1. PresstheTIMER/EQbuttontoselectthe following EQ settings :thefollowingEQ settings :EQsettings:
-FLAT->ROCK->JAZZ->CLASSIC->POP->FLAT.
will be shown on the display.will be shown on the display.
1. Insert USB / SD / MMC into the USB / SD / MMC input slots of the system.
2. Press the “FUNCTION” button to select USB / SD / MMC mode.
3. The unit will start to read the media and playback will start automatically.
note: The USB connector does not support connection with a USB extension cable and
itisnotdesignedforcommunicationwithacomputerdirectly.
The manufacturer is not responsible for the playability of a USB / SD / MMC disk or MP3 player
duetorecordingconditions,capacity,interfacecompatibility,etc.
Due to different formats, some USB / SD / MMCdisksorMP3playersmaytakelongertimetoberead.
USB / SD / MMC OPERATION
FUNCTION
PRESET EQ
TIMER / EQ
Muteon/offischangedcyclicallybypushingtheMUTEbutton.
The“mute”markisonduringmute.
Mutewillbecancelledwhenyoucarryoutthefollowingoperations.
a. PresstheMUTEbuttonagain.
b. The Volume is adjusted by the VOL +/- button.
MUTE ON/OFF
MUTE
FOR NORMAL COMPACT DISC PLAYBACK
Programmedplaybackenablestracksonadisctobeplayedinadesiredorder.Upto20trackscanbeprogrammed.
1. ProgrammodeworksinSTOPmodeonly.
2. Holdthe“PROGRAM/MEMORY/CLK-ADJ.”buttonfor2secondstoenterprogrammode.
The“PROG”iconwillbeturnedon.“000P01”willbeshownwith“000”ashing.“000”
representsthetracknumberand“P01”representstheprogramlocationnumber.
3. PresstheF-SKIPorB-SKIPbuttontoselecttherequiredtracknumber.
4. Pressthe“PROGRAM/MEMORY/CLK-ADJ.”buttontoconrmthetracknumber.Thedisplaywill
showthenextprogramnumber“000P02”.Thetracknumberwillbeashingagain,enterthedesiredtracknumber.
5. Repeatsteps3and4untilallthedesiredtrackshasbeenprogrammedoralltheprogrammemorieshavebeenused.
ItwillloopbacktoP01afteralltheprogrammemorieshave
beenused.Thesametracknumbercanbeprogrammedmorethanonce.
6. Press the PLAY / PAUSE button to start playback.
7. PresstheSTOPbuttontoclearalltheprogrammedtracks.
GB 5
FOR MP3/WMA/USB/SD PLAYBACK
Programmedplaybackenablestracksonadisctobeplayedinadesiredorder.Upto20trackscanbeprogrammed.
1. ProgrammodeworksinSTOPmodeonly.
2. HoldthePROGRAM/MEMORY/CLK-ADJ.buttonfor2secondstoenterprogrammode.The“PROG”iconwill
beturnedon.“00000P01”willbeshownwith“00”ashing.“000”representsthetracknumberand
“P:01”representstheprogramlocationnumber.
3. Press the F - SKIP or B - SKIP button to select the desired folder.
4. Press the PROGRAM / MEMORY / CLK - ADJ. button to enter selected folder number.
5. PresstheF-SKIPorB-SKIPbuttontoselecttherequiredtracknumber.
6. PressthePROGRAM/MEMORY/CLK-ADJ.buttontoconrmthetracknumber.
Thedisplaywillshowthenextprogramnumber“000P02”.Thetracknumberwillbe
ashingagain,enterthedesiredtracknumber.
7. Repeatsteps3and4untilallthedesiredtrackshavebeenprogrammedorallthe
programmemorieshavebeenused.ItwillloopbacktoP01afteralltheprogram
memorieshavebeenused.Thesametracknumbercanbeprogrammedmore
than once.
8. Press the PLAY / PAUSE button to start playback.
9. PresstheSTOPbuttontoclearalltheprogrammedtracks.
MP3/WMA/USB display
PROGRAMMED CD / USB / SD / MMC OPERATION
CD display
PROGRAM /
MEMORY /
CLK-ADJ.
PROGRAM /
MEMORY /
CLK-ADJ.