2. Schneider Electric
  3. Smart-UPS Modular Ultra

Schneider Electric Smart-UPS Modular Ultra User guide

  • Hello! I've reviewed the Replacement Guide for the Schneider Electric Smart-UPS Modular Ultra Power Distribution Units (PDUs). This document provides instructions on how to safely replace the units, emphasizing the need for a qualified electrician and proper steps before connecting to the AC mains. I am ready to answer any questions you have about the replacement procedure.
  • Who should replace the PDUs?
    What should be done before replacing PDUs?
    What is important before connecting the unit to AC Mains?
Replacement Guide EN 990-6504A – 07/2023
As standards, specifications, and design change
from time to time, please ask for confirmation of the
information given in this publication.
© 2023 Schneider Electric. All rights reserved.
Schneider Electric
35 rue Joseph Monier
92500 Ruel Malmaison - France
Phone: +33 (0) 1 41 29 70 00
www.apc.com
APC™ Smart-UPS™ Modular Ultra
Power Distribution Unit (PDU)
SRYLPD1/SRYLPD2/SRYLPD3/SRYLPD4
NOTE: SRYLPD1 is used for the purpose of illustration. The process is applicable to
SRYLPD2, SRYLPD3, and SRYLPD4.
DANGER
RISK OF ELECTRIC SHOCK
• PDUs should be replaced only by a qualified electrician.
• Switch off the electrical panel circuit breaker before attempting to replace the
PDUs.
• Be sure that either the Power Distribution Unit (PDU) or the PDU blanking panel is
positioned correctly and secured before connecting the unit to AC Mains.
Failure to follow these instructions will result in death or serious injury.
sy10 a42 6
4X
4X
Service Bypass Unit
(SBU) UPS
2
Replacement Guide APC Smart-UPS Modular Ultra Power Distribution Unit (PDU)
EN 990-6504A – 07/2023
SRYLPD5/SRYLPD7
NOTE: SRYLPD5 is used for the purpose of illustration. The process is applicable to
SRYLPD7 also.
sy10373a
4X
4X
Service Bypass Unit
(SBU) UPS
/