Intermec BU-2073-J Instructions Manual

Type
Instructions Manual

This manual is also suitable for

USB Bluetooth Adapter
Adaptador USB Bluetooth
Instructions
Instruções
ii
Contents
USB Bluetooth Adapter Instructions . . . . . . . . . . . . . . . . . . 3
Instruções para uso do adaptador USB Bluetooth. . . . . . . . 13
3
USB Bluetooth Adapter Instructions
The USB Bluetooth™ Adapter (Model BU-2073-J) (P/N 203-
771-xxx) lets you connect an SF51 or SR61 Cordless Scanner to
your host PC. Your shipping contents include these items:
USB Bluetooth adapter
Sheet of three Bluetooth association bar codes
These instructions
If you need a software wedge tool, Intermec recommends
Intermec SmartWedge™. SmartWedge allows you to scan data
directly to your host PC application. To order SmartWedge,
contact your local Intermec sales representative.
Before you get started, you need to:
•install EasySet
®
version 5.4.1 or later. EasySet is available on
the CD that ships with the scanner or from the Intermec web
site at www.intermec.com.
note the Bluetooth address of your scanner.
SF51 Bluetooth Address SR61 Bluetooth Address
Note: Bluetooth is a trademark owned by Bluetooth
SIG, Inc., USA.
See Compliance Insert for use restrictions
associated with this product.
Bluetooth
address
BDA: xxxxxxxxxxxxxxxxx
XXXXXXXXXXXX
SN
:
X
X
X
XXX
X
X
X
X
X
C
N
:
X
X
X
X
X
X
X
X
X
M
ad
e
in
U
.S.A
.
Interm
e
c Te
chnologies Corporation
E
ve
re
tt
, WA
9
8
2
0
3
M
OD
E
L: SR
51
M
FD
: X
X
X
XXX
X
X
X
2XXX
Bluetooth
address
4
note the Bluetooth address of your Bluetooth adapter.
Bluetooth Adapter Bluetooth Address
To use the Bluetooth adapter
1 Install the Bluetooth adapter on your host PC.
2 (Microsoft Windows XP with SP1 and Microsoft Windows
2000 only) Set up your Bluetooth COM port.
3 Pair your scanner with your host PC, and create a Bluetooth
connection between your scanner and host PC.
4 Collect data with your scanner.
These instructions describe how to perform each step depending
on whether your host PC is running Microsoft Windows XP
with SP2, Microsoft Windows XP with SP1, or Microsoft
Windows 2000.
Microsoft Windows XP with SP2
Follow these procedures to use your SF51 or SR61 with your host
PC running Microsoft Windows XP with SP2.
Installing the Bluetooth Adapter
Insert the adapter into a USB port on your PC. Windows XP
automatically detects and installs the adapter.
Pairing Your Scanner and Host PC
If you are planning on using the scanner with your host PC on a
regular basis, you should pair the two devices. Pairing saves
connection information between the scanner and your host PC.
To pair your scanner with your host PC
1 Press the Scan button or pull the trigger on your scanner. The
scanner enters a discoverable state.
2 On your PC desktop, double-click the Bluetooth icon on the
taskbar. The Bluetooth Devices window appears.
Bluetooth v2.0
Model: BU-2073-J CE0681
FCC ID:QQCBU2073J
BD:
000A35A5F2C3C3308T60944
USB Adaptor
Bluetooth
address
5
3 Click Add. The Add Bluetooth Device wizard appears.
4 Follow the onscreen instructions.
When you get to the passkey step, select Use the passkey
found in the documentation, and enter the default
Bluetooth PIN, which is 0000.
5 Click Next. The Bluetooth Device wizard verifies the passkey,
and then the final screen of the wizard appears.
6 Note the COM ports that are being used for incoming and
outgoing communication and click Finish.
Connecting Your Scanner to Your Host PC
There are two ways to create a Bluetooth connection:
Connect from your scanner. Using this method, you can only
connect one scanner to your host PC. When you place the
SF51 in a 1-bay charger or remove and install the battery in
an SR61, the scanner resets and the Bluetooth connection is
lost. After the scanner resets, it automatically reconnects to
your host PC.
Connect from your host PC. Using this method, you can
connect more than one scanner to your host PC.
Connecting From Your Scanner
You can connect from your scanner to your data collection
application or EasySet on your host PC. This section describes
how to connect to EasySet.
To connect from your scanner to EasySet on your host PC
1 To turn on your scanner, press the Scan button or pull the
trigger.
2 Scan the Bluetooth association bar code that ships with the
adapter.
The scanner beeps once, the green status light flashes once,
and the blue Intermec Ready-to-Work™ indicator starts
blinking.
3 Start EasySet version 5.4.1 or later. Make sure that SF51 or
SR61 is selected as your product.
6
4 To verify your connection with EasySet, select
Communication > Connect. The Online Setup dialog box
appears.
5 Select the incoming COM port that you previously noted and
click OK.
When the scanner connects to your host PC, it emits a series
of beeps from low to high, and the blue Intermec Ready-to-
Work indicator turns on and stays on.
6 To disconnect from EasySet, select Communication >
Disconnect.
The scanner disconnects from EasySet, emits a series of beeps
from high to low, and the blue Intermec Ready-to-Work
indicator starts blinking.
You are now ready to connect to your application. The method
for connecting depends on your data collection application.
To disconnect from your host PC
•Scan this bar code:
Bluetooth Device Disconnect
\60\02\52\05\00\00\06\00\00\00\00\00\00\00\00\00
The scanner disconnects from your host PC, emits a series of
beeps from high to low, and the blue Intermec Ready-to-Work
indicator turns off.
Connecting From Your PC
You can connect from your PC through your data collection
application or EasySet. This section describes how to connect
using EasySet.
To connect from your PC using EasySet
1 To turn on your scanner, press the Scan button or pull the
trigger. The scanner enters a discoverable state.
2 Start EasySet version 5.4.1 or later. Make sure that SF51 or
SR61 is selected as your product.
7
3 Select Communication > Connect. The Online Setup dialog
box appears.
4 Select the outgoing COM port that you previously noted and
click OK.
When the scanner connects to your host PC, it emits a series
of beeps from low to high, and the blue Intermec Ready-to-
Work indicator turns on and stays on.
5 To disconnect from EasySet, select Communication >
Disconnect.
Collecting Data With Your Scanner
1 If necessary, configure your data collection application to
receive data from the incoming (connecting from your
scanner) or outgoing (connecting from host PC) COM port
that you previously noted.
2 Connect to your PC from your scanner and start your data
collection application.
Or, connect to your scanner from your host PC using your
data collection application.
3 Scan a bar code with your scanner. The data is entered into
your application.
Microsoft Windows XP with SP1 and Microsoft
Windows 2000
Follow these procedures to use your SF51 or SR61 with your host
PC running Microsoft Windows XP with SP1 or Microsoft
Windows 2000.
Installing the Bluetooth Adapter
1 Go to the Intermec web site at www.intermec.com.
2 From the Service & Support menu, select Downloads.
3 From the Select A Product drop-down list, choose the SF51
or SR61 scanner.
Note: Do not insert the adapter until you are
prompted to by the software.
8
4 Click the link to download the Windows Driver for USB
Bluetooth Adapter (P/N 203-771-xxx), and save the software
to your PC.
5 Install the Windows Driver software on your PC, and follow
the onscreen instructions.
When prompted, insert the Bluetooth adapter into a USB
port on your PC and click OK. When the installation is
complete, a message box appears telling you to restart your
system.
6 Click Yes to reboot your PC. The Windows drivers and
Bluetooth Settings application are installed.
Setting Up Your Bluetooth COM Port
1 On your PC desktop, from the Start menu, select Settings >
Control Panel.
2 Double-click Bluetooth Local COM.
3 In the Existing COM Ports list, find the COM port whose
owner is LocalCOM-Server.
4 Select the COM port, and click Delete. A message box
appears.
5 Click Yes to confirm that you want to delete the COM port.
6 Click Add. The Bluetooth Local COM Setup Wizard
appears.
7 On the first screen of the wizard, select Create a Bluetooth
virtual COM port for a server.
9
8 Follow the onscreen instructions to create the COM port.
9 Note the COM ports for the LocalCOM-Server and the
LocalCOM-Client.
10 To close the Bluetooth Local COM window, click OK.
11 Close the Control Panel.
Connecting and Pairing Your Scanner and Host PC
Pairing saves connection information between the scanner and
your host PC. Your scanner and host PC are automatically paired
the first time you create a Bluetooth connection.
There are two ways to create a Bluetooth connection:
Connect from your scanner. Using this method, you can only
connect one scanner to your host PC. When you place the
SF51 in a 1-bay charger or remove and install the battery in
an SR61, the scanner resets and the Bluetooth connection is
lost. After the scanner resets, it automatically reconnects to
your host PC.
Connect from your host PC. Using this method, you can
connect more than one scanner to your host PC.
Connecting From Your Scanner
1 Start your data collection application.
2 Select the LocalCOM-Server COM port that you noted in
Step 9 of the previous procedure.
3 To turn on your scanner, press the Scan button or pull the
trigger.
4 Scan the Bluetooth association bar code that ships with the
adapter.
The first time you connect, the scanner beeps once and the
green status light flashes once.
When the Bluetooth Manager window appears, in the BT
Security field, enter 0000 and click OK.
The scanner connects to your host PC, emits a series of beeps
from low to high, and the blue Intermec Ready-to-Work
indicator turns on and stays on.
10
To disconnect
•Scan this bar code:
Bluetooth Device Disconnect
\60\02\52\05\00\00\06\00\00\00\00\00\00\00\00\00
The scanner disconnects from your host PC, emits a series of
beeps from high to low, and the blue Intermec Ready-to-Work
indicator turns off.
To determine the Bluetooth COM port
1 Double-click the Bluetooth icon on the taskbar. The
Bluetooth Settings window appears.
2 Select your SF51 or SR61, and click the Detail button.
3 Note the COM port listed in the Port Name field.
Connecting From Your PC
1 Press the Scan button or pull the trigger on your scanner. The
scanner enters a discoverable state.
2 On your PC desktop, right-click the Bluetooth icon on the
taskbar and select Add New Connection. The Add New
Connection Wizard appears.
3 Select Custom Mode, and click Next. The wizard searches for
Bluetooth devices.
4 In the Bluetooth Device list, select your scanner, and click
Next. The wizard tries to connect to your scanner, and the
Bluetooth Manager - Bluetooth Security box appears.
5 In the Bluetooth Passkey (PIN) field, enter the default
Bluetooth PIN, which is 0000 and click OK.
6 In the Service Selection list, make sure that Serial Port is
selected, and click Next.
7 In the Assignment of COM Port Name box, deselect the Use
default COM port check box. A message box appears
recommending using the default setting.
8 Click OK.
11
9 From the COM port drop-down list box, select the
LocalCOM-Client COM port that you noted in Step 9 on
page 9.
10 Click Next, and click Next again. The Enter a name and
select an icon window appears.
11 (Optional) Change the information in the Setting
information box, and click Next.
12 Click Finish. Your scanner appears in the Bluetooth Settings
application.
13 Right-click your scanner, and select Connect.
Your PC connects to your scanner, your scanner emits a series
of beeps from low to high, and the blue Intermec Ready-to-
Work indicator turns on and stays on.
To disconnect
From the Bluetooth Settings application, right-click your
scanner, and select Disconnect.
The scanner disconnects from your host PC, emits a series of
beeps from high to low, and the blue Intermec Ready-to-
Work indicator turns off.
Collecting Data With Your Scanner
1 Start your data collection application.
2 If necessary, configure your data collection application to
receive data from the Bluetooth COM port.
3 Scan a bar code with your scanner. The data is entered into
your application.
For more information about Bluetooth Settings, see the
Bluetooth Settings online help.
14
Endereço Bluetooth do SF51 Endereço Bluetooth do SR61
anotar o endereço Bluetooth do adaptador Bluetooth.
Endereço Bluetooth do adaptador Bluetooth
Para usar o adaptador Bluetooth
1 Instale o adaptador Bluetooth no PC host.
2 (apenas Microsoft Windows XP com SP1 e Microsoft
Windows 2000) Configure a porta de comunicação
Bluetooth.
3 Emparelhe o leitor com o PC host e crie uma conexão
Bluetooth entre os dois.
4 Colete dados com o leitor.
Estas instruções descrevem como executar cada etapa,
dependendo do sistema operacional do PC host: Microsoft
Windows XP com SP2, Microsoft Windows XP com SP1 ou
Microsoft Windows 2000.
Endereço
Bluetooth
BDA: xxxxxxxxxxxxxxxxx
XXXXXXXXXXXX
SN
:
X
X
X
X
X
X
X
XX
X
X
C
N
:
X
X
X
X
X
X
X
X
X
M
ad
e
in
U
.
S
.A
.
Inter
m
e
c Tech
nol
ogie
s
C
orp
o
ra
ti
on
E
v
e
r
e
t
t,
W
A
9
8
2
0
3
M
O
D
E
L: S
R5
1
M
F
D
: X
X
X
X
X
XX
X
X2X
X
X
Endereço
Bluetooth
Bluetooth v2.0
Model: BU-2073-J CE0681
FCC ID:QQCBU2073J
BD:
000A35A5F2C3C3308T60944
USB Adaptor
Endereço
Bluetooth
USB Bluetooth Adapter Instructions
*074479-007*
P/N 074479-007
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2007 Intermec Technologies
Corporation. All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Intermec BU-2073-J Instructions Manual

Type
Instructions Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages