Electro-Voice 834-20 Operating instructions

Type
Operating instructions

Electro-Voice 834-20 is an all solid state monaural FM background music receiver with provisions for paging. It consists of a tuner for the 88-108 MHz FM band and a 20 Watt RMS audio amplifier with a microphone preamplifier. The receiver has a music output and a preamp output jack for connection to an external amplifier as well as a high level phono input jack and a microphone jack which may be switched for either high or low impedance input. The speaker outputs of the receiver are for 4 or 8 ohms; or 25 volt or 70 volt balanced lines.

Electro-Voice 834-20 is an all solid state monaural FM background music receiver with provisions for paging. It consists of a tuner for the 88-108 MHz FM band and a 20 Watt RMS audio amplifier with a microphone preamplifier. The receiver has a music output and a preamp output jack for connection to an external amplifier as well as a high level phono input jack and a microphone jack which may be switched for either high or low impedance input. The speaker outputs of the receiver are for 4 or 8 ohms; or 25 volt or 70 volt balanced lines.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Electro-Voice 834-20 Operating instructions

Type
Operating instructions

Electro-Voice 834-20 is an all solid state monaural FM background music receiver with provisions for paging. It consists of a tuner for the 88-108 MHz FM band and a 20 Watt RMS audio amplifier with a microphone preamplifier. The receiver has a music output and a preamp output jack for connection to an external amplifier as well as a high level phono input jack and a microphone jack which may be switched for either high or low impedance input. The speaker outputs of the receiver are for 4 or 8 ohms; or 25 volt or 70 volt balanced lines.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI