Bathworks EZPZ-01 User manual

Brand
Bathworks
Model
EZPZ-01
Type
User manual

This manual is also suitable for

Bathworks EZPZ-01 is an etching kit designed to prepare surfaces for refinishing. It can be used on bathtubs, tiles, wall surrounds, and sinks. The kit includes 16 ounces of EZ Etch, four latex gloves, a scrubby pad, and step-by-step instructions.

To use the EZPZ-01, simply pour the entire container of EZ Etch into the center of the surface to be etched. Then, use a sponge to spread the EZ Etch evenly over the entire surface. Let the EZ Etch sit for 20 minutes, then rinse thoroughly with a sponge or scrubby pad. The surface is now ready to be refinished.

Bathworks EZPZ-01 is an etching kit designed to prepare surfaces for refinishing. It can be used on bathtubs, tiles, wall surrounds, and sinks. The kit includes 16 ounces of EZ Etch, four latex gloves, a scrubby pad, and step-by-step instructions.

To use the EZPZ-01, simply pour the entire container of EZ Etch into the center of the surface to be etched. Then, use a sponge to spread the EZ Etch evenly over the entire surface. Let the EZ Etch sit for 20 minutes, then rinse thoroughly with a sponge or scrubby pad. The surface is now ready to be refinished.

EZ Etch Kit - Instruction Manual
Tub, Tile, Wall Surround, & Sink Renishing Kit
Caution: In the following steps proper ventilation, gloves, and eye wear
are recommended. Keep all renishing kit materials and tools away from
children, animals, and anyone sensitive to fumes. Some items in the kit are
ammable andshould be disposed of properly to city or town codes
regulating used paint products. Use all paint products with caution!
* NOTE: Begin the EZ Etch Kit after Step 3 in the Renishing Kit
Instructions Manual
Step 1: Pour the entire container of EZ Etch into the center of the
bathtub. With a sponge spread thoroughly to the entire surface. Let the EZ
Etch sit on the desired surface for 20 minutes.
Step 2: Using a sponge or scrubby pad rinse thoroughly.
* You can now proceed to Step 4 in the BathWorks Renishing Kit
instructions manual.
Supplies Included in Kit:
• 16 0z's of EZ Etch
• Four (4) Latex Gloves
• Scrubby Pad
• Step by Step Instructions
For Recommended Tools & Supplies Visit:
http://www.bathtubrenishingkit.net/Category/Accessories
Limited Warranty: Tub Renishing, Inc. DBA Munro Products or
Munro Bath Systems as follows; this warranty is in lieu of all other written
or unwritten, expressed or implied warranties, and Tub Renishing, Inc.
DBA Munro Products or Munro Bath Systems expressly disclaims any
warranty of merchantability or tness for a particular purpose. The buyer
assumes all risks whatsoever as to the use of the material. Keep away from
children, animals, or persons that are sensitive to paint or fumes. Fumes
can be harmful to humans and animals, and can also be ammable.
Safety: A protective respirator can be worn if available. Use product
with adequate ventilation. Always use rubber gloves.
Tub Renishing, Inc., DBA Munro Products or Munro Bath Systems, is not
responsible for accidents or misuse of these products or parts and
materials of this kit. Safety is in the hands of the user. If you are unsure
about the use or safety of this product please return the unopened and
unused kits to the supplier. Do not return goods without receiving a
Return Materials Authorization (RMA) number from Munro Products. All
returned goods are at the purchasers cost. Opened or used materials will
be refused for credit. See all MSDS Sheets which are provided and are also
available via our websites. http://www.bathtubrenishingkit.net
Suitability for use: The user is responsible for establishing that these
products are suitable for the user’s application and that all requirements
for meeting approvals, standards, codes, disposal, use and regulations of
any kind are satised. Distributor denies any responsibility for establishing
suitability of use; where, when, and how the materials from this kit are
used. Read all information and instruction before use of this product. Use
Caution!
Tub Renishing, Inc. DBA Munro Products, Munro Bath Systems, and
BathWorks™. BathWorks™ is an exclusive trademark of this company.
For Emergency: CHEMTREC® 1-800-424-9300
  • Page 1 1

Bathworks EZPZ-01 User manual

Brand
Bathworks
Model
EZPZ-01
Type
User manual
This manual is also suitable for

Bathworks EZPZ-01 is an etching kit designed to prepare surfaces for refinishing. It can be used on bathtubs, tiles, wall surrounds, and sinks. The kit includes 16 ounces of EZ Etch, four latex gloves, a scrubby pad, and step-by-step instructions.

To use the EZPZ-01, simply pour the entire container of EZ Etch into the center of the surface to be etched. Then, use a sponge to spread the EZ Etch evenly over the entire surface. Let the EZ Etch sit for 20 minutes, then rinse thoroughly with a sponge or scrubby pad. The surface is now ready to be refinished.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents