User Manual
Plate Size
(in)
15.75
x19.69 110V 2kw 48.8(L)x31.50(W)
x24.41(H) 260.15
Voltage Power Dimensions (in) Shipping
Dimensions (in) Weight (lbs.)
Press SET button one time to start adjusting the temperature. Press it again to adjust
time, and press it for the third time to exit the setting interface.
Note: Press and hold SET button will enter parameter setting interface. Do not change
any parameters. Press and hold SET button or power off the machine to exit the
parameter setting interface.
Press this key to decrease the corresponding parameter value after the machine
enters the setting interface.
Press this key to increase the corresponding parameter value after the machine enters the
setting interface.
Press and hold this key to start self-tuning mode (°C or °F symbol will blink on the panel).
Once the machine enters self-tuning mode, do not unplug it or press any keys until self-tuning
has finished. Implement self-tuning after changing the heat plate or thermocouple wire.
Specifications
Control Panel
21 3
4 5 6
Press Handle
Power Switch Pressure Adjustment KnobHeat Plate
Control Panel Fuse
1
2
3
4
5
6
Proxima Dual Heat Press
39.4(L)x26.8(W)
x21.7(H)
-
1
