Kichler Lighting 44377BK is a versatile and stylish lighting fixture that can elevate the ambiance of any room. With its adjustable arms, it can be customized to suit your specific lighting needs. The fixture comes with a mounting strap, screws, and a canopy for easy installation. It also includes a chain that allows you to adjust the height of the fixture to your preference. The fixture is compatible with a variety of bulb types, including incandescent, LED, and CFL, so you can choose the bulbs that best suit your needs.
Kichler Lighting 44377BK is a versatile and stylish lighting fixture that can elevate the ambiance of any room. With its adjustable arms, it can be customized to suit your specific lighting needs. The fixture comes with a mounting strap, screws, and a canopy for easy installation. It also includes a chain that allows you to adjust the height of the fixture to your preference. The fixture is compatible with a variety of bulb types, including incandescent, LED, and CFL, so you can choose the bulbs that best suit your needs.
IS-44377-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
6) Aer desired posion is found, ghten both top and
boom hexnuts up against the boom and top of the
mounng strap.
7) Slip canopy over screw collar loop and thread on threaded
ring. Aach chain[I] (open one link[H]) to boom of
screw collar loop. Unscrew threaded ring, let canopy and
threaded ring slip down.
8) Adjust chain to desired length by removing chain links and
aach chain to xture with one open link[H], close the
open links by wrapping with a towel and squeezing closed
using pliers.
9) Weave electrical wire and ground wire through chain[I]
no more than 3 inches apart. Pass wire through threaded
ring[F], canopy, screw collar loop, threaded pipe and into
outlet box.
10) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
11) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
12) Raise canopy to ceiling.
13) Secure canopy in place by ghtening threaded ring onto
screw collar loop.
14) Rotate the arms to their correct posion.
15) Take the small lower ring[K] and place into the lower
center of the arms by gently moving the arms apart to
enable the ring to go onto the studs.
16) Take the glass[L] and place onto the sockets as shown.
17) Take the glass retainers[M] and thread down over the
sockets in the glass to secure the glass.
18) Install the recommended bulbs (not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
[A] Threaded
Pipe
[B] Screw Collar
Loop
[C] Hexnut
[D] Mounting
Strap
[E] Outlet Box
[F] Threaded
Ring
[G] Canopy
[H] Chain Link
[I] Chain
[J] Large Loop
[K] Small Lower
Ring
[L] Glass
[M] Glass
Retainers
[N] Strap
Mounting
Screws
[O] Main Body
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
1) Take the large loop[J] and run the wires through its
center and thread onto the main body[O].
2) Take threaded pipe[A] from parts bag and screw in screw
collar loop[B] a minimum of 6 mm (1/4”). Lock into place
with hexnut[C].
3) Run another hexnut down threaded pipe almost touching
rst hexnut. Now screw threaded pipe into mounng
strap[D]. Mounng strap must be posioned with
extruded thread faced into outlet box[E]. Threaded pipe
must protrude out the back of mounng strap. Screw
third hexnut onto end of threaded pipe protruding from
back of mounng strap.
4) Connect mounng strap[D] to outlet box using the strap
mounng screws[N].
5) Unscrew the threaded ring[F] from screw collar loop. Take
canopy[G] and pass over screw collar loop. Approximately
one half of the screw collar loop exterior threads should
be exposed. Adjust screw collar loop by turning assembly
up or down in mounng strap. Remove canopy.
Installaon Instrucons (connued)
E
D
C
N
A
G
B
F
I
H
H
J
K
O
L
M
Page is loading ...
IS-44377-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
6) Aer desired posion is found, ghten both top and
boom hexnuts up against the boom and top of the
mounng strap.
7) Slip canopy over screw collar loop and thread on threaded
ring. Aach chain[I] (open one link[H]) to boom of
screw collar loop. Unscrew threaded ring, let canopy and
threaded ring slip down.
8) Adjust chain to desired length by removing chain links and
aach chain to xture with one open link[H], close the
open links by wrapping with a towel and squeezing closed
using pliers.
9) Weave electrical wire and ground wire through chain[I]
no more than 3 inches apart. Pass wire through threaded
ring[F], canopy, screw collar loop, threaded pipe and into
outlet box.
10) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector aer following the above steps. Never connect
ground wire to black or white power supply wires.
11) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
12) Raise canopy to ceiling.
13) Secure canopy in place by ghtening threaded ring onto
screw collar loop.
14) Rotate the arms to their correct posion.
15) Take the small lower ring[K] and place into the lower
center of the arms by gently moving the arms apart to
enable the ring to go onto the studs.
16) Take the glass[L] and place onto the sockets as shown.
17) Take the glass retainers[M] and thread down over the
sockets in the glass to secure the glass.
18) Install the recommended bulbs (not supplied).
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
[A] Threaded
Pipe
[B] Screw Collar
Loop
[C] Hexnut
[D] Mounting
Strap
[E] Outlet Box
[F] Threaded
Ring
[G] Canopy
[H] Chain Link
[I] Chain
[J] Large Loop
[K] Small Lower
Ring
[L] Glass
[M] Glass
Retainers
[N] Strap
Mounting
Screws
[O] Main Body
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
1) Take the large loop[J] and run the wires through its
center and thread onto the main body[O].
2) Take threaded pipe[A] from parts bag and screw in screw
collar loop[B] a minimum of 6 mm (1/4”). Lock into place
with hexnut[C].
3) Run another hexnut down threaded pipe almost touching
rst hexnut. Now screw threaded pipe into mounng
strap[D]. Mounng strap must be posioned with
extruded thread faced into outlet box[E]. Threaded pipe
must protrude out the back of mounng strap. Screw
third hexnut onto end of threaded pipe protruding from
back of mounng strap.
4) Connect mounng strap[D] to outlet box using the strap
mounng screws[N].
5) Unscrew the threaded ring[F] from screw collar loop. Take
canopy[G] and pass over screw collar loop. Approximately
one half of the screw collar loop exterior threads should
be exposed. Adjust screw collar loop by turning assembly
up or down in mounng strap. Remove canopy.
Installaon Instrucons (connued)
E
D
C
N
A
G
B
F
I
H
H
J
K
O
L
M
Page is loading ...
-
1
-
2
-
3
-
4
Kichler Lighting 44377BK is a versatile and stylish lighting fixture that can elevate the ambiance of any room. With its adjustable arms, it can be customized to suit your specific lighting needs. The fixture comes with a mounting strap, screws, and a canopy for easy installation. It also includes a chain that allows you to adjust the height of the fixture to your preference. The fixture is compatible with a variety of bulb types, including incandescent, LED, and CFL, so you can choose the bulbs that best suit your needs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Kichler Lighting 43984BK User manual
-
Kichler Lighting 42992OZLED User manual
-
Kichler Lighting 42992OZLED User manual
-
Kichler Lighting 2021NI User manual
-
Kichler Lighting 44036NI User manual
-
Kichler Lighting 2031NI User manual
-
Kichler Lighting 49988DBK User manual
-
Kichler Lighting 44262AVI User manual
-
Kichler Lighting 44378BK User manual
-
Kichler Lighting 44034NI User manual
Other documents
-
Thomas Lighting TN-6589 Installation guide
-
Filament Design CLI-TL5000163 Installation guide
-
Home Decorators Collection 9401010820 Operating instructions
-
Kichler 59008WZC Operating instructions
-
-
-
Bel Air Lighting 70528-1 ROB Installation guide
-
-
-