Solinst 12 volt air compressor Operating instructions

12 volt air compressor
Brand
Solinst
Model
12 volt air compressor
Category
Cable assembly tools
Type
Operating instructions

Solinst 12 volt air compressor is a powerful and versatile tool designed for a wide range of applications. With its ability to deliver high-pressure air, it can inflate tires, power pneumatic tools, and even fill scuba tanks. Its compact design and easy-to-use controls make it ideal for both professional and DIY enthusiasts. Whether you're working on a construction site or simply need to inflate your bike tires, the Solinst 12 volt air compressor is up to the task.

Solinst 12 volt air compressor is a powerful and versatile tool designed for a wide range of applications. With its ability to deliver high-pressure air, it can inflate tires, power pneumatic tools, and even fill scuba tanks. Its compact design and easy-to-use controls make it ideal for both professional and DIY enthusiasts. Whether you're working on a construction site or simply need to inflate your bike tires, the Solinst 12 volt air compressor is up to the task.

Printed in Canada
September 22, 2017
(#109484)
12 Volt Compressor Assembly Replacement
For further information contact: Solinst Canada Ltd.
Fax: +1 (905) 873-1992; (800) 516-9081 Tel: +1 (905) 873-2255; (800) 661-2023
35 Todd Road, Georgetown, Ontario Canada L7G 4R8
Web Site: www.solinst.com E-mail: [email protected]
Tools and Materials Needed
1. 12 Volt Compressor Assembly (#109483)
2. 9/16" Wrench
3. 3/8" Wrench
4. 3/16" Allen Key
5. Wire Cutters and Strippers, if required
6. Pliers or Crimping Tool, if required
Remove the Old Compressor Assembly
1. Use the 9/16" wrench to undo the 9/16" brass hex (JIC)
and remove the air line from the silver coloured check valve.
Note: Do not over-tighten the air filter when connecting to the new
Compressor Assembly.
Pressure
Switch
12 Volt Compressor Assembly
Connections to the Compressor Unit
Check Valve
9/16"
Brass Hex
(JIC)
Air Line
Black
Wire from
Compressor
Assembly
Air Filter
Red Wire
from
Compressor
Assembly
Instructions
Replacement 12 Volt Compressor Assembly
Connect the New Compressor Assembly
6. Screw the check valve into the output of the new Compressor
Assembly and tighten.
7. If you have an old Compressor Unit, use the pliers or
crimping tool to attach the quick-connect fitting to the
stripped black wire. Connect to the fitting on the black wire
of the new Compressor Assembly.
If you have a newer Compressor Unit, simply connect the
two black wires using the quick-connect fittings.
8. Connect the red wire from the new Compressor Assembly
to the terminal on the pressure switch.
9. Use the three bolts to attach the new Compressor Assembly
to the Compressor Unit frame.
10. Use the 9/16" wrench to connect the air line to the check
valve of the new Compressor Assembly.
3. Pull off the red wire on top of the pressure switch to the old
Compressor Assembly. Leave the adjacent red wire on the
pressure switch.
4. If you have an older Compressor Unit, cut the black wire
of the old Compressor Assembly at a point about 3"
(7.6 cm) away from the old Assembly. Strip the wire about
1/2" (1.25 cm).
If you have a newer Compressor Unit, simply disconnect the
fittings connecting the black wires.
5. Remove the old Compressor Assembly from the Compressor
Unit frame.
Quick-Connect
Fitting
Connects to
top-front of
Pressure Switch
CAUTION: Ensure the power supply is disconnected from the
12V Compressor and the pressure has been fully vented
from the tank.
11. By hand, screw the air filter into the new Compressor
Assembly. Do not over-tighten.
2. Use the 3/8" wrench and 3/16" Allen key to undo and
remove the three bolts holding the Compressor Assembly to
the frame of the Compressor Unit.
Quick-Connect
Fitting for use with
Old Compressors
  • Page 1 1

Solinst 12 volt air compressor Operating instructions

12 volt air compressor
Brand
Solinst
Model
12 volt air compressor
Category
Cable assembly tools
Type
Operating instructions

Solinst 12 volt air compressor is a powerful and versatile tool designed for a wide range of applications. With its ability to deliver high-pressure air, it can inflate tires, power pneumatic tools, and even fill scuba tanks. Its compact design and easy-to-use controls make it ideal for both professional and DIY enthusiasts. Whether you're working on a construction site or simply need to inflate your bike tires, the Solinst 12 volt air compressor is up to the task.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents