2. Acer
  3. K10
K10

Acer K10 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Acer K10 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I connect the projector to my computer?
    How do I connect the projector to a power source?
    How do I turn on the projector?
    How do I adjust the position and focus of the projected image?
    How do I turn off the projector?
INSTALLATION
INTERFACE CONNECTOR
Note: Connector interface is subject to model’s specifications
Video Output
Y
Y
1
DVD player, Set-top Box
HDTV receiver
RBG
RBG
HDTV adapter
2
D-Sub
D-Sub
3
VGA, DVI
HrvatskiEnglish
Quick Start
X INSTALLATION
1. Composite video cable
2. VGA to component/HDTV adapter
3. VGA cable
Note: Connector interface is subject to model's specifications
Y INTERFACE CONNECTOR
Connecting to a Computer
1. Ensure the projector and your computer
are turned off.
2. Connect one end of the VGA cable to the
“VGA IN” connector on the projector;
connect the other end to the VGA
connector on the computer and tighten
the screws.
3. Connect one end of the AC adapter into
one end of the power cord.
4. Connect the other end of the AC adapter
into the DC IN connector on the
projector; connect the other end of the
power cord to an electrical outlet.
Powering On the Projector
1. Turn on the projector first and then the
computer.
2. Adjust the position and focus.
3. Run your presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut down.
Brzi početak
X UGRADNJA
1. Kabel za kompozitni video signal
2. Prilagodnik VGA do dijela/HDTV
3. VGA kabel
Napomena: Priključak sučelja ovisi o specifikacijama modela
Y PRIKLJUČAK SUČELJA
Spajanje na računalo
1. Provjerite da su i projektor i računalo
isključeni.
2. Spojite jedan kraj VGA kabela na priključak
“VGA IN” na projektoru; spojite drugi kraj
VGA priključka na računalo i pritegnite
vijke.
3. Spojite jedan kraj AC prilagodnika s jednim
krajem kabela za napajanje.
4. Spojite drugi kraj AC prilagodnika sa DC IN
priključkom na projektoru, uključite drugi
kraj kabela za napajanje u električnu
utičnicu.
Uključivanje projektora
1. Najprije uključite projektor a zatim
računalo.
2. Podesite položaj i fokusirajte.
3. Pokrenite vašu prezentaciju.
Isključivanje projektora
1. Pritisnite tipku za napajanje dva puta.
2. Ne isključujte kabel za napajanje iz utičnice
dok se ventilator projektora ne isključi.
/