3
5
2
1
4
6
7
In the standby mode, press CLOCK SET to enter the clock setting mode.
Press
J
/
K
repeatedly to select 12 hour or 24 hour format.
Press CLOCK SET to confi rm.
The hour digits are displayed and begin to blink.
«
Press
J
/
K
to set the hour.
Press CLOCK SET to confi rm.
The minute digits are displayed and begin to blink.
«
Press
J
/
K
to set the minute.
Press CLOCK SET to confi rm the clock setting.
AC power adaptor
Tip
See the User Manual on how to
connect other equipment to this
system.
Set clock
1
1
2
2
Connect one end of the AC adaptor to the DC IN
socket on the bottom of the main unit.
Connect the other end of the AC adaptor to the wall
outlet.
MCM330_12_QSG_Eng.indd 2MCM330_12_QSG_Eng.indd 2 3/20/2009 5:49:11 PM3/20/2009 5:49:11 PM