Ranger design 1506-MM Installation guide

Brand
Ranger design
Model
1506-MM
Type
Installation guide

Ranger Design 1506-MM is a cargo rack designed for the Mercedes Metris 126" wheelbase. It has a maximum load capacity of 220 lbs and can accommodate up to 6 bars. The rack is easy to install and comes with all the necessary hardware. It is also backed by a lifetime warranty, which gives you peace of mind knowing that your investment is protected.

Here are some of the features and benefits of the Ranger Design 1506-MM:

  • Easy to install: The rack can be installed in just a few minutes using the included hardware.
  • Durable: The rack is made from high-quality materials and is backed by a lifetime warranty.

Ranger Design 1506-MM is a cargo rack designed for the Mercedes Metris 126" wheelbase. It has a maximum load capacity of 220 lbs and can accommodate up to 6 bars. The rack is easy to install and comes with all the necessary hardware. It is also backed by a lifetime warranty, which gives you peace of mind knowing that your investment is protected.

Here are some of the features and benefits of the Ranger Design 1506-MM:

  • Easy to install: The rack can be installed in just a few minutes using the included hardware.
  • Durable: The rack is made from high-quality materials and is backed by a lifetime warranty.
INSTALLATION GUIDE
1506-MM Cargo Rack
Marcedes Metris 126" Wheelbase
Rear Driver Foot ×1
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.2 Verify all parts are present.
15-U4001 BOX
15-U1001 BOX
15-U3001 BOX
15-U2001 BOX
SaDDle extruSion ×8 roller Support “r” ×1
SiDe railS ×2 SiDe railS ×2
Bar ×2
Bar ×6
roller ×1
roller Support “l” ×1
Center Foot ×4
RuBBer Spacer ×8
Front paSSenger Foot ×1 Front Driver Foot ×1Rear paSSenger Foot ×1
cFK - 1 ×1 cFK - 2 ×1 cFK - 3 ×1
For technical support, contact us at 1-800-565-5321 1506-MM Installation Guide | REV. B1 | Page 3
REQUIRED ITEMS
HARDWARE
2
PERSONS
( M8 ) ×16 ( M6 ) ×16 ( M8 ) ×22 ( M8 ) ×32 ( M6 ) ×32 ( M6 ) ×16
( M8 × 65 ) ×16 ( M6 × 25 ) ×16 ( M6 × 16 ) ×16
( M8 ) ×1
( M8 ) ×26
13mm ×2
10mm ×2
For technical support, contact us at 1-800-565-5321 1506-MM Installation Guide | REV. B1 | Page 4
PHASE 2 – INSTALLATION
2.1 INSTALLATION
Front paSSenger
Front Driver
rear paSSenger
rear Driver
center
center
Use M6 × 25
Use M6 × 16
2.1.1 Remove the plug of the OEM holes in the
roof, then check the holes depth. 2.1.3 Attach the front feet.
2.1.2 Position all the feet. 2.1.4 Attach the Center feet.
M6 × 25
or
M6 × 16
M6 × 25
or
M6 × 16
M6
M6
M6
M6
For technical support, contact us at 1-800-565-5321 1506-MM Installation Guide | REV. B1 | Page 5
2×
STEP 1 STEP 2
STEP 3 STEP 4
2.1.5 Connect the 2 side rails parts.
10 NM
For technical support, contact us at 1-800-565-5321 1506-MM Installation Guide | REV. B1 | Page 6
1St SiDe railS
×10
×10
2nD SiDe railS
2.1.7 Install 4 bars in the feet.
2.1.8 Slide 10pcs. of channel nuts in each
side rails.
2.1.9 Attach the 2 side rails on both ends
of the bar, using the 1st, 3rd, 5th & 8th
Channel nuts from the front.
2.1.6 Attach the Rear feet.
2.1.10 Attach the roller to the side rails using
the 2 last channel nuts from the front.
2.1.11 Slide the rack to the appropriate
position.
1"
BacKup caMera
For technical support, contact us at 1-800-565-5321 1506-MM Installation Guide | REV. B1 | Page 7
2.1.12 Center the bar on the vehicle.
PHASE 3 – TIPS
3.1 SAFETY TIPS
MAX
110 lbs
MAX
220 lbs
2.1.13 Attach the remaining 4 bars.
ADD ADD ADD ADD
For technical support, contact us at 1-800-565-5321 1506-MM Installation Guide | REV. B1 | Page 8
“You have successfully installed your
1506-MM Cargo Rack
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ranger design 1506-MM Installation guide

Brand
Ranger design
Model
1506-MM
Type
Installation guide

Ranger Design 1506-MM is a cargo rack designed for the Mercedes Metris 126" wheelbase. It has a maximum load capacity of 220 lbs and can accommodate up to 6 bars. The rack is easy to install and comes with all the necessary hardware. It is also backed by a lifetime warranty, which gives you peace of mind knowing that your investment is protected.

Here are some of the features and benefits of the Ranger Design 1506-MM:

  • Easy to install: The rack can be installed in just a few minutes using the included hardware.
  • Durable: The rack is made from high-quality materials and is backed by a lifetime warranty.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers