urban ambiance UQL4370 Installation guide
- Type
- Installation guide
1of2
LightSourceToolsRequired
4BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
Crossbar Assembly Fixture Body
Table of
Contents
STEP 1 STEP 3
Preparation: Identify and inspect all parts before beginning the installation.
Missing or damaged parts? Contact your original place of purchase.
Wiring
STEP 2
D
Outlet Box Screw
x2
B
Wire Connector
x3
C
STEP 4
Bulb
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
STEP 1 1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to nipple
Installation Instructions: UQL4370
www.urbanambiance.com
2of2
STEP 2
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
STEP 4
www.urbanambiance.com
-
1
-
2
urban ambiance UQL4370 Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI