2. Hill-Rom
  3. 767-Series Wall / Mobile Sphygmomanometers

Hill-Rom 767-Series Wall / Mobile Sphygmomanometers Installation guide

  • Hello! I've analyzed the provided document regarding the Tycos 7670-09 Rail Mount Kit for the 767 Wall Aneroid. This document provides detailed assembly instructions, explaining how to attach the rail mount using a nut, screw and included hex wrench. I'm here to answer any questions you may have about the installation process.
  • What is the first step in assembling the rail mount kit?
    What should you do after placing the NUT?
    What tool is recommended to tighten the screw?
Tycos 7670-09
Rail Mount Kit
for
767 Wall Aneroid
Installation Instructions
Assemble parts as shown:
1) Place flat side of NUT in groove in basket. Position
and hold NUT with hole aligned with hole in basket.
2) Place RAIL MOUNT on outside of BASKET and hold
in place.
3) Insert SCREW through RAIL MOUNT and BASKET
into NUT. Turn SCREW into NUT.
4) Slide RAIL MOUNT toward top of BASKET.
5) Tighten SCREW with hex wrench supplied.
Welch Allyn, Inc.
4341 State Street Road, Skaneateles Falls, NY USA
Printed in USA 95P404 Rev. F
Tycos 7670-09
Rail Mount Kit
for
767 Wall Aneroid
Installation Instructions
Assemble parts as shown:
1) Place flat side of NUT in groove in basket. Position
and hold NUT with hole aligned with hole in basket.
2) Place RAIL MOUNT on outside of BASKET and hold
in place.
3) Insert SCREW through RAIL MOUNT and BASKET
into NUT. Turn SCREW into NUT.
4) Slide RAIL MOUNT toward top of BASKET.
5) Tighten SCREW with hex wrench supplied.
Welch Allyn, Inc.
4341 State Street Road, Skaneateles Falls, NY USA
Printed in USA 95P404 Rev. F
/