Tefal FR401616 User manual

www.tefal.com

FAMILY

PRO-FRYER

F

E

S

I

NL

D

GB

P

N

DK

FIN

Page is loading ...

11

Safety instructions

This appliance complies with the safety regulations and directives in effect at the time of manufacture.

Check that the power supply voltage corresponds to that shown on the appliance (alternating current).

Given the diverse standards in effect, if the appliance is used in a country other than that in which it is purchased, have it checked

by an approved Service Centre.

This appliance is designed for domestic use only. In case of professional use, inappropriate use or failure to comply with the

instructions, the manufacturer accepts no responsibility and the guarantee does not apply.

Read and follow the instructions for use. Keep them safe.

Connecting to the power supply

• Do not use the appliance if the appliance or the cord is damaged, if the appliance has fallen or shows visible damage or does

not work properly.

In the event of the above, the appliance must be sent to an approved Service Centre. Do not take the appliance apart yourself.

• Always plug the appliance into an earthed socket.

• Do not use an extension lead. If you accept liability for doing so, only use an extension lead which is in good condition, has

an earthed connection and is suited to the power of the appliance.

• If the power supply cord is damaged, it must be replaced by the manufacturer, an authorised service centre or a similarly

qualified person in order to avoid any danger.

• Do not leave the cord hanging.

• Do not unplug the appliance by pulling on the cord.

• Always unplug the appliance: immediately after use, when moving it, prior to any cleaning or maintenance.

Using

• Use a flat, stable, heat-resistant surface, away from any water splashes.

• This appliance is not designed to be used by people (including children) with a physical, sensory or mental impairment, or

people without knowledge or experience, unless they are supervised or given prior instructions concerning the use of the

appliance by someone responsible for their safety.

• Children must be supervised to ensure that they do not play with the appliance.

• This electrical equipment operates at high temperatures which may cause burns. Do not touch the apparent metal parts, filter

or window….

• Do not switch on the appliance near to flammable materials (blinds, curtains….) or close to an external heat source (gas stove,

hot plate etc.).

• In the event of fire, never try to extinguish the flames with water. Close the lid. Smother the flames with a damp cloth.

• Do not move the appliance when it is full of liquids or hot food.

• If you have a removable bowl, never take it out when the fryer is switched on.

• Never immerse the appliance or the electrical control unit in water!

• Before throwing away your appliance, the timer battery must be removed and disposed of separately by an approved Service

Centre (depending on model).

Cooking

• Never plug in the deep fryer without oil or fat inside. The oil level must always be between the min and max markers.

• If you use solid vegetable fat, cut it into pieces and melt it over a slow heat in a separate pan beforehand, then slowly pour it

into the deep fryer bowl. Never put solid fat directly into the deep fryer bowl or fryer basket as this will lead to incorrect

operation of the appliance.

• Do not mix different types of oil.

• Do not overfill the basket, never exceed the maximum capacity.

Recommendations

• Limit the cooking temperature to 190°C, especially for potatoes.

• Use the basket for chips.

• Control the cooking: Do not eat burnt food.

• Clean your oil after every use to avoid burnt crumbs and change it after every 8 to 12 uses.

• Eat a balanced and varied diet which includes plenty of fruits and vegetables.

• Store your fresh potatoes in a room above 8°C.

• For best results and fast cooking, we recommend that you limit the quantity of chips to 1/2 basket per frying.

• For a larger quantity of food or potatoes, the temperature drops very fast just after having lowered the basket. This lowers the

oil temperature considerably and it is normal for the temperature to take a long time to return to 190° C.

GB

12

Component description

1. Lid

a. Filter cover

b. Permanent filter

c. Handle

d. Viewing window

e. Lid

2. Removable control unit with heating element

3. Frying basket

a. Handle unlocking button

b. Basket handle with raising & lowering

positions

4. Min. and Max. oil level markings

5. Removable bowl

6. Safety carrying handles

7. Housing

8. Feet

9. Electronic panel

a. Temperature ready light

b. Power light

c. LCD screen

d. Menu button

e. Mode button

f. + and - buttons

g. Cancel button

h. Confirm button

Before using for the first time

• The fryer can be completely dismantled.

• Remove the lid and clean it with a damp cloth. Dry thoroughly.

• Lift the basket handle horizontally until you hear a “click” as it locks.

• Remove the basket, the control unit - fig.1 and the bowl - fig.2.

• Clean the frying basket and the bowl with a sponge and soapy water or put

them in the dishwasher - fig.3.

• Clean the control unit and the heating element with a damp cloth.

• Dry all components thoroughly.

• Place the bowl - fig.4 and the heating element in position - fig.5.

Filling the bowl

• Fill the bowl with oil.

• The oil level should always be between the MIN and MAX level of the bowl. Do

not exceed the maximum fill line as boiling oil may overflow during frying and

can cause severe burns - fig.6.

• For best results we recommend a good quality blended vegetable oil. If using

sunflower oil ensure the oil is changed every 5 uses. Oils which should not be

used under any circumstances and may cause overflowing/smoking/risk of fire

are: ground nut oil, soya oil, olive oil, lard or dripping.

• If you use solid vegetable oil, cut it into small pieces and melt it in a separate

pan. Pour the melted oil into the fryer bowl.

• Never melt solid fat on the heating element or in the frying basket.

Do not immerse the

control unit with the

heating element in water.

Never wash the lid in the

dishwasher.

Make sure that the control

unit is correctly positioned

otherwise the fryer cannot

function.

Never use different types

of oil at the same time as

this may cause the oil to

overflow.

The oil level must always

be kept between the

min/max markers. Check

the level each time before

frying, and add some of

the same type of oil if

necessary.

Preparation

Model Oil Solid vegetable oil

3 Litres

Min. 2.5 l 2250g

Max. 3 l 2700 g

4 Litres

Min. 3.5 l 3150 g

Max. 4 l 3600 g

13

Preheating

• After the bowl has been filled with oil, put the lid on the fryer and plug in the

appliance without the frying basket. The control unit beeps and the power

indicator light begins to flash. The control unit is in standby; it does not heat.

The LCD screen shows the default setting, which is Chips, with a temperature of

190°C and a cooking time of 8 minutes.

• Select the menu:

Press the MENU button - fig.7 on the control unit to select the corresponding

MENU setting according to the food you want to fry.

There are four pre-set menu settings as shown in the table below.

You can move from one menu setting to another by pressing the MENU button

repeatedly.

After having chosen the appropriate MENU setting, you can confirm both the

pre-set temperature and time by pressing the CONFIRM button - fig.8. The

power light will switch on and the fryer will begin to heat.

• You can also change the default setting as follows:

• Change the default setting:

• Press the MODE button. The thermometer icon and the temperature will flash.

Press the + or – button to set the desired temperature. The temperature is

adjustable from 60°C to 195°C in 1°C increments. If you press the + or – button

continuously, the scrolling will be faster.

• Press the MODE button again, the clock icon and the time will flash. Set the

desired time by pressing the + or – button. The time is adjustable from 0 to 99

minutes in 30 seconds increments. If you press the + or – button continuously,

the scrolling will be faster.

After the desired temperature and time have been set, press the CONFIRM

button.

The power light will switch on and the fryer will begin to heat.

• You can fry other types of food than the ones which are pre-programmed by

modifying the temperature and the time of any of the menus.

• Temperature and time follow-up:

At the beginning of the preheating, the LCD screen shows the current (before

heating) temperature of the oil. It then will increase until it reaches the set

temperature. In this way, you can monitor the oil as it reaches the desired

temperature.

Filling the basket

• Remove excess water, ice or frost from food.

• Fill the basket before placing it in the deep fryer. Do not overfill the basket.

Reduce the quantities for frozen foods - fig.9.

• Remove the lid.

Cut food into similar-sized

pieces so that they cook

evenly. Avoid using pieces

that are too thick.

Place the fryer:

- on a steady surface

- out of the reach of

children

- away from water or heat

sources.

Never operate your fryer

without any oil or fat in

the bowl.

You can fry other types of

food than the ones which

are pre-programmed by

modifying the temperature

and time of one of the

menus.

If you set the time to

0 and confirm this setting,

the heating element will

begin to heat and continue

heating during 30 minutes

or until you turn it off by

pressing the CANCEL

button.

After having pressed the

CONFIRM button, only the

+ and - buttons will still

work. In case of mistake

and to start the selection

again, press the CANCEL

button.

COOKING MENUS

Fresh or Frozen food Cooking Time Temperature

Chips (fresh) 8 minutes 190°C

Chicken (fresh) 15 minutes 180°C

Onion Rings (frozen) 4 minutes 190°C

Fish (fresh) 7 minutes 170°C

GB

14

• Place the frying basket on the edge of the bowl and leave the handle in the

horizontal position.

• Put the lid back on the fryer.

Cooking

Lowering the basket

• When the oil has reached the correct temperature, the ready light (green)

comes on and the control unit beeps.

• Press the handle unlocking button and fold the handle very slowly into its

housing to lower the basket into the oil - fig.10. Plunging the basket too rapidly

in the oil may cause it to overflow.

• Press the CONFIRM button. The timer will start to count down.

• You can modify the cooking time during the cooking by pressing the + or –

buttons.

• During cooking, it is normal for the temperature light to go on and off.

At the end of cooking time

Frying is complete when:

• The timer sounds, indicating the cooking time has elapsed and the food is the

desired colour and texture.

• If you wish to continue cooking after the time has elapsed, add some cooking

time by pressing the + button. The timer starts to count down.

• At the end of cooking time, switch off the fryer by pressing the CANCEL button.

• Lift the handle horizontally to raise the basket until you hear a "click" as it locks.

Allow excess oil to drain by letting the basket remain on the hook for a moment.

• Remove the lid.

• Remove the basket.

• Serve the food.

• Put the lid on the fryer when it is not in use.

• To use a second time, correct the oil level if necessary, then follow the instructions

from the beginning.

Switching off the deep fryer

• When you have finished frying, unplug the fryer.

• Allow the oil to cool completely in the fryer (approx. 3 hours).

• Move the fryer using the carrying handles.

Shake frozen food to

remove excess pieces of ice

away from the deep fryer.

For crispier frozen chips,

wash them in cold water

and dry them carefully.

When the fryer is in use,

some parts will be

extremely hot and can

cause severe burns. Steam

coming from the filter is

also extremely hot - fig.11.

Only touch the knobs and

handles of the fryer for your

safety.

For crispy fried food, remove

the lid as soon as you have

finished cooking to prevent

steam.

For your security, if no food

is put into the oil after the

ready light has come on,

the control unit will turn

off the appliance after 30

minutes. Regardless of the

recipe, food must be dried

thoroughly before frying.

This will prevent the oil

from splattering and/or

overflowing and will

extend the life of the oil.

Never move the fryer while

the oil or fat is still hot.

15

Table of cooking times

• The cooking times are a guide only. They may vary depending on the size of

the food, the amount of food, individual preferences, and the voltage.

• Cooking tip: To prevent food from sticking together, do not use the basket

when cooking battered foods or doughnuts.

* time wil be based on size

For best results and to prevent

overflowing, use the traditional

French method of frying chips

cut from potatoes:

- first frying at 160°C

*

- let them rest until they are

slightly cooled

- second frying at 190°C

*

.

* in 2 fryings

FRESH FOOD

Quantity

Chips *

(maximum capacity 3 L model)

800 g

160°C*

190°C

+/- 7 - 9 min.

+/- 5 - 7 min.

Chips *

(maximum capacity 4 L model)

1 kg

160°C*

190°C

+/- 7 - 9 min.

+/- 5 - 7 min.

Chips (optimal quantity 3 L model ) 400 g 190°C +/- 6 - 8 min.

Chips (optimal quantity 4 L model ) 500 g 190°C +/- 8 - 10 min.

Fried mushrooms 300 g 150°C +/- 6 - 8 min.

Onions rings 300 g 170°C +/- 4 - 5 min.

Breaded fish fillets 2 pieces 170°C +/- 6 - 8 min.

Fried squid 500 g 170°C +/- 5 - 6 min.

Fried prawns 500 g 170°C +/- 5 - 6 min.

Apple fritters 4 pieces 170°C +/- 5 - 6 min.

FROZEN FOOD

Quantity

Chips (maximum capacity 3 L model) 600 g 190°C +/- 8 - 10 min.

Chips (maximum capacity 4 L model) 750 g 190°C +/- 8 - 11 min.

Chips (optimal quantity 3 Lmodel) 300 g 190°C +/- 5 - 7 min.

Chips (optimal quantity 4 L model) 375 g 190°C +/- 5 - 7 min.

Chicken nuggets (maximum capacity 3 L model ) 1 kg 190°C +/- 6 - 9 min.

Chicken nuggets (maximum capacity 4 L model ) 1,2 kg 190°C +/- 7 - 10 min.

Fried mushrooms 300 g 190°C +/- 5 - 6 min.

Onions rings 300 g 190°C +/- 3 - 5 min.

Battered cod fillets 2 pieces 190°C +/- 6 - 7 min.

Fish fingers 5 pieces 190°C +/- 5 - 7 min.

Fried squid 500 g 190°C +/- 4 - 5 min.

Fried prawns 500 g 190°C +/- 4 - 5 min.

GB

16

Cleaning

Filtering the oil

• Remove the basket and the lid.

• Empty the fat gently into a pan.

• Place a filter paper in the bottom of the basket.

• Clean inside the bowl.

• Place the basket and filter paper into the bowl (handle in the upper position).

• Pour the oil carefully through the filter paper back into the bowl.

• Throw the filter paper away and clean the basket.

• You may store the oil or fat in the fryer, or in a separate airtight container.

• Do not pour used oil into the sink. Leave it to cool, and throw it away with the

household waste – according to the local community regulations.

• Crumbs that break away from food tend to burn and alter the quality of the oil

more rapidly. Over time, this increases the risk of catching fire. For this reason,

filter the oil regularly.

Cleaning the fryer

• Remove the control unit and heating element and clean both parts with a damp

cloth or sponge.

• Clean the lid using a sponge and soapy water. Rinse and dry carefully - fig.12.

• The filter in the lid can be cleaned. Remove the filter cover, then the filter.

• The bowl, the frying basket, the housing and the filter are dishwasher safe or can

be immersed in soapy water.

• Ensure all components are dry before placing them back inside the fryer.

• The lid is fitted with a permanent metallic filter. This filter does not need to be

replaced.

Never immerse the control

unit with the heating

element in water and never

wash it under running

water.

Never wash the lid in the

dishwasher.

Do not store your deep

fryer outside.

We recommend changing

the oil after a maximum of

8 to 10 uses. Some oils

should be changed more

frequently such as

sunflower oil.

Environment protection first!

Your appliance contains valuable materials which can be recovered or recycled.



Leave it at a local civic waste collection point.

Any batteries should be removed and disposed of separately by an approved

Service Centre (depending on model).

17

PROBLEMS AND POSSIBLE CAUSES SOLUTIONS

The LCD screen of the fryer is not lit up.

The appliance is not plugged in. Plug-in the appliance.

The fryer is not heating

The CONFIRM button on control panel has not been

pressed.

Press the CONFIRM button after having chosen the

cooking menu.

The control unit returned to standby mode after 30

minutes as the unit was not operated or as no food

was put in the oil after the READY light was on.

Press the CONFIRM button after having chosen the

cooking menu for the second time.

Timer does not count down after the ready light turns on

The CONFIRM button has not been pressed on control

panel to start the timer.

Press the CONFIRM button when lowering the basket

into the oil.

Oil overflows

The basket was lowered too quickly.

Lower the basket slowly and keep a close eye on the

oil level.

Cooking freshly made chips at 160/190°C for the first

fry.

It is important to double-fry freshly made chips and to

respect the recommended cooking temperature (see

p.15)

The Max. marker for filling the bowl has been

exceeded.

Check the oil level (Max.), and remove the excess.

The frying basket has been overfilled with food. Check that the basket is not too full.

Food is wet or contains too much water (frozen food).

Remove any ice and dry the food thoroughly. Lower

the basket slowly.

Different types of oil/fat have been mixed. Empty and clean the bowl. Refill the bowl with one

type of oil.

The fat/oil is unsuitable. Use a good quality blended vegetable oil (see p.12 for

advice on oil to use).

Emits unpleasant smells

The fat/oil has deteriorated.

Replace the frying oil (after 12 uses max.), more

frequently depending on the oil.

The fat/oil is unsuitable. Use a good quality blended vegetable oil (see p.12 for

advice on oil to use).

Vision through the viewing window is not clear

The window is not cleaned often enough or is not

cleaned the right way.

To ensure good visibility, clean the viewing window by

wiping it with soap and water. Allow the window to

dry at room temperature or dry with a clean cotton

cloth. Clean as often as necessary.

Food does not become golden, and remains soft

Food is moist and contains too much water (frozen

food).

Remove as much ice from the frozen food as possible

before frying. Dry freshly made chips well.

Pieces are too thick and contain water.

Experiment by lengthening the cooking time or by

slicing food smaller and thinner.

Too much food is being cooked at the same time and

the cooking oil is not at the right temperature.

Fry food in small quantities (especially when frozen).

The temperature of the frying oil may not be high

enough: the temperature is set incorrectly.

Set the thermostat control to the recommended

temperature.

Chips stick together

Unwashed food immersed in hot oil.

Wash and cut potatoes well to remove excess starch,

and dry them thoroughly.

If you have any product problem or queries, please consult our website - www.tefal.co.uk

If your fryer does not work properly

GB

Page is loading ...

Tefal FR401616 User manual

This manual is also suitable for

Tefal FR401616 User manual

in other languages

Related papers

Other documents