EDIFIER TWS2 True Wireless Earbuds User manual

Brand: EDIFIER

Model: TWS2 True Wireless Earbuds

Type: User manual

Manuals+

User Manuals Simplified.

EDIFIER TWS2 True Wireless Earbuds User Manual

May 12, 2022May 12, 2022 Leave a comment on EDIFIER TWS2 True Wireless Earbuds User Manual

Home » Edifier » EDIFIER TWS2 True Wireless Earbuds User Manual

EDIFIER TWS2 True Wireless Earbuds

Contents hide
1 NOTICE
2 User Guide
2.1 Pairing Your Ear Buds
3 Functional Operation for music and answering calls
4 Charging the Fun Buds -Indicator Light status
5 FAQ’S
6 SPECIFICATIONS
7 Package Contains
8 FCC Warning
9 Documents / Resources
9.1 Related Manuals / Resources
NOTICE
1.  Keep the product dry; do not place the product in damp places.
2.  Do not disassemble the product.
3.  When charging Use the Micro USB charging cord that came with the ear buds.
User Guide
Pairing Your Ear Buds
Take out the ear buds from the charging case.
Press the multi-function button down for 3 seconds on each ear bud until you see a flashing light you will hear a
“Pairing” sound, then you can connect your ear buds to your device.
Go into the Bluetooth settings on your device.
Search for “FBP-1” and select it to connect.

After the connection is successful, the voice prompt will say “connected” and the blue light flashes slowly.

Functional Operation for music and answering calls

Tap the multi function button on the Fun Buds to pause and tap again to play music.

Next Song / skip tracks: Double tap twice the multi function button on the (Right) Fun Bud.

Previous Song: Double tap twice the multi function button on the (left) Fun Bud.

To answer a Phone call tap on the Multi function button on the (right) Fun bud.

Charging the Fun Buds -Indicator Light status

Low Battery: Light ashes slowly and sound will cut out

Charging: Red light is blinking

Charging the Ear buds: To Charge the Fun Buds connect the supplied Micro USB cord to the open USB port on

the bottom of the case. (When charging you will see the red light blinking) When charging is complete the light

will go solid.

FAQ’S

Question: What if only one ear bud is working?

Answer: It can mean 2 things.

1. You will need to charge up the ear buds using the supplied charging cord.

2. Place both ear buds back into the case close and it for 10 seconds. Open case and contune to pair the ear

buds.

SPECIFICATIONS

Speaker driver: 10mm

Bluetooth Range: 10M

Continuous playing time: 3-5 Hours

Charging time: 1.5 hours

Ear bud battery capacity: 30 mAh each

Charging case capacity: 200 mAh

Charging Time: 1.5 Hours

Play Time: 3 hours

Standby Time: 50 hrs

Charging Port: Micro USB

Mic function: Yes

Pick up function: Yes

Bluetooth version: 5.0

Package Contains

User Manual

Micro USB Charging Cable

Charging case and Ear Buds

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable

exposure condition without restriction.

FCC ID: 2AY4Z-TWS2

True Wireless Earbuds User Manual
True Wireless Earbuds User Manual
Tranya T40 True Wireless Earbuds User Manual
Tranya T40 True Wireless Earbuds
Blackweb True Wireless Earbuds BWD19AAH User Manual
Blackweb True Wireless Earbuds BWD19AAH User Manual Blackweb True
Wireless Earbuds BWD19AAH User Manual - Optimized PDF Blackweb…
EDIFIER True Wireless Gaming Earbuds User Guide
Please visit HECATE website for the full version user manual:
www.hecategaming.com Model: EDF700009 FCC ID: Z9G-EDF140 IC:
10004A-EDF140…
To explore our full selection of products, visit us at :  www.trendtechbrands.com
Go to www.trendtechbrands.com to register your product.
Product must not show signs of physical damage or water damage for warranty coverage.
Wireless ExpressTM
53-57 North Mall Plainview, New York 11803
Made In China
The EU Deceleration of conformity is available at: www.trendtechbrands.com
Documents / Resources
EDIFIER TWS2 True Wireless Earbuds [pdf] User Manual
TWS2, 2AY4Z-TWS2, 2AY4ZTWS2, TWS2 True Wireless Earbuds, TWS2, True Wireless Earbuds
Related Manuals / Resources

EDIFIER TWS2 True Wireless Earbuds User manual

EDIFIER TWS2 True Wireless Earbuds User manual

EDIFIER TWS2 True Wireless Earbuds User manual

Related papers

Other documents