2. morse
  3. 525-N-117

morse 525-N-117, 525-N-127 User manual

  • I've reviewed the CE Declaration of Conformity for the MORSE Drum Pourer 50Hz 525 Series. This document outlines the product's compliance with various European directives and safety standards including EMC, Low Voltage and Machinery directives. The document also mentions specific EN standards for emissions, immunity and safety. I am ready to assist you with any questions you have regarding this document or the Drum Pourer.
  • What is the product?
    What is the model series?
    What directives does the product comply with?
    What are the generic emissions standards for this product?
Copyright 2022 - Morse Mfg. Co., Inc. Form DC525_50 (Updated 2 Sep., 2022) 1
The Specialist In Drum Handling Equipment
CE Declaration of Conformity
50Hz 525 Series
Scale-Equipped Vertical-Lift Drum Pourers
[email protected] 103 Kuhn Rd.
Syracuse, NY, 13208 U.S.A.
morsedrum.com (315) 437-8475
CE Declaration of Conformity
This product has been tested to the current appropriate standards
and is in compliance with the following
-------------------------------------------------------------------
EMC Directive: 2014/30/EU
Generic Emissions Standard: EN 61000-6-4:2007
Product Specic Emissions: EN 55011 Class A
Generic Immunity Standard: EN 61000-6-2: 2005
Immunity: EN 61000-4-2 Electrostatic Discharge
EN 61000-4-6 Conducted Susceptibility
Low Voltage Directive: 2014/35/EU
Standard: EN 60204-1 Safety of Machinery
Machinery Directive: 2006/42/EC
Standard: EN 60204 Safety of Machinery
-------------------------------------------------------------------
Manufacturer’s Name: MORSE Mfg. Co., Inc.
Manufacturer’s Address: 103 Kuhn Rd.
Syracuse, NY 13208
Product: Scale-Equipped Vertical-Lift Drum Pourers
Model: 50Hz 525 Series
Serial Number: 400000 and up
-------------------------------------------------------------------
This Certicate of Compliance issued 2022 is valid for the test sample of the product specied
above and that it conforms to the Directive(s) and Standard(s).
Signature:
Nathan Andrews
President
Morse Manufacturing Company, Inc.
103 Kuhn Rd.
Syracuse, New York, USA 13208
Phone: (315)-437-8475
Fax: (315)-437-1029
/