Rubine RGH-LATINO2B-BL User manual

Brand: Rubine

Model: RGH-LATINO2B-BL

Type: User manual

INTELLIGENT GAS BUILT-IN HOB

RGH-LATINO2B-BL

www.rubine.com.my

After Sales Service : 1800-282-093

(10) RATING LABEL

( 1 0 )

(8)PACKING LIST

Name

Qty Qty

Note Note

Gas cooker

Cutting paper

Pan support

Wok stand

Instruction Manual

Fixer

Electric connector

Work stand

(9) TO USER ABOUT THE ENVIRONMENT PROTECTION

To user: Please do not throw away the packing parts, and please sent the carton box, foam, plastic

bag to the recycle bin, in order to protect our world together. Thanks.

1 0

CONTENTS

SPECIAL PRECAUTIONS

PARTS IDENTIFICATION

INSTALLATION

DIRECTION FOR USE

CLEANING AND MAINTENANCE

TROUBLE-SHOOTING GUIDE

FAULT CODE HANDLING

PACKING LIST

TO USER ABOUT THE ENVIRONMENT PROTECTION

Thank you for choosing INTELLIGENT GAS BUILT-IN HOB

In order to obt

△

Trouble

Reason

Code

Arrangement

Alarm for “Burners

can not be ignited”

Th e ho b wi l l be tu r n e d off

automatically if it can not be ignited,

the screen will display the code and

having heard the sound of continuous

sparks for 15 seconds.

Alarm for “Frame is

extinguished”

T h e h o b w i l l b e t u r n e d o f f

automatically; the screen will display

the code and having heard the sound of

continuous sparks for 15 seconds.

Alarm for “Electrical

machine breakdown”

The magnetic valve for the hob will be

turned off automatically; the screen will

display the code and having heard the

sound of continuous sparks for 15

seconds.

Alarm for “Thermal

couple breakdown”

T h e h o b w i l l b e t u r n e d o f f

automatically; the screen will display

the code and having heard the sound of

continuous sparks for 15 seconds.

Alarm for

“Communication

breakdown”

The system will keep testing the

communicate status after the battery

charge is done. If the communication is

breakdown, The hob will be turned off

automatically; the screen will display

the code and having heard the sound of

continuous sparks for 15 seconds.

Remarks:

1.Trouble with mark “O” can be solve by the final user; trouble with mark “△” must be repair

by technical people. If the user can not solved the trouble according to the method above please

contact with our after-sales department immediately.

2.The hob should not be used when hearing the sound of alarm.

(7) TROUBLE CODE

Alarm for

“MagnetValve

Non-working Cautio”

In thesituation of unconnect or carve

out, the caution device of the magnet

valve willhave a discontinuous buzzer

alarm for 15 seconds.

△

Alarm for

“Motorand Magnet

Valve Non-working

Caution”

When the failure happen on the motor

and magnet valve of one burner,then

both of the burner can not ignition and

will have a discontinuous buzzer

alarmfor 15 seconds.

△

RG H - L A T I N O 2 B - BL

78 0 X 4 6 0

16 0

Remarks: above is the build-in hob structure and part identification for FT-788L.

Other type of hob please refers to above picture.

Ignitor

Top plate

Inner Burner Cap

Outer Berner Cap

Thermal Couple

Model

Size

Project

Length(mm)×width(mm)

Height (mm)

Height(from bottom to top plate)

Remarks: Please check the detail parameter for the hob as nameplate shows.

（3）

2.PRODUCT PACKING DIMENSION

Control Plate

If the r em aining t im e is 10 s ec on d, the last 10 second wi ll be counted down on the s cr ee n with

short spa rk , in order to remind th e user.

To c ancel t he “O ff timer ”

Under the “ Off timer” s tatus, press “ ” ke y to ca ncel th e “ Off tim er”;o r you c an pr es s

the “ ” k ey for tw o times , the n re-se t the t ime t o “00 ”t o can ce l the “Off timer”.

Remarks:

1.For the newly install hob or hob not used for some time, it may fail to ignite at the first time because

there is not air in the tube, you can repeat until the air is exhausted out, and it will work.

2.If there is yellowish flame or uneven flame, adjust the damper at the bottom to get a normal

frame. (as Fig. 11)

Inner damper

Turn up

Outer damper

Turn down

Fig. 11

Timer

710

390

(3)INSTALLATION

(4)DIRECTION FOR USE

1.Open holes in the cupboard:

Open holes in the cupboard with the instruction paper in the package, hole size: 710mm×

390mm.(see Fig. 2)

2.Install the gas pipe

A.If to use plastic tube: put in the airproof caution, connect the tube and hob connector, and

fasten the clip. (See )

B.If to use metal tube: put in the airproof caution, and fasten the nuts on the connection.

(See 4).

Fig. 3

Fig.

3.Put the hob in the right hole on the cupboard, check whether it is installed in a balance.

The bottom of top plate should be stuck with seal packing.

4.Check leakage: turn on the gas valve; check whether there is leakage in the connection with

soap water. If any leakage, it needs to be reinstalled. (there will be air bubble for leakage).

Fig. 2

Fig. 5

Fig. 6

Fig. 7

Fig. 3

Fig. 4

window blinds

Ignition safety hob have flame failure protect device, when accident flame failure occurs by wind or

spilled liquid, the flame failure protect device will shut the gas supply automatically.

1.Put in battery properly. (Battery case in the right-front side at the bottom of the hob.)

OUTLET

ON/OFF

ADAPTER

POWER PORT

OUTLET AT THE BOTTOM

Fig. 8

Fig. 9

2.Turn on the gas supply,

Turn on the power switch, switch stepping motor to zero, and check whether there is signal.

1)Timing、firepower display full screen for 1 second, having heard the sound of continuous

sparks .

2)After 1 second, Nixie tube displays “___ ___” but nothing else.

3)The screen will be clear after 6 seconds, system step into Standby time, the indicator

light of children-lock been on.( see Fig. 8)

Power

ON/L ON/R

Lock/L

Lock/R

High

Power Low

Timer

High

Power Low

Power

ON/L ON/R

Lock/L

Lock/R

High

Power Low

Timer

High

Power Low

Remark: Any operation is not allowed during the above process.

Start up (unlock).

Keep pressing on the “ ” for 2 second, indicator light off, (as Fig 9) the system is operable after

the sound of short sparks. After that, press “ ”, left hob been on, screen displays the current

firepower. The default option for the fire power is 5 (the maximum valve), and the fire power is

adjustable, as follows:

Lock/L

ON/L

2、1. fire control:

You can choose five different flame by turning the hob:

Press “ ” when the hob is on, system steps into fire control status, the screen displays

twinkling “ ”. Press “ ” to adjust the fire power.

The “children-lock” will be locked if there is no operation within 15 second, the indicator light

on.

fire

Power

FIRE POWER

Inner ring

Outer ring

Level 1

Level 2 Level 3 Level 4

Level 5

Low

Off

High

Off

Low

Medium

Maximum

AIR VENT

Press shortly, timer will steps into the next stage orderly, press lasting, timer will change to indicated

stage as the table above.

If the timer shows “ ”, press “-” can jump to “ ” minute for setting.

If the timer shows “ ” minutes, press “+” key can jump to “ ”, then press “+” key you can re-set

the timer from “ ”.

Remarks: To cancel the Hand operation for the timer off, you can re-set the timer to “00” then

take your hand off.

Under the “Off timer” setting status, set the key free for 5 second, it will exit the “Off timer” setting

status, the “ ” key on, heard the sound of shortly sparks, system starts to measure the time

according to the time you set.

Timer

3、Close down:

3、1．Press “Left-on/off” to turn off the left hob.

Then press the “ ” or no-operation for 15 second in order into lock on status（ as ）,

the indicator light on and heard the sound of short sparks.

3、2. Off timer:

You can use the off timer for the hob; time range from 00~99 minutes is available.

3、2.1. Hand operation for the timer off:

Press “ ” key when the hob is on, you can set the power off time for the hob by the

screen displays (“ ” shows the current remaining time, the default option

is “ ”) as Fig. 10. Then press “ ” to adjust the time.

Timer

ON/L

Lock/L

Timer

Press “+” key, the order as follows:

Power

ON/L ON/R

Lock/L

Lock/R

High

Power Low

Timer

High

Power Low

Fig. 10

To press the “+ -” key to adjust the time under the off timer setting status. The value change order as

follows:

00→02→04→06→08→10→15→20→25→30→35→40→45→50→60→70→80→90→99

Press “-”key, the order as follows:

Rubine RGH-LATINO2B-BL User manual

Rubine RGH-LATINO2B-BL User manual

Rubine RGH-LATINO2B-BL User manual

Related papers

Other documents