DAVIS 3200, WindTrak Light (3200) Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the DAVIS 3200 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
#3200
Illuminates WindTrak wind indicators for
perfect night sailing
RUGGED LED BULB
Low current draw of less than 25 milliamps at
12 volts.
EASY TO MOUNT
Use with WindTrak 10, WindTrak 15, or J-Base
mounting sockets.
TRUE WHITE LIGHT
Non-dazzling LED provides just enough lumens to
light up WindTrak tabs and reectors.
WATERPROOF
Lens and body t together tightly. Metal parts are
non-corrosive silver.
Davis Instruments
3465 Diablo Avenue, Hayward, CA 94545 U.S.A.
www.davisinstruments.com
WindTrak Light with WindTrak 15 (#3150).
Mounts directly on the threaded part of the
mounting sockets.
This state-of-the-art LED bulb is polarized.
Be sure to follow the correct polarity.
Replacement Bulb
Buy a white surface mount LED,
Edison 10 mm (0.4") diameter base.
30 watt, 12 volt, 0.1 amp.
WindTrak Light with WindTrak 10 (#3120) or
J-Base mounting sockets (#3125, #3155).
Use 1/4” at washer (not included) for
mounting to J-Base.
03330.011, Rev. A November 2020
/