REMOTE CONTROL RB-TS780
R-AUDIO-L VIDEO
AUDIO
VIDEO
INPUT
1
Need help? Call
1-800-813-3435
Weekdays: 7:30 AM - 4:00 PM
Central Time
Quick-Guide
DWM-2600
DVD Home Theater System
Accessories
1
Wireless remote
control
Video cable
Hook up
(Antenna connections)
2
2 “AA” batteries
(not supplied)
AM loop antenna
FM indoor antenna
lead wire
Do not connect the power cord to a 120V AC 60Hz
outlet until all connections have been made.
If your TV has a Video input jack...
4
TV
AM loop antenna
FM indoor antenna
lead wire
Video cable
Yes
No
After all connections
have been made, con-
nect the power cord to
a 120V AC 60Hz out-
let.
To AC 120V,
60Hz
Plug
1AD6P1P2007-- DWM-2600, Issue Number 1, Printed in China
Note:
For the COMPONENT
VIDEO OUT jacks
connection and the
PROGRESSIVE mode
setting, see pages E8,
E10, and E16 of the
instruction manual.
DWM-2600 Quick(Eng).p65 03.12.19, 0:45 PM1
CENTER
REAR R
REAR L
FRONT R
FRONT L
SUBWOOFER
Hook up
(Speaker connections)
3
Surround right
speaker
Front left speaker
Center speaker
Front right speaker
Surround left speaker
Subwoofer
Front left speakerFront right speaker Center speaker
Surround left speakerSurround right speaker Subwoofer
Twist and pull it
off.
Tube of Speaker Wire Use
(Positive Polarity)
FRONT R (Red) Front right speaker
FRONT L (White) Front left speaker
CENTER (Green) Center speaker
REAR R (Gray) Surround right speaker
REAR L (Blue) Surround left speaker
SUBWOOFER (Violet) Subwoofer
DWM-2600 Quick(Eng).p65 03.12.19, 0:45 PM2
34
CHANNEL
TO TV
ANT. IN
R-AUDIO-LVIDEO
A/V INPUT JACKS
VHF/UHF
ANTENNA
IN
34
CHANNEL
VHF/UHF
FROM ANT.
IN
OUT
TO TV
IN OUT
LINE1(AUX1)
VIDEO
L
R
L
R
AUDIO
34
CHANNEL
TO TV
ANT. IN
R-AUDIO-LVIDEO
A/V INPUT JACKS
VHF/UHF
ANTENNA
IN
4A
Hook up (Using RF Modulator, not supplied)
Unit, TV and RF Modulator connections
Unit, VCR, TV and RF Modulator connections
Set the channel number CH3 (or CH4) on all
TV, VCR and RF Modulator, whichever is not
used for regular broadcasts in your area.
TV
Set the channel number CH3 (or CH4) on both
TV and RF Modulator, whichever is not used
for regular broadcasts in your area.
TV
RF Modulator
RF Modulator
HiFi Stereo VCR
TV/CATV Antenna Cable
TV/CATV Antenna Cable
To AC 120V, 60Hz
To AC 120V, 60Hz
5A
Important Information:
Do not connect the unit to a VCR
directly. The playback picture will be
distorted because DVD video discs
are copy protected.
DWM-2600 Quick(Eng).p65 03.12.19, 0:45 PM3
POWER
CH
–
+
VOL
–+INPUT
VIDEO 1
1
2
CH03
POWER
123
45
6
7
8
0
9
12
3
45
6
7
8
0
9
2
2
11
1
2
MENU
Play Movie
Languages & Audio Set-Up
Subtitles
Theatrical Trailers
Scene Selections
3 2
4
1
21
If a DVD disc menu appears
on the TV screen...
TV
5
TV setting
or VIDEO, VIDEO 1, VIDEO 2, A/V, etc.
5A
Load the disc and
start playback.
7
6
TV setting
Your TV remote
controller
Press [0], then [3] (or [4]).
Turn on your television.
Select the video input
source from your televi-
sion.
(Refer to your TV’s owner
manual.)
Turn on your televi-
sion.
Set the channel num-
ber CH3 (or CH4) on
your television, which-
ever is not used for
regular broadcasts in
your area.
Label facing up
TV
TV
Press the ENTER
button.
Playback starts.
Select the “Play
Movie” by the ar-
row button.
CAUTION:
• Do not apply pressure to the
disc after automatic loading
begins.
• Do not pull the disc out while
the disc is retracting into the
loading slot. This will damage
the inside of the unit and the
disc.
Ejecting Disc
CAUTION:
Never touch the disc while the disc being ejected. This will
damage the inside of the unit and the disc.
Note:
If you do not remove the disc within approximately 2 minutes,
the disc is automatically retracted into the loading slot. Some
DVD video discs may start playback automatically.
or
Select
“DVD/CD”.
DWM-2600 Quick(Eng).p65 03.12.19, 0:45 PM4
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sanyo DWM-2600 User manual
-
-
-
-
-
-
-
-
-