Sony DSC-T70 Owner's manual

GB

Digital Still Camera

Cyber-shot Handbook

DSC-T70/T75/T200

Before operating the unit, please read this

Handbook thoroughly together with the

“Instruction Manual” and the “Cyber-shot

Step-up Guide”, and retain them for future

reference.

VCLICK!

Table of contents

Basic Operations

Using functions for

shooting

Using functions for

viewing

Customizing the settings

Viewing images on a TV

Using your computer

Printing still images

Troubleshooting

Others

Index

2

Notes on using your camera

Notes on the types of “Memory Stick”

that can be used (not supplied)

“Memory Stick Duo”:

you can use a “Memory

Stick Duo” with your

camera.

“Memory Stick”:

you cannot use a

“Memory Stick”

with your camera.

Other memory cards cannot be used.

• For details on “Memory Stick Duo”, see

page 121.

When using a “Memory Stick Duo” with

“Memory Stick” compatible equipment

You can use the “Memory Stick Duo” by

inserting it into the Memory Stick Duo

Adaptor (not supplied).

Memory Stick Duo Adaptor

Notes on the battery pack

• Charge the battery pack (supplied) before using

the camera for the first time.

• The battery pack can be charged even if it is not

completely discharged. Also, even if the battery

pack is not fully charged, you can use the

partially charged capacity of the battery pack as

is.

• If you do not intend to use the battery pack for a

long time, use up the existing charge and

remove it from your camera, then store it in a

cool, dry place. This is to maintain the battery

pack functions.

• For details on the usable battery pack, see

page 123.

Carl Zeiss lens

This camera is equipped with a Carl Zeiss

lens which is capable of reproducing sharp

images with excellent contrast.

The lens for this camera has been produced

under a quality assurance system certified

by Carl Zeiss in accordance with the quality

standards of Carl Zeiss in Germany.

Notes on the LCD screen and lens

• The LCD screen is manufactured using

extremely high-precision technology so over

99.99% of the pixels are operational for

effective use. However, there may be some tiny

black points and/or bright points (white, red,

blue or green in color) that constantly appear on

the LCD screen. These points are normal in the

manufacturing process and do not affect the

recording in any way.

• If water droplets or other liquids splash on the

LCD screen and make it wet, immediately wipe

off the screen with a soft cloth. Leaving liquids

on the LCD screen surface can harm the quality

and cause a malfunction.

• Exposing the LCD screen or the lens to direct

sunlight for long periods may cause

malfunctions. Be careful when placing the

camera near a window or outdoors.

• Do not press against the LCD screen. The screen

may be discolored and that may cause a

malfunction.

• Images may trail across on the LCD screen in a

cold location. This is not a malfunction.

• Be careful not to bump the lens, and be careful

not to apply force to it.

Black, white, red, blue

or green points

3

Notes on using your camera

The pictures used in this Handbook

The photographs used as examples of pictures in

this Handbook are reproduced images, and are not

actual images shot using this camera.

On illustrations

Illustrations used in this Handbook are of

DSC-T200 unless noted otherwise.

4

Table of contents

Notes on using your camera..................................................................... 2

Basic techniques for better images........................................................... 8

Focus – Focusing on a subject successfully..................................................... 8

Exposure – Adjusting the light intensity........................................................... 10

Color – On the effects of lighting ..................................................................... 11

Quality – On “image quality” and “image size” ............................................... 12

Flash – On using the flash ............................................................................... 14

Identifying parts....................................................................................... 15

Indicators on the screen..........................................................................17

Operate the touch panel ......................................................................... 22

Changing the screen display................................................................... 23

Using the internal memory...................................................................... 25

Shooting images easily (Auto Adjustment mode) ...................................26

Setting Image size/Self-timer/Flash mode/Macro recording ........................... 28

Setting Focus/Metering Mode/ISO/EV ............................................................. 30

Viewing images....................................................................................... 35

Deleting images ...................................................................................... 37

Learning the various functions – HOME/Menu ....................................... 39

Menu items ............................................................................................. 42

Switching the shooting mode.................................................................. 43

Shooting images using Scene Selection................................................. 44

Shooting menu........................................................................................ 47

REC Mode: Selecting the continuous shooting method

EV: Adjusting the light intensity

Focus: Changing the focus method

Metering Mode: Selecting the metering mode

White Balance: Adjusting the color tones

Color Mode: Changing the vividness of the image or adding special effects

Flash Level: Adjusting the amount of flash light

Red Eye Reduction: Reducing the red-eye phenomenon

Face Detection: Detecting the face of subject

SteadyShot: Selecting the anti-blur mode

Setup: Selecting the shooting settings

Basic Operations

Using functions for shooting

5

Table of contents

Playing back images from the HOME screen .............................54

(Single Image): Playing back a single image

(Image Index): Playing back a list of images

(Slideshow): Playing back a series of images

Viewing menu......................................................................................57

(Retouch): Retouching still images

(Paint): Painting on still images

(Multi Resizing): Changing the image size according to usage

(Wide Zoom Display): Displaying still images in 16:9

(Slideshow): Playing back a series of images

(Delete): Deleting images

(Protect): Preventing accidental erasure

: Adding a Print order mark

(Print): Printing images using a printer

(Rotate): Rotating a still image

(Select Folder): Selecting the folder for viewing images

(Volume Settings): Adjusting the volume

Painting or putting stamps on still images (Paint)......................65

Customizing the Manage Memory feature and the Settings

........67

Manage Memory ..........................................................................68

Memory Tool — Memory Stick Tool..................................................68

Memory Tool — Internal Memory Tool .............................................70

Format

Settings ..........................................................................................71

Main Settings — Main Settings 1......................................................71

Main Settings — Main Settings 2......................................................73

Using functions for viewing

Customizing the settings

Format

Create REC.Folder

Change REC.Folder

Copy

Beep

Function Guide

Initialize

Calibration

Housing

USB Connect

COMPONENT

Video Out

TV TYPE

6

Table of contents

Shooting Settings — Shooting Settings 1......................................... 75

Shooting Settings — Shooting Settings 2......................................... 78

Clock Settings................................................................................... 79

Language Setting ............................................................................. 80

Viewing images on a TV ......................................................................... 81

Viewing images by connecting your camera to a TV with the supplied cable for

multi-use terminal ............................................................................................ 81

Viewing an image by connecting your camera to a HD TV............................. 83

Enjoying your Windows computer........................................................... 85

Installing the software (supplied) ............................................................ 87

On the “Picture Motion Browser” (supplied)............................................ 89

Copying images to your computer using the “Picture Motion Browser” .... 90

Copying images to a computer without “Picture Motion Browser” .......... 94

Viewing image files stored on a computer with the camera copying to the

“Memory Stick Duo” ................................................................................ 96

Using the “Music Transfer” (supplied)..................................................... 97

Using your Macintosh computer .............................................................98

Viewing “Cyber-shot Step-up Guide” .................................................... 100

How to print still images........................................................................ 101

Printing images directly using a PictBridge compliant printer ............... 102

Printing at a shop .................................................................................. 105

Viewing images on a TV

Using your computer

Printing still images

AF Illuminator

Grid Line

AF Mode

Digital Zoom

Auto Orientation

Auto Review

Smile Level

7

Table of contents

Troubleshooting.....................................................................................107

Warning indicators and messages ........................................................117

Using your camera abroad — Power sources.......................................120

On the “Memory Stick Duo”...................................................................121

On the battery pack...............................................................................123

On the battery charger ..........................................................................124

On Cyber-shot Station...........................................................................125

Index......................................................................................................127

Troubleshooting

Others

Index

8

Basic techniques for better images

When you press the shutter button halfway down, the camera adjusts the focus automatically

(Auto Focus). Remember to press the shutter button only halfway down.

To shoot a still image difficult to focus on

t [Focus] (page 31)

If the image looks blurred even after focusing, it may be because of camera shake.

t See

“Hints for preventing blur” (as follows).

Focus

Focusing on a subject successfully

Press the shutter

button fully down

suddenly.

Press the shutter

button halfway

down.

AE/AF lock indicator

flashing , lit/beeps

Then press the

shutter button

fully down.

Focus

Exposure

Color Quality

This section describes the basics so you can

enjoy your camera. It tells you how to use

various camera functions such as the HOME

screen (page 39), the menus (page 41), and so

on.

Flash

9

Basic techniques for better images

Hints for preventing blur

The camera moved accidentally when you took the picture. This is called “Camera shake.”

On the other hand, if the subject moved when you took the picture, it is called “subject

blur.”

Camera shake

Cause

Your hands or body shake while you hold the

camera and press the shutter button, and the entire

screen is blurred.

What you can do to reduce the blurring

• Use a tripod or place the camera on a flat, stable

surface to hold the camera steady.

• Shoot with a 2-second delay self-timer and

stabilize your camera by holding your shooting

arm firmly at your side after pressing the shutter

button.

Subject blur

Cause

Even though the camera is steady, the subject

moves during the exposure so the subject looks

blurred when the shutter button is pressed.

What you can do to reduce the blurring

• Select (High Sensitivity) mode in Scene

Selection.

• Select a higher ISO sensitivity to make the

shutter speed faster, and press the shutter button

before the subject moves.

Notes

• The anti-blur function is enabled in the factory default settings so that the camera shake is reduced

automatically. However, this is not effective for subject blur.

• Besides, camera shake and subject blur occur frequently under low-light or slow shutter speed

conditions, such as those encountered in (Twilight) or (Twilight Portrait) mode. In that case,

shoot with the above tips in mind.

10

Basic techniques for better images

You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is

the amount of light that the camera will receive when you release the shutter.

Exposure

Adjusting the light intensity

Overexposure

= too much light

Whitish image

The exposure is automatically set to the

proper value in the auto adjustment mode.

However, you can adjust it manually using

the functions below.

Adjusting EV:

Allows you to adjust the exposure

determined by the camera (pages 24, 34).

Metering Mode:

Allows you to change the part of the

subject to be measured to determine the

exposure (page 33).

Correct exposure

Underexposure

= too little light

Darker image

Shutter speed = Length of time the camera receives

light

Aperture = Size of the opening allowing light to pass

through

ISO sensitivity (Recommended Exposure

Index)

=

Recording sensitivity

Exposure:

11

Basic techniques for better images

Adjusting ISO Sensitivity (Recommended Exposure Index)

ISO sensitivity is a speed rating for recording media that incorporates an image sensor that

receives light. Even when the exposure is the same, images differ depending on the ISO

sensitivity.

To adjust the ISO sensitivity, see page 34.

The apparent color of the subject is affected by the lighting conditions.

Example: The color of an image affected by light sources

The color tones are adjusted automatically in the auto adjustment mode.

However, you can adjust color tones manually with [White Balance] (page 49).

High ISO sensitivity

Records a bright image even when shooting in a dark location, reducing

blur with a high shutter speed.

However, the image tends to become noisy.

Low ISO sensitivity

Records a smoother image.

However, when the exposure is insufficient, the image may become darker.

Color

On the effects of lighting

Weather/lighting

Daylight Cloudy Fluorescent Incandescent

Characteristics of

light

White (standard) Bluish Green-tinged Reddish

12

Basic techniques for better images

A digital image is made up of a collection of small dots called pixels.

If it contains a large number of pixels, the picture becomes large, it takes up more memory,

and the image is displayed in fine detail. “Image size” is shown by the number of pixels.

Although you cannot see the differences on the screen of the camera, the fine detail and data

processing time differ when the image is printed or displayed on a computer screen.

Description of the pixels and the image size

Selecting the image size for use (page 13)

Quality

On “image quality” and “image size”

1 Image size: 8M

3264 pixels × 2448 pixels = 7,990,272 pixels

2 Image size: VGA

640 pixels × 480 pixels = 307,200 pixels

Many pixels (Fine

image quality and

large file size)

Example: Printing in

up to A3 size

Few pixels (Rough

image quality but

small file size)

Example: An attached

image to be sent by

e-mail

Pixels

Pixel

13

Basic techniques for better images

The default settings are marked with .

*1 Images are recorded in 3:2 aspect ratio, same as photograph printing paper or postcards, etc.

*2 Both edges of the image may be cut off when printing (page 114).

• The larger the image size, the higher the image quality.

• The more frames per second you played back, the smoother playback can be.

Image size Guidelines No. of images Printing

8M

(3264×2448)

For prints up to A3(11×17") Less

More

Fine

Rough

3:2

*1

(3264×2176)

Shoot in 3:2 aspect ratio

5M

(2592×1944)

For prints up to A4(8.5×11")

3M

(2048×1536)

For prints up to 10×15 cm

(4×6") or 13×18 cm(5×7")

VGA

(640×480)

Shoot at small image size for

e-mail attachments

16:9

*2

(1920×1080)

Shoot in HDTV aspect ratio

Movie image size Frame/Second Usage guidelines

640(Fine)

(640×480)

Approx. 30 Shoot high quality movie for display on TV

640(Standard)

(640×480)

Approx. 17 Shoot standard quality movie for display on

TV

320 (320×240) Approx. 8 Shoot at small image size for e-mail

attachments

14

Basic techniques for better images

The eyes of the subject may come out red, or fuzzy white circular spots may appear when

using the flash. These phenomena can be reduced by taking the following steps.

The “Red-eye phenomenon”

This is caused by the reflection of flash light off the blood vessels of the retina of the subject’s

eyes because the pupils of the subject’s eyes are wide open in a dark place.

How can the “Red-eye phenomenon” be reduced?

• Set [Red Eye Reduction] to [On] (page 52).

• Select (High Sensitivity)* mode in Scene Selection (page 44). (The flash is turned off automatically.)

• When the eyes of the subject turn out red, correct the image with [Retouch] on the viewing menu

(page 57) or with the supplied software “Picture Motion Browser”.

The “White circular spots”

This is caused by particles (dust, pollen, etc.) in the air, which when they are close to the lens,

can be accentuated by the camera’s flash.

How can the “White circular spots” be reduced?

• Light the room and shoot the subject without a flash.

• Select (High Sensitivity)* mode in Scene Selection. (The flash is turned off automatically.)

* Even though you selected (High Sensitivity) mode in Scene Selection, the shutter speed might be

slower under low-light conditions, or in a dark place. In that case, use a tripod or hold your shooting arm

firmly at your side after pressing the shutter button.

Flash

On using the flash

Camera Eye

Retina

Camera

Subject

Particles (dust,

pollen, etc.) in

the air

15

Identifying parts

DSC-T200

See the pages in parentheses for details of

operation.

A Zoom (W/T) lever (28)

B Shutter button (27)

C Microphone

D (Playback) button (35)

E POWER button/POWER lamp

F Flash (29)

G Lens

H AF illuminator (75)/Self-timer lamp

(28)/Smile shutter lamp (46)

I Lens cover

A LCD screen/Touch panel (22, 23)

B Hook for wrist strap/Grip

C Speaker

D Battery insertion slot

E Multi connector

Used in the following situations:

• Making a USB connection between the

camera and the computer.

• Making a connection to audio/video input

jacks on a TV.

• Making a connection to a PictBridge

compliant printer.

F Access lamp

G “Memory Stick Duo” slot

H Battery eject lever

I Battery/“Memory Stick Duo” cover

J Tripod receptacle

• Use a tripod with a screw length of less than

5.5 mm (7/32 inch). You will be unable to

firmly secure the camera to tripods having

screws longer than 5.5 mm (7/32 inch), and

may damage the camera.

Bottom

16

Identifying parts

DSC-T70/T75

See the pages in parentheses for details of

operation.

A POWER button/POWER lamp

B Zoom (W/T) lever (28)

C Shutter button (27)

D (Playback) button (35)

E Flash (29)

F Microphone

G Lens

H AF illuminator (75)/Self-timer lamp

(28)/Smile shutter lamp (46)

I Lens cover

A Speaker

B LCD screen/Touch panel (22, 23)

C Hook for wrist strap/Grip

D Battery insertion slot

E Multi connector

Used in the following situations:

• Making a USB connection between the

camera and the computer.

• Making a connection to audio/video input

jacks on a TV.

• Making a connection to a PictBridge

compliant printer.

F Access lamp

G “Memory Stick Duo” slot

H Battery eject lever

I Battery/“Memory Stick Duo” cover

J Tripod receptacle

• Use a tripod with a screw length of less than

5.5 mm (7/32 inch). You will be unable to

firmly secure the camera to tripods having

screws longer than 5.5 mm (7/32 inch), and

may damage the camera.

Bottom

17

Indicators on the screen

Touch [DISP] on the screen to change to

the display selection screen (page 23).

See the pages in parentheses for details of

operation.

When shooting still images

When shooting movies

Screen operation

You can change the settings by touching the

following: 1, 2, 3.

• Touching an icon displays the guide about

the touched item. To hide this guide,

touch [?] (page 22).

A

B

Display Indication

HOME Displays the HOME screen.

Image size settings (13)

Self-timer settings (28)

Shooting mode settings

(43)

Shooting mode (Scene

Selection) settings (44)

• Touch in the shooting

mode settings to select the

Scene Selection mode.

MENU Displays the MENU screen.

Display Indication

BACK Backs to the previous

screen.

This cancels the focusing

on the subject selected by

the touch operation.

Flash mode settings (29)

Macro/Close focus settings

(30)

DISP Changes the screen display.

18

Indicators on the screen

C

Screen indicators

Screen indicators 4 to 7 show the

current setting status.

D

E

Display Indication

0.5m 1.0m

3.0m 7.0m

AF mode/focus preset

settings (31, 32)

• [0.5m] is available in the

DSC-T70/T75 only.

Metering mode settings

(33)

ISO number settings (34)

0EV Exposure Value settings

(34)

Display Indication

Battery remaining

[]5 Smile shutter (number of

still images)

Zoom scaling (28, 76)

Flash charging

C:32:00 Self-diagnosis display

(117)

Display Indication

SteadyShot (53)

• Displayed when the shutter

button is pressed halfway

down in the default settings.

Recording Media

(“Memory Stick Duo,”

internal memory)

Recording folder (68)

• This does not appear when

using internal memory.

AF illuminator (75)

Vibration warning

• Indicates vibration may

prevent you from shooting

clear images due to

insufficient lighting. Even if

the vibration warning

appears, you can still shoot

images. However, we

recommend that you turn on

the anti-blur function, using

the flash for better lighting

or using a tripod or other

means to stabilize the

camera (page 9).

Self-timer (28)

96 Number of recordable

images

00:00:00 Recordable time (h:m:s)

Red-eye reduction (52)

Flash level (51)

Recording mode (47)

Face Detection (52)

Touch AF indicator (26)

Housing (72)

White balance (49)

Color mode (50)

Display Indication

19

Indicators on the screen

F

G

Display Indication

AF range finder frame (31)

Low battery warning (117)

Histogram (24)

Display Indication

z AE/AF lock (27)

NR slow shutter

• When the shutter speed

drops below a certain speed

in low light conditions, the

NR (Noise Reduction) slow

shutter function is activated

automatically to reduce the

picture noise.

125 Shutter speed

F3.5 Aperture value

ISO400 ISO number (34)

+2.0EV Exposure Value (34)

Macro/Close focus (30)

• When [Display Setup] is set

to [Image Only], the current

settings are displayed.

Flash mode (29)

• When [Display Setup] is set

to [Image Only], the current

settings are displayed.

Standby

REC

Standby a movie/Recording

a movie

0:12 Recording time (m:s)

20

Indicators on the screen

When playing back still images

When playing back movies

Screen operation

You can change the settings by touching the

following: 1, 2.

A

B

Screen indicators

Screen indicators 3 to 5 show the

current setting status.

C

Display Indication

HOME Displays the HOME screen.

Changes to index mode.

Plays back the slide show.

Deletes the image.

MENU Displays the MENU screen.

Selects the playback folder.

Returns to the single image

screen from the index

screen.

Display Indication

BACK Backs to the previous

screen.

Adjusts the volume (35).

x Stop

N Playback

/ Playback zoom (36)

Turns v/V/b/B on/off.

Displays the previous/next

image.

m M Fast forward/Rewind

DISP Changes the screen display.

Display Indication

Battery remaining

Image size (13)

Check mark

Print order (DPOF) mark

(105)

Protect (61)

Playback zoom (36)

C:32:00 Self-diagnosis display

(117)

Page is loading ...

Sony DSC-T70 Owner's manual

This manual is also suitable for

Sony DSC-T70 Owner's manual

Related papers

Other documents