PN 97999Ć919
93106Ć1 Foot Manifold (2)
Y84Ć303ĆT Bolt (4) (#10 Ć 24 x 1Ć1/2")
Y22Ć10ĆS Nut (4) (#10 Ć 24)
93101Ć1 Swivel (1)
``O" Ring (2) (see chart) (3/32" x 1Ć3/16" o.d.)
93099 Clamp (4)
1/2”
DIAPHRAGM PUMP
OPERATOR’S
MANUAL
670007-X
RELEASED: 6-1-00
REVISED: 6-22-10
(REV.
B)
1:1
RA
TIO (NON-METALLIC)
INCLUDE MANUALS: 66605XĆX 1/2" Diaphragm Pump (PN 97999Ć099)
GENERAL
DESCRIPTION
The 670007Ć3XX 1/2" diaphragm pumps are similar to 66605JĆ3XX
Polypropylene diaphragm pumps. These pumps feature a 3Ćpiece inlet
manifold and a single piece outlet manifold.
The 670007Ć3XX models and their standard model counterparts are
shown in the chart at right. A 66605XĆX Operator's Manual (PN
97999Ć099) is to be used for General Information, Installation, OperaĆ
tion and Maintenance. Refer to the standard 66605XĆX Operator's
Manual for Service Kits and other information. Follow the standard
parts list with the exception of the items listed below.
MODEL CHART
670007ĆX MODEL STANDARD MODEL FLUID SECTION
REPAIR KIT
670007Ć322 66605JĆ322 637140Ć22
670007Ć344 66605JĆ344 637140Ć44
670007Ć388 66605JĆ388 637140Ć88
670007Ć3EB 66605JĆ3EB 637140ĆEB
MODEL ``O" RING MATERIAL
670007Ć322 Y325Ć120 Nitrile
670007Ć344 94749
670007Ć388 93118 Urethane
670007Ć3EB 93762 E.P.R.
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com
PTFE
/
