2. RODE Microphones
  3. AI-1

RODE Microphones AI-1 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the RODE Microphones AI-1 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AI-1 Quickstart Guide
1
Connect AI-1 Interface
to computer
Connect microphone or instrument
2
*cable not included
Enable Phantom Power (P48)
This is required for condenser microphones
3
Enable P48
Press left knob to enable,
P48 light illuminates red
A
B
Disable P48 for dynamic
microphones
Press left knob to disable,
P48 light darkens
OFF
Set input level
4
Green is good
A
Turn down when Red
B
Connect headphones, adjust volume
5
*headphones not included
Enable Direct Monitor by pressing right knob
6
ON - Signal goes from
mic direct to headphone
output
A
If desired, connect powered speakers
7
*disconnect headphones to activate speaker output
You’re now
ready to create!
Love your new product?
Share with us #rodeai1
Scan the
QR code
to find
out more
@
rodemic
@
rodemics
rodemic
www.rode.com
OFF - Signal goes from
mic through computer to
headphones
B
/