Vivo PEX-M12-8, PEX-M12-10, PEX-M12-2, PEX-M12-3, PEX-M12-4, PEX-M12-5, PEX-M12-6, PEX-M12-7, PEX-M12-9 Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Vivo PEX-M12-8 Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Pex Manifold
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/search?q=PEX%20M12
[email protected]om www.vivo-us.com 309-278-5303
2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
3
STEP 4
Repeat steps 2 and 3 on each
loop until it is finished.
SPECIFICATIONS and INSTALLATION
STEP 2
Connect tubing using Rifeng
Compression fittings.
STEP 3
Tighten the compression nut with
a wrench.
STEP 1
Attach ball valves and air release
valves to the ends of the manifold
and tighten with a wrench. The
valves are able to fit to either end
as needed.
4
FLOW METER OPERATION
STEP 1
Standing position.
STEP 2
Remove the red cap.
5
STEP 3
Turn knob counter-clockwise to
increase flow.
STEP 4
Turn knob clockwise to decrease
flow.
6
STEP 5
Click the red cap into locked
position.
STEP 6
Standing position.
7
Do not turn the top cup for flow rate adjustment. Turn the knob
counter-clockwise no more than three rounds aer the flow meter has
been fully opened.
WARNING!
Flow can be determined by the position of the buoyant. In this example,
the loop has a flow rate of 2L/min (0.53G/min).
LAST UPDATED: 09/18/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M
/