2. Computers & electronics
  3. Networking
  4. Power Line Communication (PLC)
  5. PowerLine network adapters
  6. Advent
  7. APWL-2012

Advent APWL-2012 User manual

  • Hello! I am an AI chatbot trained to assist you with the Advent APWL-2012 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Powerline
Starter Kit
Instruction Manual
APWL2012
CONTENTS
4 System Requirements
5 Unpacking
6 Product Overview
7 Connecting Mechanism
7 LED indicator
8 Physical Interface
9 Hardware Connection – Computer
10 Hardware Connection – Internet
11 Installing PowerLine Utility
15 Using the PowerLine Utility
15 AccessingtheCongurationSettings
16 Status
17 SettingLocalDevice’sNetworkName
18 Network
20 Renaming the Powerline Adaptor and Enter Password
22 Adding a Remote Powerline Adaptor
24 System
25 Upgrade Firmware
26 Resetting to Default
28 SettingAllDevices’NetworkName
3
29 How To Use The Pair Buttons
29 Pairing(securewith128-bitAES)
29 SettingUpaPowerlineAVNetworkwiththePairButton
30 CreatingaPowerlineNetworkUsingthePairButtons
30 JoininganExistingPowerlineAVNetwork
31 LeavinganExistingPowerlineAVNetwork
31 ResettingthePowerlineAVNetwork
32 Hints And Tips
33 Safety
34 Product Specifications
4
TheAdvent200MbpsEthernetPowerlineAdaptoroffersthefollowing
features:
> Extendsyourcomputernetworktothewholehouse
> Addsapreviously-unassociateddevicetoanexistingconnection
SYSTEM REQUIREMENTS
1. Minimum2xAC100V~240Vpoweroutlets
2. At least 2 Powerline Adaptors
3. Standardhomepowerwiring
4. A computer with the following:
> OperatingSystemwithTCP/IPinstalled
> PentiumIIIcompatibleprocessorandabove
> EthernetLANcardinstalledwithTCP/IPprotocol
> 64MBRAMormore
> 50MBoffreediskspace(minimum)
> CD-ROMDrive
Thank youforpurchasingyournewAdventPowerline
Adaptor Kit.
We recommend that you spend some time reading this instruction
manual in order to fully understand all the operational features
offered.
Readallthesafetyinstructionscarefullybeforeuseandkeepthis
instruction manual for future reference.
5
UNPACKING
Removeallpackagingfromtheunit.Retainthepackaging.Ifyoudispose
of it please do so according to local regulations.
The following items are included:
Powerline Adaptor x 2
Quick Start Guide
P.N.:APWL2012-QSG
CD-ROM
P.N.:APWL2012-CD001
Ethernet (RJ-45) Cable x 2
P.N.:APWL2012-Ethernet
PWR
PLC
ETH
6
PRODUCT OVERVIEW
PWR
PLC
ETH
Pair
Ethernet PortPairButton
Plug
Powerline Indicator
(PLC)
Ethernet Indicator
(ETH)
Power Indicator
(PWR)
7
CONNECTING MECHANISM
Maximumdistancebetween2xPowerlineAdaptorsis300m,without
obstructions.
LED indicator
TheLEDindicatordisplaysinformationaboutthePowerlineAdaptor’s
status.
Item Status Indication
Power
indicator
(PWR)
Off The Powerline Adaptor is off.
Solidlylit The Powerline Adaptor is on.
Flashing
ThePowerlineAdaptorisinpower-saving
mode.
Powerline
indicator
(PLC)
Off
ThePowerlineAdaptorisn’tconnectedtoany
powerlinenetworkorisinpower-savingmode.
Solidlylit
The Powerline Adaptor is connected to a
powerlinenetwork.
Flashing The Powerline Adaptor is transferring data.
Ethernet
indicator
(ETH)
Off TheEthernetportisn’tconnected.
Solidlylit
TheEthernetportisconnected,butthereisno
data being transferred.
Flashing The Ethernet port is transferring data.
5minutesafterthedevicehasbeenconnectedtothePowerlineAdaptoris
switchedoff,thePowerlineAdaptorwillautomaticallyenterpower-savingmode.
ThePowerlineAdaptorsworkinpairs;youneedonePowerlineAdaptor
connected to the internet and also one Powerline Adaptor per computer you
wishtoconnecttothenetwork.
8
Physical Interface
There are 3 physical interfaces on this Powerline Adaptor.
Item Usage / Description
Ethernet
Port
• 10/100MbpsUBSport
• Connects the Powerline Adaptor to a PC or broadband
devicewithnetworkcable
Plug
• ConnectsthePowerlineAdaptortoa100V~240VAC
powersocket.
PairButton
• Securesapowerlinenetwork
• Follow the steps below:
1. Plug in a new Powerline Adaptor.
2. Press the Pairbuttonfor3-8seconds,thenrelease,
the PWR indicator will start to flash.
3. Plug in the 2nd Powerline Adaptor.
4. Pressthe2ndPowerlineAdaptor’sPair button for
3-8 seconds then release. The PWR indicator will
start to flash.
5. Wait for about 1 minute for the Powerline Adaptors
to finish connecting.
BothPair buttons must be pressed within 2 minutes of
each other.
9
Hardware Connection – Computer
ToconnectacomputertothePowerlineAdaptor,youmustusean
Ethernet(RJ-45)cable(included).
Follow the steps below to connect a computer to the Powerline Adaptor.
1. ConnecttheprovidedEthernetcabletoyourcomputer’sLANport.
2. Connect the other end of the Ethernet cable to the Powerline
Adaptor’sEthernetport.
3. PlugthePowerlineAdaptorintoawallsocketnexttothecomputer.
Ensurethewallsocketisturned‘ON’.
4. Turn on your computer.
5. Checkandconfirmthatthe PWR indicator and ETH indicator
on the Powerline Adaptor are ON.
Ethernet
Cable
ConnecttoMains
Socket
Connect to
Adaptor’s
Ethernet port
Connect to
computer’s
Ethernet port
10
Hardware Connection – Internet
ToconnectthePowerlineAdaptortoyourexistingbroadbandservice,
follow the steps below:
1. ConnecttheEthernetcabletoanavailableEthernetportofyour
ADSLBroadbandRouter.
2. Connect the other end of the Ethernet cable to the Powerline
Adaptor’sEthernetport.
3. PlugthePowerlineAdaptorintoawallsocketnexttothecomputer.
Ensurethewallsocketisturned‘ON’.Turnonyourcomputer.
4. Checkandconfirmthatthe PWRindicator, PLCindicator,and
ETH indicator on the Powerline Adaptor are ON.
5. If the PLCindicatordoesnotilluminate,pleasefollowtheroutine
for pairing the Powerline Adaptors.
1WAN 2 3 4
Internet
Ethernet Cable
(notincluded)
ConnecttoMainsSocket
ConnecttoAdaptor’s
Ethernet Port
ConnecttoAdaptor’s
Ethernet Port
Connect to
computer’s
Ethernet port
Ethernet
cable
(included)
Ethernet
cable
(included)
The Powerline Adaptor must NOT be connected to:
> anextensionlead/cord/board
> a multiplug
> a surge protector
Theabovemaynegativelyaffectyourhomenetworkperformance.
11
INSTALLING POWERLINE UTILITY
Pleaseverifythatthefollowingiscorrectbeforeinstallingtheprovided
software:
Item Status If Status is Not Correct, then:
Other Powerline
Adaptor(s)
None Uninstall,thenrestartthecomputer
Other Encryption
ManagementUtilities
None Uninstall,thenrestartthecomputer
Other Powerline Utilities None Uninstall,thenrestartthecomputer
EnsureyouhavealreadyinstalledWinPcap(4.11orabove)(notincluded)
before installing the PowerLine Utiltiy.Ifnot,awindowwillpopupforyouto
install WinPcap 4.1.1.
1. InsertthesuppliedResourceCDintoaCDdriveonthecomputer
that is connected to your router.
2. Double-clickAPWL2012. All necessary files will be copied to your
computer.
IftheCDdoesnotstartautomatically,goto“My Computer CD/
DVD Drive APWL2012”.Double-clickAPWL2012.
12
3. Follow the prompts on the Installation Wizard Windows.
13
14
4. Afterinstallation,ashortcuttothe“APWL2012”
application icon will be automatically placed on
the Windows
®
desktop.
APWL2012
15
After successfully installing the Powerline Adaptor hardware and
software,youcansetuporconfiguredevicesaccordingtoyourneeds.
The Ethernet Powerline Adaptor Configuration Utility allows you to do the
following:
> IdentifyPowerlinedevicesonthePowerlinenetwork
> Measuredatarateperformance
> Ensureprivacy
> Perform diagnostics through setting user-defined secure Powerline
networks
USING THE POWERLINE UTILITY
Accessing the Configuration Settings
1. Double-clicktheAPWL2012 icon onthedesktop.
2. The Powerline Utility window will pop up showing 3 tabs: Status,
Network,andSystem.
This procedure is only recommended for experienced users.
16
Status
The Status tab shows the information of the Powerline Adaptor that is
connected to the current computer that is running the PowerLine Utility
programme.Inthiswindow,youcanalsosettheNetworkName.
MAC Address
Show’sthePowerlineAdaptor’sMACaddress.
Network Name
ShowsthecurrentNetworkName.YoucanchangetheNetworkNameby
typingintothetextboxnextto“Network Name”.
ThedefaultnameforthenetworknameisHomePlugAV.
Use Default (HomePlugAV)
Checktheboxifyouwishtousethedefaultnetworkname.
Apply
ClickApply to confirm the settings.
Password
ShowsthecurrentpasswordofthePowerlineAdaptor.Notetheformatof
the password.
17
Firmware
ShowsthecurrentfirmwareversionusedbythePowerlineAdaptor.
RefreshButton
ClicktheRefresh button to update the information.
Setting Local Device’s Network Name
Setsthelocaldevice’snetworkname.
1. ClicktheStatus tab to display the Status window.
2. Enteranameforthecurrentnetworkingusing4-23characters.
3. ClickApply to confirm the settings.
If you want to use the default name (HomePlugAV)asyournetwork
name,checkthe“Use Default (HomePlugAV)”,thenclicktheApply
button to confirm.
18
Network
The Network tab shows all the Powerline Adaptors found on the current
logicalnetwork.Furthermore,youcanchangetheNameofthelisted
PowerlineAdaptorsaswellasaddanotherdevicetothecurrentnetwork.
Type
Showsthetypeofremotedevicefoundinthenetwork(notthedevice
currentlyconnectedtothecomputerinuse).
Name
Showsthenameoftheremotedeviceinthenetwork.
MAC Address
ShowstheMACaddressoftheremotedevicefoundinthenetwork.
EnsureallPowerlineAdaptorsarenotinPowersavemode( PWR indicator
flashing).Ifso,poweroff/on.
19
Rate (Mbps)
ShowsthecurrenttransmissionrateofthePowerlineAdaptor(notthe
maximumrateof200Mbps).
Option
ChangethecorrespondingPowerlineAdaptor’snameandpasswordby
selectingthedeviceandclicktheModify button.
RescanButton
ClicktheRescan button to perform an immediate search of the
Powerline Adaptor.
Password
Onfirstuse,thisisblank.
Ifapasswordhasbeenset,thissectionwillshowthecurrentpassword
of the Powerline Adaptor.
Whencreatingaprivatenetwork,ormanagingalldevices,apasswordis
required.Tosetthepassword,followthestepsbelow:
1. Selectthetargetdevicelistedinthewindow.
2. ClickModify.
3. Follow the prompts in the pop-up dialogue boxes to complete your
password setting.
The Adaptor will automatically perform the scanning process and update the
displayeveryfewsecondsbydefault.
> Thepasswordtypicallyappearsasanalphanumericcode,ingroupsof4,
separatedbydashesandcanbefoundonthebackoftheAdaptor,
i.e.,CNBT-OLEG-IPLK-YPGR.
20
Renaming the Powerline Adaptor and Enter Password
Inthistab,youcan:
> Changethenameoftheremoteadaptor(s).
> Selectthedesiredadaptorandchangeitspassword,soyoucanset
theNetworkNameintheSystemconfigurationtab.
Tochangethenameoftheremoteadaptor(s)andenteritspassword,
follow the steps below:
1. In the Networkwindow,selectthedesiredPowerlineAdaptor.
2. ClicktheModify button to display the dialogue window.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/