Label Picture Description QTY
A Left Armrest 1
B Right Armrest 1
C Seat 1
Assembly Instructions
Caution: You must read this before you proceed
Dining Chair
Parts List
Noble House Home Furnishings LLC Page 1 OF 6
D Backrest 1
E Seat Cushion 1
Label Picture Description QTY
① Bolt (M6*30MM) 9
② Washer 9
③ Allen Key 1
Before Beginning
Assembly:
Hardware
Assembly Preparation
Noble House Home Furnishings LLC Page 2 OF 6
Step 1
Assembly Steps
Overview
This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Dining Chair parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to familiarise
yourself with the parts and steps before assembly.
①
②
Noble House Home Furnishings LLC Page 3 OF 6
Step 2
Step 3
Open the carton and place all the parts onto a clean, non-marring surface.
1.1 Insert the Dowel on the Backrest(D) into the mounting position of the Left
Armrest(A).
1.2 Atach Backrest(D) to Left Armrest(A) using Bolts(①) and Washers(②) with Allen
Key(③) as shown in the picture.
Do not fully tighten the Bolts.
Occasionally some of the PE Wicker shifts and covers the mounting positions
preventing easy assembly. The PE Wicker should never be cut, but moved away
from the mounting positions.
2.1 Align Seat(C) with Left Armrest(A) and Backrest(D).
2.2 Attach Seat(C) to Left Armrest(A) and Backrest(D) using Bolts(①) and
Washers(②) with Allen Key(③) as pictured.
Do not fully tighten the Bolts.
①
②
①
②
①
②
Step 3.1
Step 3.2
Noble House Home Furnishings LLC Page 4 OF 6
Step 4
Align Right Armrest(B) to Backrest(D) and Seat(C).
3.1 Insert the Dowel on the Backrest(D) into the mounting position of the Right
Armrest(B).
3.2 Attach Right Armrest(B) to Backrest(D) and Seat(C) using Bolts(①) and
Washers(②) with Allen Key(③) as shown in the picture.
Stand the Chair up.
Exert pressure floorwards, onto the Chair with both your hands.
This pressure will help the Chair reach full alignments status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Bolts and Screws in a sequential
manner, until evenly secured.
When tightening the Bolts and Screws sequentially.
DO NOT tighten any Bolt or Screw fully and then move on towards the next one.
If there are still wobbles, loosen the Bolts and Screws and excute the same
above process.
If the Chair is not stable it could lead to damage to the product.
Put the Seat Cushion(E) on the Chair.
Your Dining Chair is ready for use.
This Dining Chair can only be used on the flat, level surface.
Noble House Home Furnishings LLC Page 5 OF 6
Questions & Answers about Proposition 65
• What is Proposition 65?
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to
chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the
products that Californians purchase, in their homes or workplaces, or that are released into the
environment. By requiring that this information be provided, Proposition 65 enables Californians to
make informed decisions about their exposures to these chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of
listed chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or
other reproductive harm. This list, which must be updated at least once a year, has grown to include
approximately 900 chemicals since it was first published in 1987.
• What types of chemicals are on the Proposition 65 list?
The list contains a wide range of naturally occurring and synthetic chemicals that include additives or
ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed
chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical
processes, such as motor vehicle exhaust.
• What does a warning mean?
If a warning is placed on a product label or posted or distributed at a workplace, a business, or in rental
housing, the business issuing the warning is aware or believes that it is exposing individuals to one or
more listed chemicals.
By law, a warning must be given for listed chemicals unless the exposure is low enough to pose no
significant risk of cancer or is significantly below levels observed to cause birth defects or other
reproductive harm.
• Where can I get more information on Proposition 65?
If you have specific questions on the administration or implementation of Proposition 65, you can
contact OEHHA's Proposition 65 program at P65.Questions@oehha.ca.gov, or by phone at (916) 445-
6900.
Do not clean furniture with harsh cleansers or polish.
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Children should not climb or jump on the furniture.
Keep away from sources of ignition.
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Children should not climb or jump on the furniture.
Keep away from sources of ignition.
Noble House Home Furnishings LLC Page 6 OF 6
Label Picture Description QTY
Assembly Instructions
Caution: You must read this before you proceed
Table
Caution: This Table is NOT a TOY
Keep your child/ children at bay during the assembly process.
Whenever moving/lifting the Table and to prevent damage to the Table, two
adults are needed to execute these actions.
Parts List
A
Table Top
1
B First Leg 1
C Second Leg 1
D Third Leg 1
Label Picture Description QTY
①
Bolt
(M8x50mm)
5
Hardware
Noble House Home Furnishings LLC
②
Bolt
(M6x110mm)
2
③
Screw
(M6x25mm)
3
④
Sleeve Nut
2
⑤
Allen Key
2
Before Beginning Assembly:
Assembly Preparation
Noble House Home Furnishings LLC
Assembly Steps
Overview
This Table has multiple parts and may require up to 30 minutes to assemble. To give you
an overview of the Table parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Third Leg (D)
Second Leg (C)
First Leg (B)
Table Top (A)
Noble House Home Furnishings LLC
Step 2
2.1) Insert Second Leg(C) and Third Leg(D) through the First Leg(B) as shown above.
2.2) Attach Second Leg(C) to Third Leg(D) using Screws(③) with Allen Key(⑤).
Do not fully tighten the Screws.
Step 1
Unpack and place all parts on a clean, non-marring surface.
D
B
C
3
5
2.2
2.1
Noble House Home Furnishings LLC
Attach Leg Frame to the Table Top(A) using Bolts(①) with Allen Key(⑤).
Do not fully tighten the Bolts.
Step 3
Then, attach First Leg(B) to Second Leg(C) and Third Leg(D) using Bolt(②) and
Sleeve(④) with Allen Keys(⑤).
Do not fully tighten the Bolt.
Step 4
5
2
4
5
5
1
A
B
C
D
Noble House Home Furnishings LLC
Step 5
Stand the Table up, with assistance from your partner.
EXERT pressure, floorwards, onto the Table.
This pressure will help the Legs and Table Top reach alignment at all joints.
Check for wobbles on a level surface.
If no wobbles are found, a sequential manner, gradually tighten all Bolts and Screws until
evenly secured.
When tightening the Bolts and Screws tighten sequentially.
Do not tighten any Bolt or Screw fully and then move on towards the next one. This
could cause the frame to warp.
If there are still wobbles, loosen the Bolts and Screws and excute the same process.
If the Table is not Stable it could lead to damage to the product.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Step 6
Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
Noble House Home Furnishings LLC
Page is loading ...
Page is loading ...
/
