Home Decorators Collection 9402510820 Installation guide

Type
Installation guide

This manual is also suitable for

Home Decorators Collection 9402510820 is a pendant light fixture that can be used to add style and illumination to any room. The fixture is easy to install and comes with all the necessary hardware. The fixture can be used with a variety of different light bulbs, so you can customize the amount of light that is emitted. The fixture is also dimmable, so you can create the perfect ambiance for any occasion.

Home Decorators Collection 9402510820 is a pendant light fixture that can be used to add style and illumination to any room. The fixture is easy to install and comes with all the necessary hardware. The fixture can be used with a variety of different light bulbs, so you can customize the amount of light that is emitted. The fixture is also dimmable, so you can create the perfect ambiance for any occasion.

QQuueessttiioonnss,, pprroobblleemmss,, mmiissssiinngg ppaarrttss?? Before returning to your retailer, call our customer
service department
at 1-866-384-9400, 9 a.m.-5 p.m., EST, Monday-Friday . Include
e-mail address
if applicable .
Part
Description
Quantity
A
1
B
C
D
2
3
1
Mounting Strap
Mounting Screws
Wire Nut
Threaded Nipple
Style and finish will vary by item.
DDAA
E
1
Hexnut
PACKAGE CONTENTS
Pendant Lig Installationht
1
F
1
G
H
I
1
1
1
Lock Washer
Collar Loop
Canopy
Collar Ring
J
1
Chain
K
1
L
1
Loop
Socket Cup
Outlet Box
Fixture
G
round
Wi
re
Supply
Wir
e
Canopy
Chain
Ground Wi
re
Fixtu
re
Wi
r
e
Loop
Collar Ring
G
round Sc
rew
Collar Loop
Lock
Washer
Hexnut
Mounting Sc
rew
Th
readed Nipple
Mounting Strap
Supply
G
round W
i
r
e
Wire Nut
(A)
(C)
(B)
(D)
(H)
(I)
(J)
(K)
(E)
(F)
(G)
M
1
N
1
Socket Ring
Glass Shade
(L)
FF
Medium Base (PKW or PBW) Pendant
(M)
(N)
(I)
I
1
Metal Ring
1 . Disconnect power at main electrical panel
befo
re installation.
2. Attach mounting strap(A) to outlet box using
Mounting sc
rews(B) provided with outlet box.
3 . Screw threaded nipple(D) into collar loop(G) as far
as it will go. Secu
re with lock washer(F) and
hexnut(E).
4 . Screw threaded nipple(E) into mounting strap(A)
app
roximately 1/2 inch. Adjust height of
collar loop(G)by temporarily holding
canopy(H) in place against ceiling with collar
loop(G) extending downwa
rd through hole in
canopy.
5. Use pliers to open one end link of the chain(J)
and attach to loop(K) on fixtu
re. Close link.
Thread fixture wire through chainlinks,
weaving wi
re through every second link.
6
. Pull ends of chain(J) and wi
res through collar
ring(I) and canopy(J)
.
7. Use pliers to open the other end link of chain(J)
and attach to collar loop(G). Close link.
8. Pass ends of fixture wires through center
hole of collar loop(G), th
readed nipple(D) and
mounting strap(A).
9. Thread Loop (K) onto top of Socket Cup
& Fixture Assembly
10
.
11
.
Posi on Shade (N) into socket cup (L) and then secure with Socket
R
ing ( M
)
.
A er installa on, thread bulb into socket. Use suitable
w
a age as indicated on label.
(L)
Fig. A
Grounding Detail
Connect Black or Red
House Wire to:
Black
Parallel cord - SP
T l & ll
(round & smooth )
Clea
r, Brown, Gold or
Black (without tracer)
Insulated Wire
(Other than GREEN)
with copper conductor
Connect White
House Wire to:
White
Parallel cord - SP
T l & ll
(square & ridged )
Clea
r, Brown, Gold or
Black (with tracer)
Insulated Wire
(Other than GREEN)
with silver conductor
Black or Smooth
Fixture Wire
Black
Supply Wire
White or Ribbed
Fixture Wire
White Supply Wire
Fixture
Ground Wire
Green
Ground
Screw
Dimples
Outlet Box
Ground Wire
Wiring
(see Fig A.)
1. Split the conductors of the fixture wire about 4 inches.
Being c
areful not to expose any of the wire inside of the
insulatio
n.
2. Connect the fixture ground wire to the outlet box ground
w
ire using wirenut(C)(not provided).Connect outlet box ground
w
ire to mounting strap(A) with Green hex-head ground
s
crew to tapped hole in mounting strap marked “GND”.
3. Connect the half of the fixture wire that is white, marked or
has a ribbed surface to the outlet box supply w
ire (WHITE).
Connect the other half of the fixt
ure wire that is black,
unmarked, or has a smooth surface to the outlet b
ox
supply w
ire (BLACK or RED). Use wirenuts provided.
4. Spread the electrical splices so that the black wire is on one
side of the outlet box and the white w
ire is on the other side.
5 . Slide canopy(H) up into place against ceiling.
Slide collar ring(I) up and t
hread onto collar loop(G) to secure
canopy(H) in place.
NOTE: Make sure chain supports the weight of the light fixture
and no weight is on either the supply or
ground wires.
,
As t
to
  • Page 1 1
  • Page 2 2

Home Decorators Collection 9402510820 Installation guide

Type
Installation guide
This manual is also suitable for

Home Decorators Collection 9402510820 is a pendant light fixture that can be used to add style and illumination to any room. The fixture is easy to install and comes with all the necessary hardware. The fixture can be used with a variety of different light bulbs, so you can customize the amount of light that is emitted. The fixture is also dimmable, so you can create the perfect ambiance for any occasion.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI