1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Copyright © 2007 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
Flexible Keyboards—
USB, PS/2 and Wireless
Models: IN3008KB, IN3009KB and IN3010KB
Owner’s Manual
Special Features
Important Warnings
System Requirements
IN3008KB & IN3009KB Installation
IN3010KB Installation
Warranty Registration
Limited Warranty
2
2
2
2
3
4
4
Español
Français
5
9
WARRANTY
REGISTRATION:
Register online today for a
chance to win a FREE Tripp Lite
product! www.tripplite.com/warranty
200711031 93-2705 Noteables keyboard OM.qxd 11/7/2007 4:46 PM Page 1
2 3
PS/2 Installation
1. Shut down your computer.
2. Plug the keyboard's USB connector into the PS/2
adapter included with the keyboard.
3. Plug the PS/2 adapter into the PS/2 keyboard port
on your computer. (Note: The PS/2 keyboard port
may be marked in purple, with or without a
keyboard icon. If you are uncertain which port to
use, consult your computer's documentation.)
4. Restart your computer. The keyboard should be
ready to use.
USB Installation
1. Plug the keyboard's USB connector into an
available USB port on your computer or USB hub.
2. Installation is plug-and-play for Windows
ME/2000/XP/Vista.
3. The keyboard should be ready to use.
(Note: If the keyboard is not recognized by
your computer's operating system, try
restarting your computer.)
USB Connector
Keyboard
USB Port
Special Features
• It can be used in a damp, acidic or alkaline environment
• It can be cleaned with alcohol or disinfectant
• It can be used safely in the presence of dust or sand
• It can be rolled up for compact storage while traveling
• It includes a USB wired cable and PS/2 adapter
Important Warnings
• Do not use the keyboard on an uneven or unstable surface
• Do not puncture, cut or abrade the surface of the keyboard
• Do not allow oil, acetone or similar solvents to touch the keyboard
• Do not fold the keyboard nor crease it when rolling it up
• Turn off your computer before connecting the keyboard via PS/2
System Requirements
• Windows
®
98/ME/2000/XP/Vista
• Available USB or PS/2 port
IN3008KB & IN3009KB Installation
IN3010KB Installation
1. Your IN3010KB (2.4 GHz) Wireless Multimedia
Flexible Keyboard package includes a wireless
flexible keyboard, USB receiver, CD with driver
and AAA batteries.
2. Remove the battery compartment lid on the left side
of the keyboard and insert two AAA batteries
provided. Be careful not to load the batteries
incorrectly—look for guide marks inside the
compartment to check correct battery orientation.
Replace the battery compartment lid.
3. Connect the USB receiver to an open USB port on
your computer or to a port on an additional USB
hub. The blue LED indicator on the receiver will
flash. This indicates that the receiver is connected
and functioning.
4. Next, press the Windows key on the keyboard. If this key is functional, the connection is complete and
the keyboard is operating normally.
5. If you have Windows 98 or 2000 operating system, install and run the CD driver included to make all
the multimedia keys functional. The driver will automatically start to guide you step-by-step in
activating all multimedia functions and completing the installation. NOTE: The maximum transmission
distance is approximately 30ft (10m). The operational distance will vary based on the environment the
keyboard is used in and the amount of interference encountered.
Troubleshooting Your IN3010KB Wireless Multimedia Flexible Keyboard
If you have completed all installation steps and the
keyboard still does not function, the receiver and
transmitter have lost auto-recognition and must be
reconnected. (The receiver and transmitter have auto-
recognition capability and have been preset to the same
channel during production. Normally you should not
need to reset them during installation.) To re-establish
the connection, press the connect button on the receiver
and the connect button on the bottom of the keyboard at
the same time. The receiver's blue LED should flash quickly, indicating the recognition procedure was
successful. Next, press the Windows key and the keyboard should be fully functional. Repeat the
recognition process until the receiver and keyboard are linked.
If after extended use the keyboard begins to respond slowly, replace the batteries. Alkaline, Li Ion or
rechargeable batteries are recommended replacements and should provide many hours of use.
Hot Keys Guide
Your IN3010KB Wireless Multimedia Flexible Keyboard comes preset with the following multimedia hot keys:
PS/2 Port
PS/2 Adapter
USB Connector
Keyboard
2.
3.
CONNECT
Button
Indicator
200711031 93-2705 Noteables keyboard OM.qxd 11/7/2007 4:46 PM Page 2
5
4
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference. (2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does
cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Notice: Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to
operate the device.
CE Mark Statement
This device has passed testing performed according to the following European standards, as specified by the European
Telecommunications Standards Institute:
• ETSI EN 300 328 (FHSS)
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.
Warranty Registration
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date
of initial purchase. TRIPP LITE's obligation under this warranty is limited to repairing or replacing (at its sole option) any such
defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from
TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment,
which has been damaged by accident, negligence or misapplication or has been altered or modified in any way. EXCEPT AS
PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of
implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser, EXCEPT AS PROVIDED
ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specially, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss
of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
1111 W. 35th Street
Chicago, IL 60609 USA
Soporte a Clientes: (773) 869-1234
www.tripplite.com
Derechos de Autor © 2007 Tripp Lite. Todos los derechos reservados.
Todas la marcas registradas son totalmente propiedad de sus respectivos dueños.
Teclados Flexibles—
para USB, PS/2, e inalámbrico
Modelos: IN3008KB, IN3009KB e IN3010KB
Manual del Propietario
Características Especiales
Advertencias Importantes
Requerimientos del Sistema
Instalación del IN3008KB e IN3009KB
Instalación del IN3010KB
Garantía Limitada
6
6
6
6
7
8
English
Français
1
9
200711031 93-2705 Noteables keyboard OM.qxd 11/7/2007 4:46 PM Page 4
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Tripp Lite IN3009KB User manual
- Category
- Keyboards
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Tripp Lite IN3009KB Manuel utilisateur
- español: Tripp Lite IN3009KB Manual de usuario
Related papers
-
Tripp Lite PS3612 User manual
-
-
-
-
-
Tripp Lite B022-002-KT-R User manual
-
-
-
-
Other documents
-
Digitus DA-20146 Installation guide
-
Memorex MP3112 User manual
-
Gyration JJ4-AS00764 User manual
-
Rosewill RK-9000V2 RE User manual
-
UPM TR310 Owner's manual
-
Legrand 53877-53880 Owner's manual
-
Approx APPKBWSLITE User guide
-
Allen-Bradley RediPANEL Installation guide
-
Thermador DC36MTW Installation guide
-