2. SCE
  3. SCE-60XEL4912LP

SCE SCE-60XEL4912LP Installation Information

  • Hello! I've reviewed the datasheet for Gould Flange Mounted Disconnects and Circuit Breakers. This document provides detailed information on various cutout types, including D1, D2, D7 and D11, and adapter kits. I'm ready to answer your questions about this product.
  • What is the standard cutout for Stock SCE enclosures?
    What does a part number with the letter U at the end indicate?
    What adapter kit is used for D2 cutout with Universal Cutout?
    What adapter kit is used for D1 cutout with Universal Cutout?
Gould Flange Mounted Disconnects and Circuit Breakers
Flange Mounted Operator Handle and Operating Mechanisms, variable depth and cable operated. The D1
Cutout detail is the standard cutout in all Stock SCE enclosures.
*The exception is part numbers with the Letter U at the end (Example: SCE-84XM4018U), this indicates the
Universal Cutout (D7).
Adapter Kits available for use with Universal Cutout, for D2 cutout: SCE-UA400V and for D1 cutout: SCE-UAV.
HANDLE /
OPERATOR
CUTOUT
DETAIL
GOULD D10 D11
2.875
1.25
4.688
0.50
0.563
0.281
D1
6.50
5.00
0.94
0.56
0.50
0.328
D2
1.125
0.438
0.438
1.375
8.00
7.125
0.218
D7
5.375
4.38
0.50
0.50
1.06
0.438
D11
/