Citizen AT0361-81L User manual

AT0361-81L
Citizen
Brand
Citizen
Model
AT0361-81L
Category
Watches
Type
User manual

This manual is also suitable for

Citizen AT0361-81L is a light-powered watch with a chronograph function capable of measuring up to 60 minutes by 1 second. It features a date indication that requires adjustment on the first of March, May, July, October, and December. The watch also has a 24-hour hand and allows for precise time setting by moving the hands 4 or 5 minutes forward and then back to the correct time. Additionally, the chronograph second hand can be adjusted to the 0-second position when needed.

Citizen AT0361-81L is a light-powered watch with a chronograph function capable of measuring up to 60 minutes by 1 second. It features a date indication that requires adjustment on the first of March, May, July, October, and December. The watch also has a 24-hour hand and allows for precise time setting by moving the hands 4 or 5 minutes forward and then back to the correct time. Additionally, the chronograph second hand can be adjusted to the 0-second position when needed.

H50x/H57x Abbreviated instruction
• This watch is light-powered. Be sure your watch is fully charged before use.
• For complete instructions for setting, use, charging time and specifications, refer to the full instruction manual:
H50x/
H57x instruction manual
Setting the time
1.
Pull the crown out to position
2
when the second hand
points to 12:00 (0 second).
2.
Rotate the crown to set the time.
• Referring to the 24-hour hand, set the time to ensure proper AM or
PM time is set.
• Move the hands 4 or 5 minutes forward of desired minutes and move
them back to the right time to set the time more precisely.
3.
Push the crown in to position
0
in accordance with a
reliable time source.
The second hand starts moving.
H57x
Minute hand
Minute hand
24-hour hand
24-hour hand
Date indication
Date indication
Button
Ⓐ
Button
Ⓐ
Chronograph
second hand
Chronograph
second hand
Chronograph
minute hand
Chronograph
minute hand
Second hand
Second hand
Hour hand
Hour hand
Button
Ⓑ
Button
Ⓑ
Crown
Crown
• Illustrations for reference only. Actual appearance of
your watch may differ from the illustrations above.
• Illustrations for reference only. Actual appearance of
your watch may differ from the illustrations above.
Setting the date indication
• Do not adjust the date indication when the watch shows 9:00 PM - 1:00
AM. Otherwise the date indication may change incorrectly.
• Date indication adjustment is required on the first of the following months:
March, May, July, October and December.
1.
Pull the crown out to position
1
.
2.
Rotate the crown clockwise to adjust the date indication.
• Counterclockwise rotation moves nothing.
3.
Push the crown in to position
0
.
Using the chronograph
Movement Caliber H50x can measure up to 60 minutes by 1 second.
Movement Caliber H57x up to 30 minutes by 1 second.
• The hour, minute and 24-hour hands move normally during chronograph
measurement.
1.
Push the crown in to position
0
.
Start/stop:
press and release the upper right button
Ⓑ
.
• Press and release lower right button
Ⓐ
to return the chronograph
minute hand to 00 minute position before starting measurement if it is
not at the position.
Reset:
press and release lower right button
Ⓐ
while the chronograph is
stopped.
• Applying strong shock to the watch during chronograph measurement
may move the chronograph minute hand to an incorrect position. In
such a case, press button
Ⓐ
securely to return the chronograph minute
hand to 00 minute position.
Adjusting the chronograph second hand to the 0 second position
Execute the operation below when the chronograph second hand does not
return to 0 second position after resetting or the hand points to an incorrect
position because of strong shock or other reasons.
• You cannot execute this operation when the insufficient charge warning
function is activated. You must fully charge your watch.
1.
Pull the crown out to position
2
.
2.
Press and hold the upper right button
Ⓑ
for 3 or more seconds.
• Press and release the upper right button
Ⓑ
to adjust the chronograph
second hand to 0 second position (12:00 position).
Each time you press the button, the hand moves by 1 second.
Press and hold the button to move the hand continuously.
3.
Push the crown in to position
0
.
• Press and release the lower right button
Ⓐ
to confirm the chronograph
minute hand returns to 00 minute position.
Crown
’
s position
0 1 2
Crown
’
s position
0 1 2
Component identification
H50x
CITIZEN WATCH CO., LTD.
ENGLISH
  • Page 1 1

Citizen AT0361-81L User manual

AT0361-81L
Citizen
Brand
Citizen
Model
AT0361-81L
Category
Watches
Type
User manual
This manual is also suitable for

Citizen AT0361-81L is a light-powered watch with a chronograph function capable of measuring up to 60 minutes by 1 second. It features a date indication that requires adjustment on the first of March, May, July, October, and December. The watch also has a 24-hour hand and allows for precise time setting by moving the hands 4 or 5 minutes forward and then back to the correct time. Additionally, the chronograph second hand can be adjusted to the 0-second position when needed.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents