Global Direct 21244 Installation guide

STYLE# 21244

Careful unpack all lamp parts from the carton.

1.Carefullyremoveallpartsfromthecarton.

2.BesurethepowertotheinstallationpointisOFF.

3.FastentheCrossbartotheoutletbox.Locatethe

NippleandthreadintothecenteroftheCrossbar.

4.LocatetheFixtureChain、CeilingCanopy、

CanopyChainLoop、AcrylicDiskandCanopyLock

ring.PasstheFixtureSupplyWireandGroundWires

throughinthefollowingorder:1)AlternateFixture

LoopsintheFixtureChain;2)CanopyLockring;

3)CanopyChainLoop;4)CeilingCanopy.

Finally,proceedtopassthewiresthroughthe

NippleattachedtotheCrossbar,

5.LocatetheDecorativeGlassTubeandpasstheglass

tubeovertheCandleCover.

6.LifttheFixtureBodyupwardandattachedtothe

endofSupportArms.LocatetheendofSupport

ArmsontotheHooksinsideoftheMarbleShade.

7.Installcorrectbulbs(notincluded)referringto

fixturemarkingsand/orlabelsformaximumwattage.

Your installation is completed now. Restore electricity.

Retain this sheet for future reference !

ASSEMBLY INSTRUCTIONS