2. Pulse
  3. LCD-PM200

Pulse LCD-PM200 Operating instructions

  • Hello! I'm here to assist you with the PULSE LCD-PM200 TV Pole Mount. I've reviewed the instruction manual, and it covers safety precautions, assembly steps, and specifications. The mount supports VESA patterns, various screen sizes and has tilt and swivel adjustments. Feel free to ask me any questions about the device or the contents of this manual.
  • What is the maximum weight this mount can support?
    What screen sizes are compatible with this mount?
    Can this mount be used outdoors?
    How often should I check the mount for safety?
    What VESA patterns does this mount support?
Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of
purchase for a replacement.
Check that the product is secure and safe to use at regular intervals (at least every three months).
TV POLE MOUNT
Instruction Manual
LCD-PM200
25kg
(55lbs)
RATED
25kg
(55lbs)
RATED
VESA Compatible
75x75 100x100
200x100 200x200
42"
MAX
5
minØ28-maxØ50mm
F
DB
C
TOP
3
6
4
1
2
A (x1) G (x1)
B (x1)
D8 (x4)
M-F
M5x14
M-B
(x4) M6x14
M-C
(x4)
M8x20
M-D
(x4) M-G (x8)
M4x14
M-A
(x4)
D(x4)
M-E
5
C (x2) D (x2)
4mm
E (x1)
+10°
-15°
Firmly tighten the screws to
prevent the mount from sliding
down the pole.
6mm
F (x1)
A
G
E
±60°
±60°
TOP
M-D
M-F
M-D
M-F
M-G M-G
M-A
M-B
M-E
M-C
M-F
/