MerryIoT MS10 User manual

Brand: MerryIoT

Model: MS10

Type: User manual

MerryIoT MS10 is a motion detection device that utilizes LoRaWAN 1.0.3 connectivity to sense and measure movement. It features dual passive infrared detectors with a detection angle of 123°H x 93°V and a range of 7 meters. The device also includes a temperature sensor with an accuracy of ±1°C and a humidity sensor with an accuracy of ±5%. It has a built-in alarm buzzer with a sound pressure level of 80 dB(min) and can be used for both desk and room occupancy detection.

MerryIoT MS10 is a motion detection device that utilizes LoRaWAN 1.0.3 connectivity to sense and measure movement. It features dual passive infrared detectors with a detection angle of 123°H x 93°V and a range of 7 meters. The device also includes a temperature sensor with an accuracy of ±1°C and a humidity sensor with an accuracy of ±5%. It has a built-in alarm buzzer with a sound pressure level of 80 dB(min) and can be used for both desk and room occupancy detection.

MerryIoT Motion Detection

Features

• Compliance to LoRaWAN1.0.3

• Dual Passive Infrared detectors and Fresnel Lens

• IP40 equivalent

• Battery-powered (2 standard AA alkaline batteries)

• Built-in alarm buzzer with sound pressure level 80 dB(min)

• Be notified of possible abnormal movement

• Support both desk and room occupancy

• Power on-and-play installation

• Support coverage test by pressing test button

The MerryIoT Motion Detection utilized with LoRaWAN 1.0.3 connectivity, allows to sense and

measure movement. Applications such as homes or buildings security, facility management

systems, occupancy of the desks, conference rooms, bathrooms, etc.

Specification

Model Name MS10

Frequency EU 868 MHz

US 902~928 MHz

Antenna Gain -2dBi Peak

RF Sensitivity -135dBm

Battery Type 1.5 V AA Alkaline x 2 pcs, 5400 mAh (75ΩCont. discharge)

Battery Lifetime*

About 3 years.

*Note: Battery life is mainly determined by the reporting frequency. Other factors

include moisture and high temperature.

Average Current 135 mA maximum / 100 uA minimum

Protocol LoRaWAN 1.0.3

Operation Temperature 0 to 50°C

Environmental Rating IP40 equivalent

Dimensions 70 mm x 25 mm x 70 mm

Weight 91 g

Sensor

• Dual Passive Infrared detector with Fresnel Lens

• Detection angle: 123°H x 93°V

• Detection range: 7 meters

• Temperature sensor:

• Accuracy: ±(1°C)

• Humidity sensor:

• Accuracy: ±5 %

• Three-axis linear accelerometer

Type Approval CE/FCC/IC approved.

2021 © Browan Communications Inc., All Rights Reserved. This document is for planning purposes only, and is not intended to modify or

supplement any specifications or warranties relating to products of Browan Communications. Browan may make changes to specifications

and descriptions at any time, without notice.

Doc ver.: BQW_03_0036.006

SKU Detail

SKU Country Frequency Band (MHz)

MS10-915 USA US915 (902~928)

MS10-868 Europe EU868 (862~870)

2021 © Browan Communications Inc., All Rights Reserved. This document is for planning purposes only, and is not intended to modify or

supplement any specifications or warranties relating to products of Browan Communications. Browan may make changes to specifications

and descriptions at any time, without notice.

MerryIoT Motion Detection

Doc ver.: BQW_03_0036.006

1
2

MerryIoT MS10 User manual

Brand: MerryIoT

Model: MS10

Type: User manual

MerryIoT MS10 is a motion detection device that utilizes LoRaWAN 1.0.3 connectivity to sense and measure movement. It features dual passive infrared detectors with a detection angle of 123°H x 93°V and a range of 7 meters. The device also includes a temperature sensor with an accuracy of ±1°C and a humidity sensor with an accuracy of ±5%. It has a built-in alarm buzzer with a sound pressure level of 80 dB(min) and can be used for both desk and room occupancy detection.

Related papers

Other documents