Signia StreamLine Mic User guide

StreamLine Mic

User Guide

2

Content

Before you art 5

Introduction 5

Included in package 10

Components 12

Getting arted 14

Charging 14

Pairing hearing inruments 17

Pairing your smartphone or music player 19

Clear pairings 21

3

Daily use 22

Turning on/o 22

Adjuing the volume 23

Muting the hearing inrument microphones 24

➊ Making phone calls 25

➋ Liening to music 29

➌ Using as remote microphone 31

➍ Using as remote control 34

Important safety information 35

Personal safety 35

Product safety 41

4

Important information 44

Intended use 44

Status and power indicator overview 45

Explanation of symbols 49

Maintenance and care 51

Technical information 52

Disposal information 54

Conformance information 55

5

Before you art

CAUTION

Read this user guide thoroughly and completely and

follow the safety information in this document to avoid

damage or injury.

Introduction

StreamLine Mic uses Bluetooth®* technology to provide the

following functions.

* The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any

use of such marks by the legal manufacturer of this product is under licenses. Other

trademarks and trade names are those of their respective owners.

6

➊ Headset for smartphones

Sounds from your smartphone

will be reamed to your

hearing inruments through

StreamLine Mic.

Your voice is picked up by

StreamLine Mic and sent to

your smartphone.

Read more in section

"Using as remote microphone".

9

➍ Remote control

When StreamLine Mic is not reaming sound it can be used

as a remote control for your hearing inruments.

Read more in section "Using as remote control".

10

Included in package

➊ StreamLine Mic

➋ Lanyards (dierent lengths)

➌ Pouch

➍ USB cable for charging

➎ USB power cable and power plug (country‑specic)

11

➊ ➋ ➌

➍➎

12

Components

➊ Microphones

➋ Power indicator

➌ Status indicator

➍ Clip (rotating)

➎ Multi-function button

➏ Volume buttons and

➐ USB port for charging

13

➏

➐

➎

➍

➌

➋

➊

14

Getting arted

Charging

StreamLine Mic is partly charged on delivery. Charge it fully

before r use.

When the power indicator is red you have approximately

30 minutes remaining reaming time.

➊

➋

15

The power indicator shows the charging atus:

Description

Red Battery is low

Flashing green Charging (StreamLine Mic is on)

Flashing orange Charging (StreamLine Mic is o)

Green fades o Charging is completed (StreamLine Mic is on)

Orange Charging is completed (StreamLine Mic is o)

Further information:

● Typically, a full charge takes 2 hours.

● Make sure that the power plug is easily accessible to

remove it from power supply if necessary.

16

NOTICE

XWhen charging, the charging indicator should be

lit as described in this user guide. If the charging

indicator is not lit, disconnect the device from

the charger and consult your Hearing Care

Professional.

NOTICE

XWhen charging StreamLine Mic use the supplied

original power supply 5.0 V/1A, CE and safety

marked.

17

Pairing hearing inruments

Your hearing inruments need to be paired once with

StreamLine Mic. After that, the pairing is saved in the

hearing inruments and remembered each time they are

turned on.

XEnsure that StreamLine Mic is o: Hold down the

button until the power indicator is o. This takes

approximately 6 seconds.

XTurn the hearing inruments o and on again:

Open and close the battery compartments. If your

hearing inruments do not have a battery compartment,

turn them o and on as described in the hearing

inrument's user guide.

18

The hearing inruments are now ready for pairing. You

have 3 minutes to complete the pairing.

XTurn on StreamLine Mic: Hold down the button until

the power indicator is green. This takes approximately

3 seconds.

The atus indicator ashes yellow.

XPlace both hearing inruments

close to StreamLine Mic (maximum

diance 20 cm or 8 inch). The

pairing process arts automatically.

Pairing is nished when the atus

indicator is yellow.

19

Pairing your smartphone or music player

Your smartphone (or music player) needs to be paired

once with StreamLine Mic. After that, the connection is

automatically eablished when StreamLine Mic is turned on

and within operating diance.

XHold down the and the button simultaneously

until the atus indicator ashes blue. This takes

approximately 6 seconds.

StreamLine Mic is now ready for pairing. You have

3 minutes to complete the pairing.

XSet your smartphone or music player to "search for other

Bluetooth devices". Refer to the device's manual.

XOn your smartphone or music player, select

"StreamLine Mic" from the li of detected devices.

20

X

If requeed, enter the PIN "0000".

Pairing is nished when the atus indicator is blue.

Further information

● StreamLine Mic can be paired with up to eight Bluetooth

devices. But only one device can be connected at a

time.

● When paired with several devices:

● StreamLine Mic will connect to the r device it

detects.

● To switch to another device, deactivate Bluetooth

on the device(s) that you do not want to use at the

moment.

Page is loading ...

Signia StreamLine Mic User guide

Signia StreamLine Mic User guide

Related papers

Other documents