WURM Frida Service Operating instructions

Frida app

Information for installation / licence

Frida-App_Vx.x_IA_2017-04_EN Subject to technical changes Page 1 of 1

The most important service functions of FRIGODATA XP are made available

through the practical app Frida. All the devices connected to the CAN bus are

clearly represented in a structured device tree. Parameter sets can be quickly

called up using the convenient navigation and adjustable values can be changed.

A demo version is available free of charge in the App Store or Google Play™

Store.

The two following QR Codes enable you to download a demo version of Frida

quickly and easily.

Frida for IOS® Frida for Android™

Frida depends of the respective licence and is available in the versions Frida Service Basic and Frida Service

Abo.

Scope of functions Frida Service Basic

 Connection established via Bluetooth® Low Energy (BLE), CAN-AP required in the project

 Can create and edit up to 5 projects

 OneID use is required

 No COM/DATA-CENTER

Scope of functions Frida Service Abo

 Connection established via BLE and Internet

 Can create and edit unlimited projects

 OneID use is required

 Access to COM-CENTER: enables mobile, secure communication with all LAN-enabled plants

 Access to DATA-CENTER: enables access to all projects while on the go, including the download of all

master data and protocols, and a search for nearby plants

 The Frida Service Abo version can be used for one year

The respective licences are available at your sales department, the licences will be activated via the security

center using the OneID procedure. OneID serves in this case as a licence transfer of the app Frida. You can find

more details at https://registeroneid.wurm.de/.

When your licence has been confirmed by your sales partner you have to restart the app Frida or to check in the

settings of Frida the licence.

All trademarks hereby referenced are the property of their respective owners.