 Amps
■■
■■
208 Volts 3 Phase 4.2 Amps
■■
■■
230 Volts 3 Phase 4.0 Amps
■■
■■
460 Volts 3 Phase 2.1 Amps
FULL LOAD AMPS
SCRAP
RING
ALL PIPING
1
/2"
1
/2" FIXED
NOZZLE
FOOD WASTE
DISPOSER
DISPOSER
CONTROL
OPTIONAL
CONE COVER
VACUUM
BREAKER
2" DRAIN
SOLENOID
VALVE W/
WATER
FLOW
CONTROL
JOB: Item No.:
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
NEMA 4 Watertight Controls
Optional Line Disconnect (LD) available on MSS, MRSS, & ARSS
Cone Assembly
TABLE CUT-OUT:
12” CONE - 12
7
/8”
15” CONE - 15
7
/8”
18” CONE - 18
7
/8”
NOTE: INSTALL PER ALL APPLICABLE CODES
3
/4 H.P. Model 75
MRSS
MSS
ARSS
ARSS-2
Salvajor Model 75
Food Waste Disposer 3⁄4HP
–
1 Phase & 3 Phase
D E T A I L S A N D D I M E N S I O N S
SPECIFICATIONS:
MOUNTING – Rubber adaptor above grind chamber
and rubber drain outlet isolates sound and eliminates
vibration. No metal to metal contact.
EXTERIOR HOUSING – Permanent molded from
heat treated, corrosion resistant aluminum alloy then
c
omputer machined to a smooth polished finish. Paint free.
SHREDDER – 8 inch diameter, machined high strength,
wear resistant hardened carbide alloy.
ROTOR – 8 inch diameter with 2 cutter bars, machined
high strength, wear resistant hardened carbide alloy.
MOTOR – 3⁄4 HP totally enclosed. Water cooled for
efficiency and longer life. Built-in manual reset thermal
overload protection. Available in 208 volts or 115/230
volts, 60 cycle, 1 phase and 208-230/460 volts, 60 cycle,
3 phase.
BEARINGS – Tapered roller (top)
Sealed ball (bottom)
SEAL – Teflon Lip Water Seal.
WATER REQUIREMENT – 5 gallons of cold
water per minute.
WASTE OUTLET – Rubber drain accepts 2” piping.
DUAL DIRECTION GRINDING – Designed to
operate in either direction. Direction of rotation can be
controlled when installed with automatic reversing controls.
Reversing rotation can double cutting teeth life.
LEG SUPPORT
(
Optional
)
– Single leg, adjustable.
ASSEMBLIES: (See Specification Sheet)
CA – Cone Assembly with 12”, 15” or 18” Cone
SA – Sink Assembly with 3
1
⁄2” or 6
1
⁄2” Sink Collar
DISPOSER CONTROLS: (See Specification Sheet)
MSS: (Non Reversing)
MRSS: (Manual Reversing)
ARSS-2: (Automatic Reversing)
ARSS: (Automatic Reversing)
Printed in USA
Form No.S75-9-BH
The Salvajor Company 4530 East 75th Terrace Kansas City, Missouri 64132-2081, USA
1
-
800
-
SALVAJOR (816) 363
-
1030 FAX
:
1
-
800
-
832
-
9373
www.salvajor.com Email: sales@salvajor.com service@salvajor.com
Manufacturers of Commercial Food Waste Disposing Systems since 1944
SAMPLE SPECIFICATION
75- CA-18 MSS
(
230/60/3
)
Model Cone Disposer
Size Control
Assembly
Electrical
Specs.
◆ SPECIFY EXACT OPERATING VOLTAGE ◆
18" (45.72)
20
7
/8" (53.02)
1
/2" FIXED
N
OZZLE
6
1
/2"
(
16.51)
5
5
/8" (14.29)
5
5
/8"
(14.29)
1
/2" NPT
W
ATER INLET
14
1
/8"
(35.92)
8
1
/2"
(21.59)
8
1
/2"
(21.59)
21
7
/16"
(54.45)
POWER
ENTRANCE
RESET
BUTTON
13"
(33.02)
18" CONE
2"
DRAIN
5
5
/8" (14.29)
3
/4" (1.91)
1
/2" NPT
WATER INLET
9
1
/4"
(23.50)
8
1
/2"
(21.59)
8
1
/2" (21.59)
15
13
/16"
(40.16)
POWER
ENTRANCE
RESET
BUTTON
13"
(33.02)
2"
DRAIN
14
7
/8" (37.78)
5
5
/8"
(14.29)
12" (30.48)
6
1
/2"
(16.51)
12" CONE
17
7
/8" (45.40)
5
5
/8" (14.29)
15" (38.10)
15" CONE
6
1
/2"
(16.51)
3
1
/2" SINK MOUNT
3
1
/2" (8.89)
SINK OPENING
6
1
/2" SINK MOUNT
ADJUSTABLE LEG
(OPTIONAL)
6
5
/8" (16.83)
CUTOUT
10
9
/16"(26.78)
to
14
3
/16"(35.99)
NOTE: Dimensions in parenthesis are in centimeters
(Specifications subject to change without notice)
Current specification details may be found online at www.salvajor.com
  • Page 1 1
  • Page 2 2

Salvajor Disposers 75 Datasheet

Brand
Salvajor Disposers
Model
75
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents