695159 Instruction Manual

Function Description ( Receiver )

} Automatic and manual receive the radio signal (DCF)

} Max/Min display for indoor / outdoor temperature and humidity

} Time Zone select:-12~+12 Hour differences

} Dual time zone selection

} Continuous calendar up to year 2099

} Air press trend indication display

} 12HR air pressure history

} 12/24 hour format selectable

} Alarm and Snooze

} Backlight for 5 seconds

} 5 weather icons: sunny/party sunny/cloudy/rainy/storm rain

} 3 comfort icons display ( DRY / COMFORT / WET )

} Weekday display in 7 languages ( English-German-French-Italian-Dutch-Spanish-Danish )

} Outdoor temperature measuring range -50~+70℃

} Indoor temperature measuring range 0~+50℃

} 3 channels by option

} Range of transmitter is up to 30m

} Battery : DC 1.5V AAA size X 2 PCS

Receiver Unit Appearance:

Front View

Part A-LCD

A13 Moon of phase A14: Barometric air pressure

A15: comfort icons A16: Air pressure trend indication

A17: Weather forecast icon

Part B-Buttons

B1: “ DOWN –WAVE ” button B2: “- ( UP / MEM )” button

B3: “ CHANNEL “ button B4: “ SNOOZE / LIGHT ” button

B5: “ALM-SET” button B6: “ SET ” button

B7: “ RESET ” button

Top View

Part D-LCD

D1: Outdoor temperature / humidity display D2: RF icon

D3: Low battery display D4: Channel

Part E- Buttons

E3: “℃/℉” button

Part F-Structure

Manual Time Setting :

The setting sequence is shown as follow: Year-Month-Date- Time Zone - 24 HR -Hour-Minute-Weekday Languages

} In time mode, press and hold down the ” SET(B6) ” button for 3 seconds, the year display 2011 starts to flash,

now use ”+(B1) or ”-(B2)” buttons to set the correct year.

} Press “B6” to confirm your setting, the hour display starts to flash. Now use “+(B2)” or “–(B1)“ buttons to set

correct hour.

} Press “B6” to confirm your setting, the minute display starts to flash. Now use “+(B2)” or “–(B1)“ buttons to set

correct minute.

} Press “B6” to confirm your setting ,the language selection for the weekday displays states to flash, Now use

} Press “B6” to confirm your setting and to end the setting procedures.

} After 10 seconds without pressing any button the receiver switches automatically from setting mode to Normal

Back View Back View Front View

clock mode.

Setting The Daily Alarms :

and the “ ”icon disappears .

To Use Snooze Alarm:

} Press” SNOOZE/LIGHT(B4) ” button once to stop the alarm temporarily, the “ ” icon keeps flashing ,the alarm

} To stop the alarm , press anything button once ,the alarm beep will stop and the “ ” icon become static ,alarm will

Reception Of The Radio Signal :

} When you insert the batteries, all the icons on the LCD display will briefly up for 3 seconds, and you will hear a

beep tone.

about 3 minutes and is displayed by flashing reception RF symbol “ “ on the LCD display .

} After receiver has created a connection to the wireless remote sensor ( after 3 minutes ), it will then begin the

automatic reception of the DCF radio signal , this operation takes up to 7 minutes and is display by flashing radio

} If reception is successful, then the radio controlled icon ” “ will appear continuously on the LCD display.

signal at 3:00 a.m. it will stop receiving until 1:00 a.m. next day .but if it fail reception at 3:00 a.m,it will repeat again

Remarks :

} A flashing radio mast symbol indicates that the DCF signal reception has started.

} A continuously displayed radio mast symbol indicates that the DCF was received successfully.

} We recommend a minimum distance of 2.5 meters (8.2 Feet) to all sources of interference such as televisions or

computer monitors.

} Radio reception is weaker in rooms with concrete walls (e.g. in cellars) and in offices. In extreme cases, place the

system at a window.

} As there is less atmospheric interference at night, radio reception is normally possible at this time. A single

synchronization each day is sufficient to keep the time display accurate to one second.

Manual Receive Signal :

To start DCF reception manually, press ” WAVE (B1) ” button for 2 seconds, The radio controlled icon “ ” starts to

℃/℉ Temperature Display

individual mode.

Moon Phase and Tide Indication

Phases (Moon phase icon：Waning crescent; New moon; Waxing crescent; Waxing gibbous; First quarter; Waning

gibbous; Full moon; Last quarter) ranging from New Moon to full Moon. Moonphase display is controlled by the

current calendar.

WET / COMFORT / DRY Icons

Weather Forecaster Icon And Pressure Trend Indicator

Air Pressure Tendency Indicators

Air Pressure History Bar Chart

} The “oh” represent the current full hour air pressure recording

} The columns represent the “hPa” at specific time

} If the bars are raising it means that the weather is getting better due to the increase of air pressure

present time “0h”

Remarks :

} Moving your weather from one floor of a building to another floor will affect the accuracy of your Receiver, which

should operate at the same altitude all the time , if you move it to a new location , it will take 12-24 hour to get

} As you go higher in the air , the atmospheric pressure decreases, the exact pressure at a particular altitude

outside.

TO Read Maximum-Minimum Indoor /Outdoor Temperature And Humidity:

} Press the ” UP/MEM (B2) ” button to show the maximum indoor /outdoor temperature and humidity with “MAX”

icons appearing on the display.

} Press the “ UP/MEM (B2)”button again to show the maximum indoor / outdoor temperature and humidity with

} In “MAX/MIN” mode ,hold ” UP/MEM ( B2) ” button for 3 seconds to clear the recorder max/min reading.

} Press ” DOWM (B1) ” button to select indoor/outdoor temperature in Celsius( ℃ )mode or Fahrenheit ( ℉ )

Display Outdoor Temperature :

Press “ CHANNEL(B5)” button to show the 3 channel temperature, the sequence is shown as follow:

} Hold “CHANNEL(B3)” button for 3 seconds to cancel unused channel manually, it will automatically search

Wireless Remote Sensor Registration Procedure :

} The wireless remote sensor will automatically transmit temperature to the receive (clock ) after batteries

inserted .

} For having more than one external transmitter ,select the channel (CH1-CH2-CH3) to ensure each wireless

remote sensor is transmitting different channel before inserting batteries, the channel selecting switch (E2)

button is at the back of the wireless remoter sensor.

“CHANNEL”(B3)

“CHANNEL”(B3)