Homely Center 1*BROOMHOLDER Installation guide

Hello! I am an AI chatbot trained to assist you with the Homely Center 1*BROOMHOLDER Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

WALL STUD INSTALLATION

STEP 1: LOCATE A STUD USING

STUD-FINDER TOOL

STEP 2: MARK THE STUD

STEP 5: INSTALL 2 CENTER

DRYWALL ANCHORS

STEP 4: DRILL ALL 4 ENTRY

HOLES

STEP 3: ALIGN BROOM HOLDER

TO THE MARKED HOLE AND

MARK ALL OTHER HOLES

STEP 6: INSTALL THE BROOM

HOLDER WITH THE SCREWS

AND SCREW COVERS

INSTALL ON DRYWALL

STEP 4: INSTALL THE BROOM HOLDER WITH THE

SCREWS AND SCREW COVERS

STEP 1: USE THE PRODUCT TO

MARK ALL 4 HOLES

STEP 2: DRILL HOLES ON THE

MARKED POINTS

STEP 3: HAMMER IN THE

DRYWALL ANCHORS

INSTALL ON OTHER

STEP 1: CLEAN THE SURFACE

WHERE THE ADHESIVE WILL BE

APPLIED

STEP 4: STICK THE ADHESIVE

PARALLEL TO THE LEVEL LINE

STEP 5: REMOVE THE THINNER

BACKING

STEP 6: ATTACH THE BROOM

AND MOP HOLDER AND WAIT

48 HOURS BEFORE USING

STEP 3: REMOVE THE THICK

BACKING FROM THE ADHESIVE

STRIP

STEP 2: DRAW A LEVEL LINE AT

THE LOCATION OF

INSTALLATION

NOTE: ONLY USE WHEN HARDWARE IS INAPPLICABLE (IE. ON CERAMIC TILES).

RECOMMENDED FOR LIGHTER ITEMS ONLY. ADHESIVE HAS A SMALLER HOLDING

CAPACITY THAN HARDWARE.

/

Other documents