CTA PAD-TPADM Owner's manual

Universal Tablet and Phone Adjustable Desk Mount

PAD-TPADM

INSTALLATION - MANUAL

CONTENTS: BC

x1 x1

2. Attaching Articulating Arms to Base

INSTALLATION:

1. Attaching Phone Holder to Articulating Arm

3. Attaching Device to Holder Optional. Attaching Adhesive Pads

1A. Rotate in the phone holder

in the articulating arm adapter

until securely tightened.

2A. Slide the articulating arm into the dedicated mount location

on the base. Rotate in screw until moderately tightened with

your hand, no extra tools needed. Repeat to the other side.

3A. Use both hands to extend

the holders. Make sure that your

device size is compatible with

each of the holder.

Stick the (4) adhesives (F) below the base as shown for added

stability as needed.

3B. Insert your device inside the holder

and release it to contract it.

Portrait & Landscape

Adjustability

Tilt

Adjustability

Rotate each holder to the desired orientation. Rotate each joint to create the desired setup.

Base Swivel Adjustability

Rotate to the desired angle. Securely tighten the

bottom screw to create a more fixed setup.

Cable Management

Use hooks to route cable out of the way.