CLS Ruby Compact Bracket Owner's manual

Type
Owner's manual

This manual is also suitable for

www.cls-led.com www.cls-led.com
CeilingWallFloor 200 cm 1500 gr 50.000 h1 37º 63º IP20 3000K
CRI>80
2700K
CRI>80
2700K
CRI>92
4000K
CRI>80
4000K
CRI>92
DRIVER
INCLUDED
DRIVER
INTERNAL
200 ~ 240
VAC
1-10V
dimmable
Mains
dimmable
Max.
22 Watt
Max.
30 Watt
3000K
CRI>92
2500K
CRI>80
RGBW
W: (4000K)
1800-400K 2700-6500K 1800-3000K
RGBA
3500K
CRI>92
CLS
DYNAMIC
COLOUR
COB
2
CLS RUBY COMPACT BRACKET SERIESCLS RUBY COMPACT BRACKET SERIES
Manual V1.1 - May 2022
INDEX
CONTENT
SAFETY INFORMATION
Ambiance
Max. 40º
Block access
below the work
area when
maintaining
the unit
Use a source
of AC power
that complies to
local electrical
codes
Disconnect the
power supply
before installing
or maintaining
Don’t install in
a flammable
or explosive
area
Warning!
Some surfaces
can be hot
Do not stare
into the LED
Don’t modify
or install
genuine parts
on this product
Qualified
technician
Make sure all
connectors are
connected
properly
CeilingWallFloor 200 cm 1500 gr 50.000 h19º 37º 63º IP20 3000K
CRI>80
2700K
CRI>80
2700K
CRI>92
4000K
CRI>80
4000K
CRI>92
DRIVER
INCLUDED
DRIVER
INTERNAL
200 ~ 240
VAC
1-10V
dimmable
Mains
dimmable
Max.
22 Watt
Max.
30 Watt
3000K
CRI>92
2500K
CRI>80
RGBW
W: (4000K)
1800-400K 2700-6500K 1800-3000K
RGBA
3500K
CRI>92
CLS
DYNAMIC
COLOUR
COB
Index 2
Safety information 2
Content 2
Technical 3
Specifications 3
Installation 4
Installation DMX version 5
Programming DMX 6
Bluetooth by Casambi 6
Programming table 7
Reflector replacement 8
Accessories 9
List of symbols 10
www.cls-led.com www.cls-led.com
3 4
Tools M10
TECHNICAL
SPECIFICATIONS
LED: High Power LED
Available colours: CRI>80: 2500K, 2700K, 3000K or 4000K
CRI>92: 2700K, 3000K, 3500K or 4000K
Colour Changing: RGBW (W: 4000K) or RGBA
Tunable White: 1800K-4000K or 2700K-6500K
Dim To Warm: 1800K-3000K
Lenses: 19º, 37º, 63º
Power supply: 200 ~ 240 VAC
Power consumption: 6 serie: Max. 30 Watt
Housing: Anodised aluminium black or white coated
Weight: 1500 gr
IP value: IP20
Cable length: 200 centimeters
Measurements: 283 x 123 x 100 mm (hxbxø)
Ambient temperature: -10º C till +40º C
283 mm 232 mm
Ø100 mm
116,6 mm
ø 100 mm
123 mm
ø 10 mm
1
4
2
3
Position
indicator
INSTALLATION
www.cls-led.com www.cls-led.com
65
INSTALLATION DMX
1
4
2
3
Position
indicator
55 core combi cable connection scheme
yellow/green
Brown
Blue
Red
White
- Combi cable = 5 x 0,5 mm2
- See step 6 for the ammount of Ruby’s per switch-on
- Do NOT connect DMX Shield to earth!
6
5 serie - 22 Watt: 25 pieces
6 serie - 30 Watt: 25 pieces
7 serie - 45 Watt: 5 pieces
8 serie - 60 Watt: 5 pieces
9 serie - 110 Watt: 5 pieces
Maximum ammount of Ruby’s per switch-on *
* Due the switch-on peak
Fuse
C16
PROGRAMMING DMX
All settings can be configured via DMX. Settings can be configured at once or separately. When one or a couple settings needs
to be changed just leave all other setting values zero. This keeps those settings unchanged. Please check the table for more
information.
Always use a DMX controller with digital interface. If not available, you can purchase the CLS D-ta DMX addresser unit (#122200).
First make sure to set the DATA on the DMX controller. To program the setting into the LED fixture follow the next steps using a
CLS magnet (#Y106017).
2
* If all LEDs ash 10 times, something went wrong. Please try again. If the problem continues to occur, please contact your local sales distributor.
3
1
Place magnet
on the
indication mark.
The LEDs will
light up
After 2 seconds
The LED’s will ash
3 times
conrming
storage*
BLUETOOTH BY CASAMBI
For Casambi controlled fixtures, see the manual of Casambi. The Manual can be found on our CLS website, in the Downloads section.
Or use the link below:
https://www.cls-led.com/wp-content/uploads/cls-products/CLS_CASAMBI/MANUAL/Manual_Casambi_controlsystem_EN.pdf
2022 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all aliated companies disclaim
liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to
use or reliance on the information contained in this manual. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions, found on the back of
your CLS-LED BV invoice, inside the CLS catalogue or on our website www.cls-led.com/General-Terms.pdf
www.cls-led.com www.cls-led.com
7 8
12
3 4
56
Make sure
the indicated
holes falls over
the clips
78
910
See next page for step 7
REFLECTOR REPLACEMENT
PROGRAMMINGTABLE
DMX
Function
Data
Parameters
Description
CH1
Setaddress
001to255
0
0=nochange
UsethisDMXchanneltosetaddressfrom001to
255.TheconfiguredDMXaddressiscalled“n”
1…255
DMXaddress=1255
CH2
Setaddress
256to508
0
nochange
UsethisDMXchanneltosetaddressfrom256to
508.TheconfiguredDMXaddressiscalled“n”
1…255
DMXaddress=256508
CH3 Static
behavior
0
nochange
IfnoDMXispresentthefixturewillrespondlike
setinthisfunction.
1
lastDMXvalue
2
outputoff
3
loadstaticvalues
CH4 Softdim
0
nochange
SoftdimwillinterpolatebetweentheDMX
values.Thisfunctionmakesthedimcurve
smoother
1
off
2
on
CH5 Master
control
0
nochange
Ifmasterisfirstchannelisselectedthechannel
willbeDMXchannel“n”.Ifmasterislastchannel
isselectedthechannelwillbe“n+x”
(“x”iscalculatedintheoutputpatch).
1
nomasterused
2
masterisfirstchannel
3
masterislastchannel
CH6 Output1
patch
0
nochange
Eachoutputchannelcanbepatchedtorespond
tothedesiredDMXchannel.Thisenablesthe
usertomixupthecoloursaccordingtothe
controllerthatisused.
Example:alloutputsarepatchedas1
AlloutputswillbecontrolledbyDMXchannel
“n”.IfmasterisusedtotalDMXchannelswillbe2
otherwiseituses1channel(“x”=1).
Example:output1&2arepatchedas1and3&4
arepatchedas2
Output1&2willbecontrolledbyDMXchannel
“n”.
Output3&4willbecontrolledbyDMXchannel
“n+1”.
IfmasterisusedtotalDMXchannelswillbe3
otherwiseituses2channels(“x”=2).
1
DMXchanneln
2
DMXchanneln+1
3
DMXchanneln+2
4
DMXchanneln+3
CH7Output2
patch
0
nochange
1
DMXchanneln
2
DMXchanneln+1
3
DMXchanneln+2
4
DMXchanneln+3
CH8 Output3
patch
0
nochange
1
DMXchanneln
2
DMXchanneln+1
3
DMXchanneln+2
4
DMXchanneln+3
CH9Output4
patch
0
nochange
1
DMXchanneln
2
DMXchanneln+1
3
DMXchanneln+2
4
DMXchanneln+3
CH10Staticoutput
1
0
nochange
Eachoutputchannelcanbesettoanstatic
intensity.
IfnoDMXispresentandStaticbehaviorissetto
“loadstaticvalues”.Theoutputswillbesettothe
configuredintensityvalues.
1
outputoff
2…255
intensity2255
CH11Staticoutput
2
0
nochange
1
outputoff
2…255
intensity2255
CH12Staticoutput
3
0
nochange
1
outputoff
2…255
intensity2255
CH13Staticoutput
4
0
nochange
1
outputoff
2…255
intensity2255
CH14Loaddefault
settings
0
nochange
ThisfunctionresetsallsettingstotheFactory
setting.CheckFactorysettingtable.
X
LoadFactorysettings.Xisrow
numberfactorysettingtable.
* Not applicable on the Ruby Bracket DMX single colour
*
*
*
*
*
*
*
PROGRAMMING TABLE
www.cls-led.com www.cls-led.com
9 10
78
910
LIST OF SYMBOLS
Multiple connection
Daisychain connectivity
Installation depth
In centimeters
Swivel
Fixture is horizontally rotatable,
indicated in degrees
Swivel
Fixture is vertically rotatable,
indicated in degrees
Installation size
In centimeters
Application area
Indoor or outdoor
Application area
Floor, wall or ceiling
Protection class
One, two or three
Cable length
Maximum cable attached
to the fixture in centimeters
Lifespan
Of the light source in hours
Driver
Inclusive or exclusive
Internal or external
Pressure
Maximum pressure on the
fixture in kg/cm2
Weight
In grams/kilograms
Curve
Minimal bending curve
in centimeters
LED pitch
Pitch between the LEDs
in millimeters
Power supply
In VDC, VAC or milliAmpere
Power consumption
In VA or Watt
IP value
Ingress Protection classifies the
degrees of protection provided against
the intrusion of the product
Cutting length
Indicated by the cutting
marks
LEDs
Kind of LED used in the
fixture
Lenses
Availble lenses,
indicated in degrees
Performance Zoom
Adjustable beam angle
Plug & play
Easy connection using the
SmartConnect system
White colour temperature
In dierent Kelvin values;
Cold white, neutral white, warm
white or extra warm white
Colour
Available colours;
Amber, blue, red or green
Colour changing
RGB, RGB-W, RGB-A,
AWB or Tunable White
DMX input
Fixture works on DMX512
protocol or Wireless DMX
Magno dimming
Accurate dimming from
100 - 1% by using a magnet
Dynamic Control
Dynamic Power Control or
Dynamic Temperature Control
Combined product
Compose your own fixture
Warranty
3 or 5 years warranty on
the product
Energy label
Conformité Européenne
CE marking for free marketability
of industrial goods within the EU
r
h
ø w d
Dimmable
1-10 Volt, Phase, individual,
DMX dimmable or DALI
DRIVER
INCLUDED
DRIVER
EXTERNAL
Retail & Food LED modules
Clothing, furniture, kitchens, jewellery,
shoes, bread, meat, fish and
vegetables & fruit.
Lightsource
Equipped with a CLS, Citizen or a Xicato
LED module
Bluetooth controlled
By Casambi
PWM dimming
Traditional PWM dimming, DMX analog
or DMX Hybrid dim
CLS
DYNAMIC
COLOUR
COB
ACCESSORIES
Y106017 CLS Magnet for programming, 5 pcs
122200 CLS D-ta DMX addresser
www.cls-led.com www.cls-led.com
6 7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

CLS Ruby Compact Bracket Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI