superbrightleds CLCCT-SW3B12-BC User manual

Type
User manual
Selectable CCT Corn Lights
User Manual
Important: Read all instructions prior to installation. CLCCT Series
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 03/14/2022
Specications CCT Select
Safety and Notes
This product should be installed and serviced in accordance with
applicable national, state, and local building and electrical codes.
Remove power from circuit prior to installation. To reduce the risk of
electric shock, ensure that the main power source and circuit breakers
are switched o before performing any installation or wiring procedures.
Ballast bypass required. Bypass ballast, capacitor, and ignitor prior to
corn light bulb installation.
Do not touch corn light bulb when in use or stare directly at corn light
bulb when in use.
Be sure xture socket can support weight of LED corn light bulb
Some EX39 base versions include a safety cable that should be
attached during installation.
Installation
1. Remove power from supply circuit.
2. Remove existing bulb if needed.
3. Bypass existing ballast (as well as any ingitor or capacitor)
if present, making sure to properly cap and loose wires.
Note: Place retrot label on xture when ballast is bypassed
during installation.
4. Install bulb, including safety
cable on models that have
one included.
5. Restore supply power.
Remove lid using a at head
screwdriver to access the CCT
and wattage selection switches.
Model CLCCT Series
IP Rating IP64
Operating Temperature -40°–122° F (-40°–50° C)
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
Bypassed Ballast Installation
L
N
Capacitor
Ignitor LED
lamp
Ballast
CLCCT-SW3B120-SBC-EX39
3000K 4000K 5000K
80W 100W 120W
  • Page 1 1

superbrightleds CLCCT-SW3B12-BC User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI