morse 515-N-117 User manual

I have reviewed the CE Declaration of Conformity for the MORSE 50Hz 515 Series Scale-Equipped Vertical-Lift Drum Pourers. This document confirms the product's compliance with relevant European directives and standards related to electromagnetic compatibility, low voltage, and machinery safety. I am ready to assist with any questions you have about this product and the information within this document.
What is the model of the product?

What standards does this product comply with?

What is the serial number range?

The Specialist In Drum Handling Equipment

CE Declaration of Conformity

50Hz 515 Series

Scale-Equipped Vertical-Lift Drum Pourers

Syracuse, NY, 13208 U.S.A.

morsedrum.com (315) 437-8475

CE Declaration of Conformity

This product has been tested to the current appropriate standards

and is in compliance with the following

-------------------------------------------------------------------

EMC Directive: 2014/30/EU

Generic Emissions Standard: EN 61000-6-4:2007

Product Specic Emissions: EN 55011 Class A

Generic Immunity Standard: EN 61000-6-2: 2005

Immunity: EN 61000-4-2 Electrostatic Discharge

EN 61000-4-6 Conducted Susceptibility

Low Voltage Directive: 2014/35/EU

Standard: EN 60204-1 Safety of Machinery

Machinery Directive: 2006/42/EC

Standard: EN 60204 Safety of Machinery

-------------------------------------------------------------------

Manufacturer’s Name: MORSE Mfg. Co., Inc.

Manufacturer’s Address: 103 Kuhn Rd.

Syracuse, NY 13208

Product: Scale-Equipped Vertical-Lift Drum Pourers

Model: 50Hz 515 Series

Serial Number: 400000 and up

-------------------------------------------------------------------

This Certicate of Compliance issued 2022 is valid for the test sample of the product specied

above and that it conforms to the Directive(s) and Standard(s).

Signature:

Nathan Andrews

President

Morse Manufacturing Company, Inc.

103 Kuhn Rd.

Syracuse, New York, USA 13208

Phone: (315)-437-8475

Fax: (315)-437-1029