Sony KLV-46Z450A Operating instructions
- Category
- CRT TVs
- Type
- Operating instructions
This manual is also suitable for
© 2008 Sony Corporation 4-127-165-11(2)
KLV-52/46/40Z450A
4-127-165-11(2)
KLV-52Z450A
KLV-46Z450A
KLV-40Z450A
Operating Instructions
LCD Colour TV
010COV.book Page 1 Monday, November 3, 2008 9:49 AM
2
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Thank you for choosing this Sony product.
Before operating the TV, please read this manual
thoroughly and retain it for future reference.
The illustrations used in this manual are of the
KLV-46Z450A unless otherwise stated.
• HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
• “BRAVIA” and are trademarks of Sony
Corporation.
Introduction Trademark information
010COV.book Page 2 Monday, November 3, 2008 9:49 AM
3
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Table of Contents
Checking the accessories ...........................4
Inserting batteries into the remote...............4
1: Attaching the stand .................................4
2: Connecting an antenna/cable/VCR.........5
3: Preventing the TV from toppling over......5
4: Bundling the cables.................................5
5: Performing the initial set-up ....................6
Selecting the language............................. 6
Auto-tuning the TV .................................... 6
Watching TV ..............................................7
Adjusting the viewing angle of the TV .........7
Adjust the angle left and right (swivel) ..... 7
Detaching the Table-Top Stand from
the TV..........................................................7
Safety information .......................................8
Precautions .................................................9
Overview of the remote ..........................10
Using the Tools menu ............................. 13
Overview of the TV buttons and
indicators .................................................14
15
Using Optional Equipment
Connecting optional equipment.................15
Viewing pictures from the connected
equipment .................................................16
Viewing Twin Picture.................................18
Viewing PIP (Picture in Picture) ................18
Using BRAVIA Sync (Control for HDMI) ...19
To connect the equipment that is
compatible with control for HDMI ........... 19
To make the control for HDMI settings ... 19
Control for HDMI ..................................... 19
Operating Optional Equipment using the TV
Remote......................................................20
Buttons for using optional equipment..... 20
Programming the remote ........................ 20
22
Using MENU Functions
Navigating through menus........................ 22
Using the Favourite List............................ 23
Settings adjustment .................................. 24
Picture menu ...........................................26
Sound menu ............................................27
Screen menu ...........................................28
Video Settings menu ...............................29
Set-up menu............................................ 30
PC Settings menu....................................33
Channel Set-up menu .............................34
36
Additional Information
Installing the Accessories (Wall-Mount
Bracket, TV Stand) ................................... 36
TV installation dimensions table.............. 37
Screw and Hook locations diagram/
table ........................................................ 38
Specifications ........................................... 39
Troubleshooting ........................................ 40
Start-up Guide 4
010COV.book Page 3 Monday, November 3, 2008 9:49 AM
4
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Start-up Guide
Checking the
accessories
AC power cord
Stand (1) and screws (4) (For KLV-46Z450A/
KLV-40Z450A)
Remote RM-GA012 (1)
Size AA batteries (R6 type) (2)
Inserting batteries into
the remote
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
1: Attaching the stand
B For KLV-46Z450A/KLV-40Z450A
1 Place the TV onto the stand by aligning the
screw hole alignment lines over the stand
as shown.
2 Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
• This TV is very heavy, so two or more people
should place the TV onto the stand.
• If using an electric screwdriver, set the tightening
torque at approximately 1.5N·m (15kgf·cm).
Push and lift the cover to open.
010COV.book Page 4 Monday, November 3, 2008 9:49 AM
5
GB
Start-up Guide
KLV-52/46/40Z450A
4-127-165-11(2)
2: Connecting an
antenna/cable/VCR
Connecting an antenna/cable
3: Preventing the TV
from toppling over
1 Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2 Install a machine screw (M6 x 12, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine screw
with a strong cord.
4: Bundling the cables
• Do not bundle the AC power cord together with
other cables.
8
8
8
8
Connecting an antenna/cable and VCR
Antenna cable
(not supplied)
S video
cable
(not
supplied)
Antenna cable
(not supplied)
Antenna cable
(not supplied)
Audio/Video
cable (not
supplied)
VCR
2
3 4
1
010COV.book Page 5 Monday, November 3, 2008 9:49 AM
6
GB
KLV-52/46/40Z450A
4-127-165-11(2)
5: Performing the initial
set-up
1 Connect the TV to your AC power outlet
(110-240 V AC, 50/60 Hz).
2 Press 1 on the top edge of the TV.
When the TV is in standby mode (the 1 (standby)
indicator on the TV front panel is red), press TV
"/1 on the remote to turn on the TV.
When you turn on the TV for the first time, the
“Language” menu appears on the screen.
3
Press
F
/
f
to select the language displayed
on the menu screens, then press .
4 Press F/f to select the country/region,
then press .
5 Press F/f to select “Home”, then press .
6 Press G/g to select “OK”, then press .
The TV starts searching for all available channels.
This may take some time, please be patient and do
not press any buttons on the TV or remote.
If a message appears for you to confirm the
antenna connection
No programmes found. Please connect antenna
(aerial) and select “Confirm” to start auto-tuning
again. If 100 channels are found, auto-tuning is
stopped.
Selecting the language
,
1
3, 4, 5, 6, 9,
10, 11
8
Auto-tuning the TV
Select location.
010COV.book Page 6 Monday, November 3, 2008 9:49 AM
7
GB
Start-up Guide
KLV-52/46/40Z450A
4-127-165-11(2)
7 When the “Programme Sorting” menu
appears on the screen, follow the steps of
“Programme Sorting” (page 34).
If you do not want to change the order in which the
channels are stored on the TV, go to step 8.
8 Press MENU to exit.
The TV has now tuned in all the available
channels.
9 Select day and time.
10 Select “Yes” to link the operations of the
TV and the connected equipment that is
compatible with control for HDMI
automatically.
11 Press G/g to select the desired setting in
“Display this menu next time?” dialogue,
then press
to exit.
z •If “Yes” is selected and the TV is turned off
by pressing 1 on the TV, or is disconnected
from the AC power outlet, the initial set-up
procedure restarts the next time the TV is
turned on.
Watching TV
1 Press 1 on the top edge of the TV to turn
on the TV.
2 Press the number buttons or PROG +/– to
select a TV channel.
3 Press 2 +/– to adjust the volume.
Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles shown
below.
Detaching the Table-
Top Stand from the TV
Remove the screws guided by the arrow marks of
the TV.
Do not remove the Table-Top Stand for any reason
other than to wall-mount the TV.
• For bracket installation, refer to the instruction
guide provided by the Wall-Mount Bracket model
for your TV. Sufficient expertise is required in
installing this TV, especially to determine the
strength of the wall for withstanding the TV’s
weight. For product protection and safety
reasons, Sony strongly recommends that you
use the Wall-Mount Bracket model designed
for your TV and the wall-mounting of your TV
should be performed by Sony dealers or
licensed contractors.
Adjust the angle left and right (swivel)
Top view
Front
010COV.book Page 7 Monday, November 3, 2008 9:49 AM
8
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Safety information
Installation/Set-up
Install and use the TV set in accordance with the
instructions below in order to avoid any risk of fire,
electrical shock or damage and/or injuries.
Installation
• The TV set should be installed near an easily accessible
AC power outlet.
• Place the TV set on a stable, level surface to avoid it from
falling down and cause personal injury or damage to the
TV.
• Only qualified service personnel should carry out wall
installations.
• For safety reasons, it is strongly recommended that you
use Sony accessories, including:
– Wall-mount bracket SU-WL500
– Wall-mount bracket SU-WL50B
• Be sure to use the screws supplied with the Wall-mount
bracket when attaching the mounting hooks to the TV set.
The supplied screws are designed so that they are 8 mm to
12 mm in length when measured from the attaching
surface of the mounting hook.
The diameter and length of the screws differ depending on
the Wall-mount bracket model.
Use of screws other than those supplied may result in
internal damage to the TV set or cause it to fall, etc.
Transporting
• Before transporting the TV set,
disconnect all cables.
• Two or more people are needed to
transport a large TV set.
• When transporting the TV set by
hand, hold it as shown on the right.
Do not put stress on the LCD panel.
• When lifting or moving the TV set,
hold it firmly from the bottom.
• When transporting the TV set, do
not subject it to jolts or excessive
vibration.
• When transporting the TV set for
repairs or when moving, pack it
using the original carton and
packing material.
Ventilation
• Never cover the ventilation holes or
insert anything in the cabinet.
• Leave space around the TV set as
shown below.
• It is strongly recommended that you
use a Sony wall-mount bracket in
order to provide adequate air-
circulation.
Installed on the wall
Installed with stand
• To ensure proper ventilation and prevent the collection of
dirt or dust:
– Do not lay the TV set flat, install upside down,
backwards, or sideways.
– Do not place the TV set on a shelf, rug, bed or in a closet.
– Do not cover the TV set with a cloth, such as curtains,
or items such as newspapers, etc.
– Do not install the TV set as shown below.
AC power cord
Handle the AC power cord and outlet as follows in
order to avoid any risk of fire, electrical shock or
damage and/or injuries:
– Use only Sony supplied AC power cords, not those of
other brands.
– Insert the plug fully into the AC power outlet.
– Operate the TV set on a 110-240 V AC supply only.
– When wiring cables, be sure to unplug the AC power
cord for your safety and take care not to catch your feet
on the cables.
– Disconnect the AC power cord from the AC power
outlet before working on or moving the TV set.
– Keep the AC power cord away from heat sources.
– Unplug the AC power plug and clean it regularly. If the
plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Notes
• Do not use the supplied AC power cord on any other
equipment.
• Do not pinch, bend, or twist the AC power cord
excessively. The core conductors may be exposed or
broken.
Screw (supplied with the Wall-mount
bracket)
Mounting Hook
Hook attachment on rear of TV set
8mm - 12mm
Be sure to hold
the bottom of the
panel, and not the
transparent part,
speaker, or
speaker grille
area. Do not
compress the
panel’s speaker
grille area.
30 cm
10 cm 10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm 10 cm 6 cm
Leave at least this space around the set.
Air circulation
is blocked.
Air circulation is blocked.
Wall
Wall
010COV.book Page 8 Monday, November 3, 2008 9:49 AM
9
GB
KLV-52/46/40Z450A
4-127-165-11(2)
• Do not modify the AC power cord.
• Do not put anything heavy on the AC power cord.
• Do not pull on the AC power cord itself when
disconnecting the AC power cord.
• Do not connect too many appliances to the same AC
power outlet.
• Do not use a poor fitting AC power outlet.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those listed below,
or the TV set may malfunction and cause a fire,
electrical shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the seashore, on a ship or
other vessel, inside a vehicle, in medical institutions,
unstable locations, near water, rain, moisture or smoke.
Environment:
Places that are hot, humid, or excessively dusty; where
insects may enter; where it might be exposed to mechanical
vibration, near flammable objects (candles, etc). The TV set
shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the TV.
Situation:
Do not use when your hands are wet, with the cabinet
removed, or with attachments not recommended by the
manufacturer. Disconnect the TV set from AC power outlet
and antenna during lightning storms.
Broken pieces:
• Do not throw anything at the TV set. The screen glass may
break by the impact and cause serious injury.
• If the surface of the TV set cracks, do not touch it until you
have unplugged the AC power cord. Otherwise electric
shock may result.
When not in use
• If you will not be using the TV set for several days, the TV
set should be disconnected from the AC power for
environmental and safety reasons.
• As the TV set is not disconnected from the AC power
when the TV set is just turned off, pull the plug from the
AC power outlet to disconnect the TV set completely.
• However, some TV sets may have features that require the
TV set to be left in standby to work correctly.
For children
• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that
they are not mistakenly swallowed.
If the following problems occur...
Turn off the TV set and unplug the AC power cord
immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it
checked by qualified service personnel.
When:
– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit or having
something thrown at it.
– Any liquid or solid object falls through openings in the
cabinet.
Precautions
Viewing the TV
• View the TV in moderate light, as viewing the TV in poor
light or during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
LCD Screen
• Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective,
black dots may appear or bright points of light (red, blue,
or green) may appear constantly on the LCD screen. This
is a structural property of the LCD screen and is not a
malfunction.
• Do not push or scratch the front filter, or place objects on
top of this TV set. The image may be uneven or the LCD
screen may be damaged.
• If this TV set is used in a cold place, a smear may occur in
the picture or the picture may become dark. This does not
indicate a failure. These phenomena disappear as the
temperature rises.
• Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in
use. This is not a malfunction.
• The LCD screen contains a small amount of liquid crystal.
Mercury is sometimes contained depending on the kind of
fluorescent tubes. Follow your local ordinances and
regulations for disposal.
Handling and cleaning the screen surface/cabinet of
the TV set
Be sure to unplug the AC power cord connected to the TV set
from AC power outlet before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe gently
with a soft cloth. If dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild detergent solution.
• Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using such materials or
maintaining prolonged contact with rubber or vinyl
materials may result in damage to the screen surface and
cabinet material.
• Periodic vacuuming of the ventilation openings is
recommended to ensure to proper ventilation.
• When adjusting the angle of the TV set, move it slowly so
as to prevent the TV set from moving or slipping off from
its table stand.
Optional Equipment
Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may occur.
010COV.book Page 9 Monday, November 3, 2008 9:49 AM
10
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Overview of the remote
1 TV "/1 – TV standby
Press to turn the TV on or to switch to standby mode.
2 – Wide Mode
Changes the picture size. Press repeatedly to select the desired wide mode.
For TV, Video, HD/DVD, HDMI or DIGITAL MEDIA PORT (except PC
input)
* Parts of the top and bottom of the picture may be cut off.
• You cannot select “Normal” for HD signal source pictures.
For PC Input
3 AUDIO – Dual Sound (page 28)
4 – Picture freeze
Freezes the TV picture. Press once to display a frozen image with the current
programme in a window. Press again to fill the screen with the frozen image.
Press third time to return to the current programme.
• This function is not available for Twin Picture and PC input source.
z • The number 5, N, PROG + and
AUDIO buttons have tactile dots.
Use the tactile dots as references
when operating the TV.
Wide Zoom* Enlarges the centre portion of the picture. The left and
right edges of the picture are stretched to fill the 16:9
screen.
Normal Displays the 4:3 picture in its original size. Side bars are
shown to fill the 16:9 screen.
Full Stretches the 4:3 picture horizontally, to fill the 16:9
screen.
Zoom* Displays cinemascopic (letter box format) broadcasts in
the correct proportions.
Full 1 Stretches the original picture to fill the screen vertically.
Full 2 Stretches the Full 1 picture horizontally to fill the 16:9
screen.
Current programme
(Location of the sub
window can be moved
by pressing
F/f/G/g.)
Frozen picture
010COV.book Page 10 Monday, November 3, 2008 9:49 AM
11
GB
KLV-52/46/40Z450A
4-127-165-11(2)
5 / – Info/Text reveal
• Displays information. Press once to display current channel number and
screen mode. Press again to display clock information. Press third time to
remove the display from the screen.
• In Text mode: Reveals hidden information (e.g. answers to a quiz).
6 / – Input select/Text hold
• Displays the connected equipment list and selects the input source
(page 16).
• In Text mode: Holds the current page.
7 F/f/G/g/ – Item select/OK
• Selects or adjusts items.
• Confirms selected items.
8 TOOLS (page 13)
9 MENU
Displays or cancels the menu.
0 Coloured buttons
In Text mode: Accesses the corresponding coloured Fastext menu quickly
and easily. The Fastext feature can be used only when the Fastext broadcast
is available.
qa Number buttons
• Selects channels. For channel numbers 10 and above, enter the second
digit quickly (page 34).
• In Text mode: Enters the three digit page number to select the page.
qs – Favourite list
Displays the Favourite list that you have specified (page 23).
qd PROG +/–/ /
• Selects the next (+) or previous (–) channel.
• In Text mode: Selects the next ( ) or previous ( ) page.
qf – Previous channel
Returns to the previous channel watched (for more than five seconds).
qf
qd
qs
qa
9
8
7
6
5
q;
Continued
010COV.book Page 11 Monday, November 3, 2008 9:49 AM
12
GB
KLV-52/46/40Z450A
4-127-165-11(2)
qg – Light
Press to illuminate the buttons on the remote so that you can see them easily
even if the room is dark.
qh Buttons for using optional equipment
You can operate the equipment connected to the TV (page 20).
qj SYNC MENU
Displays the menu of connected HDMI CEC (Consumer Electronics
Control) equipment which is supported. While viewing other input screens
or TV programmes, “HDMI Device Selection” is displayed when the button
is pressed.
qk THEATRE
You can set Theatre Mode on or off. When Theatre Mode is set to on, the
optimum audio output (if the TV is connected with an audio system using an
HDMI cable) and picture quality for film videos are automatically set.
• Control for HDMI (BRAVIA Sync) is only available with the
connected Sony equipment that has the BRAVIA Sync logo or is
compatible with control for HDMI.
• If you turn the TV off, Theatre Mode is also turned off.
ql a – TV mode
Exit Text mode, or switches to a TV display when displaying external input.
w; – Twin Picture / PIP (page 18)
Displays two pictures simultaneously.
wa GUIDE /
This button has no function for this TV.
ws RETURN
Returns to the previous screen of any displayed menu.
wd / – Text
In Text mode: Displays Text broadcast.
Each time you press
/, the display changes cyclically as follows:
Text t Text over the TV picture (mix mode) t No Text (exit the Text
service)
~
•Text language displays can be either English, Persian or French
depending on your broadcast signal.
wf 2 +/– – Volume
Adjusts volume.
wg % – Mute
Press to mute the sound. Press again to restore the sound.
z • In standby mode, if you want to turn on the TV without sound, press
this button.
wf
wg
wd
ws
wa
w;
ql
qk
qj
qh
qg
qh
010COV.book Page 12 Monday, November 3, 2008 9:49 AM
13
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Press TOOLS enables you to access various viewing options and change/make adjustments according to the source
and screen mode. The options displayed vary depending on the input source.
Viewing TV programme Viewing connected equipment
Using the Tools menu
Options Description
Picture Mode See page 26.
Sound Mode See page 27.
Surround See page 27.
Intelligent Picture See page 34.
MPEG Noise
Reduction
See page 26.
Speaker See page 31.
Motionflow See page 29.
Add to Favourites You can add the current
channel to the favourite list.
Sleep Timer See page 32.
Power Saving See page 32.
Options Description
Picture Mode (except PC
input mode)
See page 26.
Display Mode (in PC input
mode only)
See page 26.
Sound Mode See page 27.
Surround See page 27.
MPEG Noise Reduction
(except PC input mode)
See page 26.
Speaker See page 31.
Motionflow See page 29.
Twin Picture (except PC and
DMPORT input mode)
See page 18.
PIP (in PC input mode only) See page 18.
Single Picture (in Twin
Picture and PIP mode only)
See page 18.
Audio Swap (in PIP mode
only)
See page 18.
Auto Adjustment (in PC
input mode only)
See page 33.
Horizontal Shift (in PC
input mode only)
See page 33.
Sleep Timer (except PC
input mode)
See page 32.
Power Saving See page 32.
Device Control
[in HDMI input mode
(except HDMI PC input)
only]
Displays the menu screen
to operate the connected
HDMI-compatible
equipment.
Device Control (Menu)
(in DMPORT input mode
only)
If the connected DIGITAL
MEDIA PORT-
compatible equipment has
the operation menu,
displays it directly.
Control Panel
(in DMPORT input mode
only)
Displays the control panel
to operate the connected
DIGITAL MEDIA PORT-
compatible equipment.
010COV.book Page 13 Monday, November 3, 2008 9:49 AM
14
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Overview of the TV buttons and indicators
1 1 – Power
Turns the TV on or off.
• To disconnect the TV from the AC power
completely, pull the plug from the AC power
outlet.
2
Displays or cancels the menu.
3 – OK
In TV menu: Selects the menu or option, and
confirms the setting.
4 – Input select
Displays the connected equipment list and selects the
input source (page 16).
5 ///
In TV menu: Moves through the options right ( ),
left ( ), up ( ) or down ( ).
6 2 /
Increases (+) or decreases (-) the volume.
7 PROG /
Selects the next (+) or previous (-) channel.
8 / – Picture Off / Timer indicator
• Lights up in green when the picture is turned off
(page 32).
• Lights up in amber when the timer is set (page 32).
9 1 – Standby indicator
Lights up in red when the TV is in standby mode.
0 " – Power indicator
Lights up in green when the TV is turned on.
qa Light sensor (page 32)
Do not put anything over the sensor, as its function
may be affected.
qs – Remote sensor
Receives IR signals from the remote.
Do not put anything over the sensor, as its function
may be affected.
890q
a
q
s
2
1
3 4 5
5
76
5 5
010COV.book Page 14 Monday, November 3, 2008 9:49 AM
15
GB
Using Optional Equipment
KLV-52/46/40Z450A
4-127-165-11(2)
Connecting optional equipment
You can connect a wide range of optional equipment to your TV.
Using Optional Equipment
8
DMPORT
S VHS/Hi8/
DVC
camcorder
Headphones
Digital video camera
DVD player with
HDMI output
Home theatre system
Blu-ray disc player
Video game equipment
DVD player without component video
output
VCR
DVD player with component video output
Hi-Fi audio
equipment
DVD recorder
PC
VCR
For service use only
PC with HDMI output
DIGITAL MEDIA PORT
adaptor
Continued
010COV.book Page 15 Monday, November 3, 2008 9:49 AM
16
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Viewing pictures from the connected equipment
Turn on the connected equipment, then press / to display the connected equipment list.
Press F/f to select the desired input source, then press . (The highlighted item is selected if
2 seconds pass without any operation after pressing F/f.) When the input source is set to “Skip”
in the “Video Labels” under the “AV Set-up” menu (page 30), that input does not appear in the
list.
z • Press on the TV to display the connected equipment list and select the desired input source. Then wait for 2
seconds to display the selected input source.
Jacks/
Input symbol on screen
Description
A HDMI IN 2
I HDMI IN 1 or 3
HDMI 1 or
HDMI 2 or
HDMI 3
Connect to the HDMI IN 1, 2 or 3 jack if the equipment has an HDMI jack. The digital
video and audio signals are input from the equipment. In addition, when you connect
the equipment that is compatible with control for HDMI, communication with the
connected equipment is supported. Refer to page 31 to set-up this communication. For
equipment with DVI jack, connect the DVI jack to the HDMI IN 3 jack using a DVI-
HDMI adaptor interface (not supplied). Then, connect the equipment’s audio out jack
to the audio in jack of the HDMI IN 3.
• The HDMI jacks only support the following video inputs: 480i, 480p, 576i, 576p,
720p (50/60 Hz), 1080i (50/60 Hz), 1080p (50/60 Hz) and 1080/24p.
• Be sure to use only an HDMI cable that bears the HDMI logo (recommended
Sony HDMI cable).
• When connecting an audio system with HDMI jack, be sure to also connect to the
audio output jacks (refer G in page 15) to listen to the sound from the TV
on audio system.
B 2, and 2
Video 2
Connect to the video jack 2, and the audio jacks 2. If you connect mono
equipment, connect to the L(MONO) jack 2.
C i Connect to the i jack to listen to sound from the TV on headphones.
D 1 or 1 or 3,
and 1 or 3
Video 1 or
Video 1 or
Video 3
Connect to the S video jack 1 or the video jack 1 or 3, and the audio jacks
1 or 3. To avoid picture noise, do not connect the camcorder to the video jack 1
and the S video jack 1 at the same time. If you connect mono equipment, connect
to the L(MONO) jack 1 or 3.
E / Connect to the video output jack to record the image from the TV. Connect to the
audio output jacks to record the sound from the TV on DVD recorder or VCR. To
turn off the sound of the TV speakers, set “Speaker” to “Audio System” (page 31). If
you connect mono equipment, connect to the L jack .
• The monitor output jacks cannot support HD/DVD, HDMI and PC signals source
pictures, also digital audio signal for sound.
F / 1 or 2
HD/DVD 1 or
HD/DVD 2
Connect to the component jacks and the audio jacks / 1 or 2. For better picture
quality, component connection is recommended if your DVD player has a component
video output.
G Connect to the audio output jacks to listen to the sound from the TV on Hi-Fi audio
equipment. To turn off the sound of the TV speakers, set “Speaker” to “Audio System”
(page 31).
H PC IN (RGB)/
PC
Connect to the PC IN (RGB) jack and the audio jack . It is recommended to
use a PC cable with ferrite core.
010COV.book Page 16 Monday, November 3, 2008 9:49 AM
17
GB
Using Optional Equipment
KLV-52/46/40Z450A
4-127-165-11(2)
J DMPORT
DMPORT
You can play audio or video (optional cable required) of a portable audio player that is
connected to the TV using a DIGITAL MEDIA PORT adaptor.
Depending on the connected DIGITAL MEDIA PORT adaptor, you can operate the
connected equipment using the TV as follows;
– Using the remote of the TV: N/x/X/m/M.
– Using the Tools menu function: Press TOOLS, and select “Control Panel”.
• This function may be not available for certain connected equipment. Refer to the
instruction manual of the connected equipment for details.
• Do not connect or disconnect a DIGITAL MEDIA PORT adaptor while the TV
is turned on.
• The connected equipment is not charged when the TV is turned off or in standby
mode.
Jacks/
Input symbol on screen
Description
010COV.book Page 17 Monday, November 3, 2008 9:49 AM
18
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Viewing Twin Picture
You can view two pictures (external input and TV
programme) on the screen simultaneously.
Connect the optional equipment (page 15), and make
sure that images from the equipment appear on the
screen (page 16).
1 Press .
Two pictures are displayed simultaneously.
2 Press G/g to select active picture.
3 Press number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press or RETURN.
• This function is not available when displaying a
PC input or DIGITAL MEDIA PORT input.
• You cannot change the size of the pictures.
• The picture and sound from the monitor output
jacks / (refer E in page 15) will follow
the left picture (Video 1/S Video 1/Video 2/
Video 3 only). However, if audio output jacks
(refer G in page 15) are connected, the sound will
follow TV speaker.
• In Twin Picture mode, as picture size reduced, this
may decrease picture smoothness.
z • The highlighted picture is audible. You can switch
the audible picture by pressing G/g.
• You can also use the Twin Picture feature by
selecting “Twin Picture” from the Tools menu.
Viewing PIP (Picture in
Picture)
You can view two pictures (PC input and TV
programme) on the screen simultaneously.
Connect a PC (page 15), and make sure that images
from a PC appear on the screen (page 16).
1 Press .
Two pictures are displayed simultaneously.
2 Press number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press
RETURN.
• You cannot display resolutions higher than
WXGA (1360 × 768 pixels).
• “Power Management” is not available in PIP
mode (page 33).
• The sound will follow TV speaker when audio
output jacks (refer G in page 15) are
connected.
• In PIP mode, as picture size reduced, this may
decrease picture smoothness.
z • You can switch the audible picture by selecting
“Audio Swap” from the Tools menu.
• You can also use the PIP feature by selecting
“PIP” from the Tools menu.
Twin Picture Availability
In Left Window In Right Window
Video 1 or S Video 1
Video 2
Video 3
HD/DVD 1
HD/DVD 2
HDMI 1 (except PC input mode)
HDMI 2 (except PC input mode)
HDMI 3 (except PC input mode)
TV programme
Left
Window
Right Window
PIP Availability
In Main Window In Sub Window
PC
HDMI 1 (in PC input mode only)
HDMI 2 (in PC input mode only)
HDMI 3 (in PC input mode only)
TV programme
Sub Window
(Location of the
sub window can
be moved by
pressing
F/f/G/g.)
Main
Window
010COV.book Page 18 Monday, November 3, 2008 9:49 AM
19
GB
Using Optional Equipment
KLV-52/46/40Z450A
4-127-165-11(2)
Using BRAVIA Sync
(Control for HDMI)
The control for HDMI function enables the TV to
communicate with the connected equipment that is
compatible with the function, using HDMI CEC
(Consumer Electronics Control).
For example, by connecting Sony equipment that is
compatible with control for HDMI (with HDMI
cables), you can control them together.
Be sure to connect the compatible equipment
correctly, and make the necessary settings.
Connect the compatible equipment and the TV with an
HDMI cable. When connecting an audio system, in
addition to the HDMI cable, be sure to also connect to
the audio output jacks (refer
G in page 15) to
listen to the sound from the TV on audio system. For
details, see page 15.
The control for HDMI settings must be set on both the
TV side and the connected equipment side. See
“HDMI Set-up” on page 31 for the TV side settings.
See the operating instructions of the connected
equipment for setting details.
• Automatically turns the connected equipment off
when you turn the TV off.
• Automatically turns the TV on and switches the
input to the connected equipment when the
equipment starts to play.
• If you turn on a connected audio system while the
TV is on, the sound output switches from the TV
speaker to the audio system.
• Adjusts the volume (2 +/–) and mutes the sound
(%) of a connected audio system.
• You can operate the connected Sony equipment that
has the BRAVIA Sync logo by the TV remote by
pressing:
– N/x/X/m/M to operate the connected
equipment directly.
– SYNC MENU to display the menu of the connected
HDMI CEC equipment which is supported on the
screen.
After displaying the menu, you can operate the
menu screen by using F/f/G/g and .
– TOOLS to display “Device Control”, then select
options from “Menu”, “Options”, and “Content
List” to operate the equipment.
Refer to the instruction manual of the equipment for
available control.
To connect the equipment that is
compatible with control for HDMI
To make the control for HDMI settings
Control for HDMI
010COV.book Page 19 Monday, November 3, 2008 9:49 AM
20
GB
KLV-52/46/40Z450A
4-127-165-11(2)
Operating Optional
Equipment using the TV
Remote
For details, refer to the operating instructions
supplied with the connected equipment.
z • The N button has a tactile dot. Use the tactile dot
as a reference when operating other equipment.
This remote is preset to operate Sony TVs, and
most Sony Blu-ray disc players, DVD players,
DVD recorders, and audio systems (Home
Theatre, etc.).
To control such Sony Blu-ray disc players, DVD
players, and DVD/HDD recorders, programme
the remote as follows.
• Before you start, look up the three-digit code of
your equipment from the “Manufacturer’s codes”
on page 21.
Buttons for using optional equipment
1
2
3
4
5
6
7
Item Description
1 "/1 Turns on or off the optional
equipment you have selected
with the function buttons.
2 Function
buttons
Allows you to operate the
corresponding equipment. For
details, see “Programming the
remote” on page 20.
3 BD/DVD
operating
buttons
• ./>: Goes to the
beginning of the previous/
next title/chapter/scene/
track.
• / : Replays the scene/
briefly fast forwards the
scene.
• m/M: Fast reverses/fast
forwards the disc when
pressed during playback.
• N: Plays a disc at normal
speed.
• X: Pauses the playback.
• x: Stops the playback.
4 DVD record
buttons
• z REC: Starts the
recording.
• X REC PAUSE: Pauses the
recording.
• x REC STOP: Stops the
recording.
5 F1/F2 • Selects a disc when using a
disc changer.
• Selects a function when
using a combination unit
(e.g. a DVD/HDD).
6 BD/DVD
MENU
Displays the BD/DVD disc
menu.
7 BD/DVD
TOP MENU
Displays the top menu of the
BD/DVD disc.
Programming the remote
010COV.book Page 20 Monday, November 3, 2008 9:49 AM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
Sony KLV-46Z450A Operating instructions
- Category
- CRT TVs
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sony KLV-46X300A Operating instructions
-
Sony Bravia KLV-26U300A User manual
-
-
-
-
-
-
-
-
Sony KLV-40S400A Operating instructions
