Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG01.26 Rev. 09/08
Catalog Specification Sheet No.
EG01.26
RediPak
®
Wire Shelving Units
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Options / Accessories
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
RediPak
®
Wire Shelving Units
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
MODELS:
1836*63
1836*63-5
1836*
74
1836*74-5
1848*63
1848*
63-5
1848*74
1848*74-5
1860*63
1860*
63-5
1860*74
1860*74-5
Certifications / Approvals
Short Form Specifications
Eagle RediPak
®
(EAGLEBrite
®
Zinc, Chrome, Valu-Master
®
Gray
Epoxy, Valu-Gard
®
Green Epoxy, EAGLEgard
®
Green Epoxy)
Wire Shelving Unit, model _______________. Patented
QuadTruss
®
design wire shelves, two-piece post assemblies,
and tapered split sleeves packaged in one complete box.
2436*
63
2436*
63-5
2436*74
2436*74-5
2448*
63
2448*63-5
2448*74
2448*
74-5
2460*63
2460*63-5
2460*
74
2460*74-5
Dividers
Ledges
* See charts on back for complete model numbers.
Design and Construction Features
• Patented QuadTruss
®
design (patent #5,390,803) makes
shelves up to 25% stronger and provides a retaining ledge
for increased stability and product retention.
• Available in 18˝ and 24˝ (457 and 610mm) widths and
36˝, 48˝ and 60˝ (914, 1219 and 1524mm) lengths.
• Complete shelving unit in one box.
• The combination of numerically-calibrated posts, tapered
split sleeves, and shelf collars makes assembling these
units a simple, three-step exercise:
1) assemble two-piece post by threading top half onto bolt
in lower half;
2) snap split sleeves onto post over number of your choice;
3) and slide shelf collar over split sleeves.
• A positive lock between shelf and post is created without
the use of any tools.
• Shelving units may be adjusted or completely changed just
as easily.
• Offered in five finishes: EAGLEbrite
®
zinc, chrome,
Valu-Master
®
gray epoxy, Valu-Gard
®
green epoxy, and
EAGLEgard
®
green epoxy.
four-shelf unit