2. urban ambiance
  3. UQL4330

urban ambiance UQL4330 Installation guide

  • Hello! I have reviewed the installation instructions for the UQL4330 light fixture. This document outlines the necessary steps for installing the fixture, including mounting the crossbar, attaching the ceiling canopy and shade, wiring connections, and installing the bulbs and candle covers. It also highlights important safety precautions. I'm ready to answer any questions you have about the installation process or the fixture's specifications.
  • What type of bulbs are required for this fixture?
    Are bulbs included with the fixture?
    What should I do before starting the installation?
1 of 3
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG
Ceiling Canopy
with Rod
x 1
D
Socket Assembly
x 1
G
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Light SourceTools Required
4 BULBS REQUIRED
BULBS NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
Shade
x 1
F
Crossbar
Assembly Shade
Table of
Contents
STEP 1 STEP 3
Ceiling Canopy
with Rod
STEP 2
Wiring
STEP 4
Ceiling Canopy
STEP 5
Candle Cover
& Bulb
STEP 6
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Candle Cover
x 4
E
Installation Instructions: UQL4330
www.urbanambiance.com
2 of 3
STEP 1 1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to
mounting screws
STEP 2
STEP 3 1 2
Remove lock balls Install shade
www.urbanambiance.com
3 of 3
STEP 6
STEP 5
STEP 4
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
www.urbanambiance.com
/