2. Cocoon
  3. HE170543

Cocoon HE170543 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Cocoon HE170543 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Getting Started Guide
HE170543
PLU: 58512
08/2017
Version 1.1
.
FLEX MOUNT
REVERSING CAMERA
1. UNPACK
Unpack the reversing camera from the packaging and check you have
all the components:
• 1 x 5 inch Dash Monitor
• 1 x Wireless IP Rated Camera
• 1 x License Plate Adaptor
Mount with Cable
• 1 x Suction Mount for Monitor
• 1 x 12V/24V Power Adaptor for
Monitor or Camera
• 1 x Monitor Hardwire Cable
(Not Shown)
• 1 x Installation Kit (Not Shown)
• 1 x Spare Fuse (Not Shown)
• 1 x Instruction Manual (Not
Shown)
• 1 x Warranty Card (Not Shown)
• 1 x Getting Started Guide (Not
Shown)
2. CHARGE
Using the included power adaptor, charge the wireless camera
3. ATTACH MONITOR
Attach the 5” Monitor to the suction mount and place on your dash/
windshield
4. MOUNT CAMERA
Once the camera is charged, place the camera in a suitable position on
the back of your car and power on the camera
5. PLUG IN MONITOR
Connect the power adaptor cable to the monitor to turn it on
6. REVERSE!
Warranty Note
If you experience any issues with this product, or it’s
performance is not what you had expected, please
contact us at Winplus before returning the item to
the store.
It is likely that we can resolve any problems for you
via phone or email.
We can be reached on:
Phone: 1300 663 907 (8:30am - 6:00pm EST)
Email: [email protected]
Web: www.winplus.com.au
.
/