Zebra MX101 Owner's manual

The MX101 identification label included in the MX101 packaging must be affixed to the

MP6000 as shown below. Failure to affix the label to the MP6000 voids the MX101

warranty.

1. Peel the label from its backing.

1. Affix the label to the indentation under the MP6000 platter.

xxxxxxxxxx

MP6000 View

Under Platter

xxxxxxxxxx

MN000049A02 Revision A - January 2015

Zebra Technologies Corporation, Lincolnshire, IL U.S.A., http://www.zebra.com

Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered trademark

of Symbol Technologies, Inc., a Zebra Technologies company.

MX101

IDENTIFICATION LABEL