Vortex RAZOR HD User manual

RAZOR HD
Vortex
Brand
Vortex
Model
RAZOR HD
Type
User manual

Vortex RAZOR HD: Capture stunning images and videos with your DSLR or point-and-shoot camera using the fine optics of your Razor HD spotting scope. Easily connect the adapter to your spotting scope and camera, choose the appropriate camera adapter ring, and start exploring the world of digiscoping. Whether you're a birdwatcher, wildlife enthusiast, or outdoor adventurer, the possibilities are endless.

Vortex RAZOR HD: Capture stunning images and videos with your DSLR or point-and-shoot camera using the fine optics of your Razor HD spotting scope. Easily connect the adapter to your spotting scope and camera, choose the appropriate camera adapter ring, and start exploring the world of digiscoping. Whether you're a birdwatcher, wildlife enthusiast, or outdoor adventurer, the possibilities are endless.

VORTEX
THE FORCE OF OPTICS
RAZOR
HD
Digital Adapter
TM
®
TM
3
RAZOR
HD
HD
Digital Adapter
The
Congratulations on your purchase of the Vortex
Razor HD Digital Adapter. This adapter lets you
take advantage of the fine optics of the Razor HD
spotting scope for digiscoping with a variety of digital
cameras.
TM
TM
Connect the Adapter to the Spotting Scope
Attach the Adapter to the Digital Camera
Service and Repair Policy
DSLR Cameras
Digital Point-and-Shoot Cameras
www.vortexoptics.com
4
Camera Adapter Ring
Camera Adapter
Thumbscrew
Camera Adapter
Eyepiece Sleeve
Eyepiece Sleeve
Thumbscrew
www.vortexoptics.com
5
Connect the Adapter to the Spotting Scope
The Razor HD digital adapter connects DSLR and digital point-and-shoot cameras to a
Razor HD spotting scope.
To use the Razor HD digital
adapter, you will first need
to connect the eyepiece
sleeve to the Razor HD
spotting scope. The eyepiece
sleeve will allow easy
access to the magnification
adjustment ring and the
twist-up eyecup.
Camera Adapter Ring
Eyepiece Sleeve
Camera Adapter
www.vortexoptics.com
6
1. Remove the eyepiece from the Razor HD spotting scope and
slip the eyepiece through the top end of the eyepiece sleeve.
2. Thread the Razor HD eyepiece back onto the spotting scope,
turning the eyepiece clockwise until it clicks in place.
3. Tighten the eyepiece sleeve thumbscrew and twist the
eyecup up or down as needed for the most
comfortable viewing with or without eyeglasses.
Assembly Steps:
www.vortexoptics.com
7
The second step involves mounting your
digital camera on the Razor HD digital
adapter. Choose the camera adapter ring that
fits the thread size of your digital camera.
Choose the Proper Camera Adapter Ring
Attach the Adapter to the Digital Camera
Note: Some digital cameras may require an
additional lens accessory.
www.vortexoptics.com
Note: Please refer to specific instructions
for mounting DSLR cameras.
9
2.
3.
Accessory lens adapter threads
match the camera adapter ring.
Most digital point-and-shoot cameras require an accessory lens adapter (not included). You
may also need to add a step ring between the Razor HD
camera adapter ring and your camera’s lens or accessory
lens adapter.
Digital Point-and-Shoot Cameras
1. Thread the correct camera adapter ring onto
your camera lens, accessory lens adapter, or
step ring.
2. Thread the camera adapter onto the camera
adapter ring.
3. Slip the camera adapter and ring assembly
onto the eyepiece sleeve, then tighten the
thumbscrew on the camera adapter.
www.vortexoptics.com
10
Service and Repair Policy.
Vortex wants you to use and enjoy your Razor HD digital
adapter with complete confidence, and that’s why our warranty
is so straightforward.
Rest assured that if you have questions about this digital
adapter, or should ever require service, all you need to do is
contact Vortex for absolutely free service:
• Call 800-426-0048
• E-mail [email protected]
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
800-426-0048
www.vortexoptics.com
[email protected]
U
NCONDITIONAL
L
IFETIME
W
ARRANTY
www.vortexoptics.com
8
DSLR cameras usually require a fixed 50mm lens for digiscoping. You may need to add a step
ring (not included) before attaching one of the Razor HD camera adapter rings to your camera.
DSLR Cameras
1. Thread the correct camera adapter ring onto
your camera lens or step ring.
2. Thread the camera adapter onto the camera
adapter ring.
3. Slip the camera adapter and ring assembly
onto the eyepiece sleeve, then tighten the
thumbscrew on the camera adapter.
1.
2.
www.vortexoptics.com
Call Vortex Optics at 800-426-0048 with
questions about lens compatibility.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Vortex RAZOR HD User manual

RAZOR HD
Vortex
Brand
Vortex
Model
RAZOR HD
Type
User manual

Vortex RAZOR HD: Capture stunning images and videos with your DSLR or point-and-shoot camera using the fine optics of your Razor HD spotting scope. Easily connect the adapter to your spotting scope and camera, choose the appropriate camera adapter ring, and start exploring the world of digiscoping. Whether you're a birdwatcher, wildlife enthusiast, or outdoor adventurer, the possibilities are endless.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents