Proeld Pro eld prs User manual

  • Hello! I am an AI chatbot trained to assist you with the Proeld Pro eld prs User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Driver’s Card (AOBRD Mode)
HOS247 certifies that use of the HOS247 app with HOS247 device
complies with all requirements for automatic on-board recording
devices (AOBRD) as defined in Federal Motor Carrier Safety
regulation 49 CFR part 395.15
www.hos247.com
Contact the support team at 415-839-9977 or [email protected]
HOS247 device plugs into the
diagnostic port in a vehicle
and is integrally synchronized
with the engine.
It automatically records
driving time and connects to
the HOS247 app on the
driver’s mobile device via
Bluetooth. Drivers are not able
to edit driving time when
using the HOS247 AOBRD.
www.hos247.com
Contact the support team at 415-839-9977 or [email protected]
2
When using an AOBRD, you are not required to produce a printed copy
during a roadside inspection. If the inspector requests a copy of your
logs, you can fax or email them directly from the DOT Inspection
screen. You are not required to produce a copy during an inspection, but
this can be easier than requesting it from your office.
Send Logs
Tap “DOT Inspection” in the menu & press “Start Inspection. Let an officer to view
your logs directly from your mobile device. Show this instruction card if requested.
An inspector may press arrows to view previous or next day’s logs.
An inspector may view the log form, the log graph and the log events with notes.
Exit the inspection mode by pressing back arrow in the left top corner of the app.
DOT Inspection (AOBRD Mode)
www.hos247.com
Contact the support team at 415-839-9977 or [email protected]
3
HOS247 ELD is capable of producing and transferring the ELD records
via telematics transfer methods: Wireless Web services and Email. In
order to send the ELD records via Web services a driver must press
“DOT Inspection” menu item and then press “Send Logs” button. In
order to send the ELD records via Email a driver must press “DOT
Inspection” menu item, press “Email Logs”, enter an email provided by
an authorized safety official and press “Send“ button.
Send Logs
Tap “DOT Inspection” in the menu & press “Start Inspection. Let an officer to view
your logs directly from your mobile device. Show this instruction card if requested.
An inspector may press arrows to view previous or next day’s logs.
An inspector may view the log form, the log graph and the log events with notes.
Exit the inspection mode by pressing back arrow in the left top corner of the app.
DOT Inspection (ELD Mode)
www.hos247.com
Contact the support team at 415-839-9977 or [email protected]
Malfunction Manual
in accordance with the guidelines set forth in 395.34
Immediately contact the support if LED light on the device is off when the device is
plugged into the diagnostic port or if the malfunction reported by the app.
Malfunction indication
Note the malfunction and provide a written notice to your fleet within 24 hours.
Note the malfunction
Keep a paper log for that day and until the device is repaired or replaced. In the event
of an inspection, display the previous 7 days from the app.
Switch to paper logs
In the event of an ELD malfunction, the motor carrier must take actions to correct the
malfunction within 8 days of discovery.
/