Front Runner RRAC272 Installation guide

Brand
Front Runner
Model
RRAC272
Type
Installation guide

Front Runner RRAC272 is a mounting bracket system designed for solar panels. It provides a secure and adjustable way to attach solar panels to a variety of surfaces, including vehicle roofs, racks, and other flat surfaces. The brackets are made of durable aluminum and are designed to withstand the rigors of outdoor use. They are also compatible with a wide range of solar panel sizes and shapes.

Here are some of the benefits of using Front Runner RRAC272:

  • Adjustable: The brackets can be adjusted to fit a variety of solar panel sizes and shapes.
  • Durable: The brackets are made of durable aluminum and are designed to withstand the rigors of outdoor use.

Front Runner RRAC272 is a mounting bracket system designed for solar panels. It provides a secure and adjustable way to attach solar panels to a variety of surfaces, including vehicle roofs, racks, and other flat surfaces. The brackets are made of durable aluminum and are designed to withstand the rigors of outdoor use. They are also compatible with a wide range of solar panel sizes and shapes.

Here are some of the benefits of using Front Runner RRAC272:

  • Adjustable: The brackets can be adjusted to fit a variety of solar panel sizes and shapes.
  • Durable: The brackets are made of durable aluminum and are designed to withstand the rigors of outdoor use.
RRAC272_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS
front runner
RRAC272
ENG
1
Thank you for purchasing a Front Runner Universal Mounting Brackets For Solar Panels.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
Refer to Page 2 for a list of all the components, quantities and tools required.
READ ME !
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
UNIVERSAL MOUNTING BRACKETS
FOR SOLAR PANELS
RRAC272_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS
2
TOOLS NEEDED
FIGURE 1.1
CHECK ONLINE FOR THE LATEST FITMENT GUIDE WWW.FRONTRUNNEROUTFITTERS.COM
GET ORGANIZED
1
1
2
3
IN THE BOX
1 4 X Mouting Bracket
2 12 X M8 x 16 Hex Head Screw
3 12 X M8 Nylock Nut
4 8 X M8 Nut Cap
5 4 X Flat Washer M8 x 16 x 1.6
13mm
5
4
RRAC272_REV_A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS
3
FIT AND SECURE 2
2.1
2.2
2.3
Loosely assemble the Universal Solar Panel
Mounting Brackets (Item 1) to your solar
panel using M8 x 16 Hex Bolts, the M8 x 16
Washers and M8 Nylock Nuts (Items 2 , 3 &
5)
Measure and space the Universal Solar
Panel Mounting Bracket (Item 1) to a pitch
of 202mm and fully tighten.
Slide the M8 x 16 Hex Bolts (Item 2) into the
slats machined slots to the corresponding
slats. Fasten the the Universal Mounting
Bracket (Item 1) to the slats with the M8 Hex
Nuts (Item 3).
1
3
5
2
13mm
202 mm
Tightening Torque:
M8 : 15-20Nm / 11.06 ft lb - 14.75 ft lb
Tightening Torque:
M8 : 15-20Nm / 11.06 ft lb - 14.75 ft lb
3
4
2
1
13mm
13mm
Place M8 Nut Caps (Item 4) over
the M8 Nylock Nuts (Item3).
RRAC272_REV _A00 © 2023 FRONT RUNNER VEHICLE OUTFITTERS
4
INSTALL OTHER VEHICLE AND RACK ACCESSORIES
4
Now's the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam
Share your adventures on:
FINISH
3
Congratulations! You did it. Take a step back and admire your work!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Front Runner RRAC272 Installation guide

Brand
Front Runner
Model
RRAC272
Type
Installation guide

Front Runner RRAC272 is a mounting bracket system designed for solar panels. It provides a secure and adjustable way to attach solar panels to a variety of surfaces, including vehicle roofs, racks, and other flat surfaces. The brackets are made of durable aluminum and are designed to withstand the rigors of outdoor use. They are also compatible with a wide range of solar panel sizes and shapes.

Here are some of the benefits of using Front Runner RRAC272:

  • Adjustable: The brackets can be adjusted to fit a variety of solar panel sizes and shapes.
  • Durable: The brackets are made of durable aluminum and are designed to withstand the rigors of outdoor use.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents